django-mailer 1.2.6

A reusable Django app for queuing the sending of email

=====
Usage
=====

First, add "mailer" to your ``INSTALLED_APPS`` in your settings.py.
Run ``./manage.py migrate`` to install models.

Using EMAIL_BACKEND
===================

This is the preferred and easiest way to use django-mailer.

To automatically switch all your mail to use django-mailer, first set
EMAIL_BACKEND::

EMAIL_BACKEND = "mailer.backend.DbBackend"

If you were previously using a non-default EMAIL_BACKEND, you need to configure
the MAILER_EMAIL_BACKEND setting, so that django-mailer knows how to actually send
the mail::

MAILER_EMAIL_BACKEND = "your.actual.EmailBackend"

Now, just use the normal `Django mail functions
<https://docs.djangoproject.com/en/stable/topics/email/>`_ for sending email. These
functions will store mail on a queue in the database, which must be sent as
below.

Explicitly putting mail on the queue
====================================

If you don't want to send all email through django-mailer, you can send mail
using ``mailer.send_mail``, which has the same signature as Django's
``send_mail`` function.

You can also do the following::

# favour django-mailer but fall back to django.core.mail
from django.conf import settings

if "mailer" in settings.INSTALLED_APPS:
from mailer import send_mail
else:
from django.core.mail import send_mail

and then just call send_mail like you normally would in Django::

send_mail(subject, message_body, settings.DEFAULT_FROM_EMAIL, recipients)

There is also a convenience function ``mailer.send_html_mail`` for creating HTML
(this function is **not** in Django)::

send_html_mail(subject, message_plaintext, message_html, settings.DEFAULT_FROM_EMAIL, recipients)

Additionally you can send all the admins as specified in the ``ADMIN``
setting by calling::

mail_admins(subject, message_body)

or all managers as defined in the ``MANAGERS`` setting by calling::

mail_managers(subject, message_body)

Clear queue with command extensions
===================================

With mailer in your INSTALLED_APPS, there will be three new manage.py commands
you can run:

* ``send_mail`` will clear the current message queue. If there are any
failures, they will be marked deferred and will not be attempted again by
``send_mail``.

* ``retry_deferred`` will move any deferred mail back into the normal queue
(so it will be attempted again on the next ``send_mail``).

* ``purge_mail_log`` will remove old successful message logs from the database, to prevent it from filling up your database


You may want to set these up via cron to run regularly::


* * * * * (/path/to/your/python /path/to/your/manage.py send_mail >> ~/cron_mail.log 2>&1)
0,20,40 * * * * (/path/to/your/python /path/to/your/manage.py retry_deferred >> ~/cron_mail_deferred.log 2>&1)
0 0 * * * (/path/to/your/python /path/to/your/manage.py purge_mail_log 7 >> ~/cron_mail_purge.log 2>&1)

For use in Pinax, for example, that might look like::

* * * * * (cd $PINAX; /usr/local/bin/python2.5 manage.py send_mail >> $PINAX/cron_mail.log 2>&1)
0,20,40 * * * * (cd $PINAX; /usr/local/bin/python2.5 manage.py retry_deferred >> $PINAX/cron_mail_deferred.log 2>&1)
0 0 * * * (cd $PINAX; /usr/local/bin/python2.5 manage.py purge_mail_log 7 >> $PINAX/cron_mail_purge.log 2>&1)

This attempts to send mail every minute with a retry on failure every 20
minutes, and purges the mail log for entries older than 7 days.

``manage.py send_mail`` uses a lock file in case clearing the queue takes
longer than the interval between calling ``manage.py send_mail``.

Note that if your project lives inside a virtualenv, you also have to execute
this command from the virtualenv. The same, naturally, applies also if you're
executing it with cron. The `Pinax documentation`_ explains that in more
details.

.. _pinax documentation: http://pinaxproject.com/docs/dev/deployment.html#sending-mail-and-notices

Controlling the delivery process
================================

If you wish to have a finer control over the delivery process, which defaults
to deliver everything in the queue, you can use the following 3 variables
(default values shown)::

MAILER_EMAIL_MAX_BATCH = None # integer or None
MAILER_EMAIL_MAX_DEFERRED = None # integer or None
MAILER_EMAIL_THROTTLE = 0 # passed to time.sleep()

These control how many emails are sent successfully before stopping the
current run `MAILER_EMAIL_MAX_BATCH`, after how many failed/deferred emails
should it stop `MAILER_EMAIL_MAX_DEFERRED` and how much time to wait between
each email `MAILER_EMAIL_THROTTLE`.

Unprocessed emails will be evaluated in the following delivery iterations.

Other settings
==============

If you need to be able to control where django-mailer puts its lock file (used
to ensure mail is not sent twice), you can set ``MAILER_LOCK_PATH`` to a full
absolute path to the file to be used as a lock. The extension ".lock" will be
added. The process running ``send_mail`` needs to have permissions to create and
delete this file, and others in the same directory. With the default value of
``None`` django-mailer will use a path in current working directory.

If you need to change the batch size used by django-mailer to save messages in
``mailer.backend.DbBackend``, you can set ``MAILER_MESSAGES_BATCH_SIZE`` to a
value more suitable for you. This value, which defaults to `None`, will be passed to
`Django's bulk_create method <https://docs.djangoproject.com/en/stable/ref/models/querysets/#bulk-create>`_
as the `batch_size` parameter.
Change log
==========

1.2.6 - 2019-04-03
------------------

* Official Django 2.1 and 2.2 support.
* Don't close DB connection in management commands.
This is unnecessary with modern Django.

1.2.5
-----

* Fixed packaging file permission problems.
* Added Japanese locale (thanks msk7777)

1.2.4
-----

* Django 2.0 support.

1.2.3
-----

* Fixed crasher with models ``__str__``

1.2.2
-----

* Django 1.10 support.
* Fixed reprs for Message and MessageLog.

1.2.1
-----

* More helpful admin for Message and MessageLog
* Handle exceptions from really old Django versions

1.2.0
-----

* Save the ``Message-ID`` header on ``Message`` explicitly to enable finding
emails using this identifier.

This includes a database schema migration.


1.1.0
-----

* Deprecated calling ``send_mail`` and ``send_html_mail`` using ``priority``
kwargs ``"high"``, ``"medium"``, and ``"low"``. Instead you should use
``PRIORITY_HIGH``, ``PRIORITY_MEDIUM`` and ``PRIORITY_LOW`` from
``mailer.models``.

* Fixed bug with migrations for Django 1.7, which wanted to create a migration
to 'fix' the EmailField length back down to 75 instead of 254.


1.0.1
-----

* Included migrations - for both South and Django 1.7 native migrations.

Note:

* If you use South, you will need at least South 1.0
* You will need to use '--fake' or '--fake-initial' on existing installations.

These migrations were supposed to be in 1.0.0 but were omitted due to a
packaging error.

1.0.0
-----

* Throttling of email sending
* Django 1.8 support
* Admin tweaks and improvements
* Various other fixes, especially from Renato Alves <[e-mail]> - thank you!

0.1.0
-----

* First PyPI version