ElecSolver
Overview
ElecSolver formalizes electric systems as linear problems, suitable for both temporal and frequency-domain studies. It focuses on constructing the linear system representation, leaving the actual numerical resolution to the user.
This repository is not a general-purpose electrical system solver. Instead, it acts as a bridge between:
- The graph-based description of an electric network
- The corresponding sparse linear system to solve
Its main goal is to provide a friendly Python interface for simulating analog electric systems. While suitable for small circuit simulations, its strength lies in scalability—handling millions of nodes and components, provided that you possess sufficient computational resources.
Table of content
How to install
For now this package is distributed on pypi and can be installed using pip
pip install ElecSolver
For solving the linear systems we advise using MUMPS through pyMUMPS on linux that can be installed via pip
pip install pymumps
Components
FrequencySystemBuilder
This class handles frequency-domain analysis of linear electric systems.
Features
- Supports tension and intensity sources
- Models inductive and resistive mutuals
- Detects and couples multiple subsystems
- Accepts arbitrary complex impedances and mutuals
- Constructs sparse linear systems (COO format)
Example
We would like to study the following system:
this can simply be defined in the following manner (We took R=1, L=1 and M=2):
import numpy as np
from scipy.sparse.linalg import spsolve
from ElecSolver import FrequencySystemBuilder
# Complex and sparse impedance matrix
# notice coil impedence between points 0 and 2, and coil impedence between 3 and 4
impedence_coords = np.array([[0,0,1,3],[1,2,2,4]], dtype=int)
impedence_data = np.array([1, 1j, 1, 1j], dtype=complex)
# Mutual inductance or coupling
# The indexes here are the impedence indexes in impedence_data
# The coupling is inductive
mutuals_coords = np.array([[1],[3]], dtype=int)
mutuals_data = np.array([2.j], dtype=complex)
electric_sys = FrequencySystemBuilder(
impedence_coords,
impedence_data,
mutuals_coords,
mutuals_data
)
# Set node masses
# 2 values because 2 subsystems
electric_sys.set_mass(0, 3)
# Building system
electric_sys.build_system()
electric_sys.build_second_member_intensity(intensity=10, input_node=2, output_node=0)
# Get and solve the system
sys, b = electric_sys.get_system()
sol = spsolve(sys.tocsr(), b)
intensities, potentials = electric_sys.build_intensity_and_voltage_from_vector(sol)
## We see a tension appearing on the lonely coil (between node 3 and 4)
print(potentials[3]-potentials[4])
Adding a Parallel Resistance
We want to add components in parallel with existing components for instance inserting a resistor in parallel with the first inductance (between nodes 0 and 2)
In python, simply add the resistance to the list of impedence in the very first lines of the script:
import numpy as np
from scipy.sparse.linalg import spsolve
from ElecSolver import FrequencySystemBuilder
# We add an additionnal resistance between 0 and 2
impedence_coords = np.array([[0,0,1,3,0],[1,2,2,4,2]], dtype=int)
impedence_data = np.array([1, 1j,1, 1j,1], dtype=complex)
# No need to change the couplings since indexes of the coils did not change
mutuals_coords = np.array([[1],[3]], dtype=int)
mutuals_data = np.array([2.j], dtype=complex)
TemporalSystemBuilder
This class models time-dependent systems using resistors, capacitors, coils, and mutuals.
Features
- Supports tension and intensity sources
- Models inductive and resistive mutuals
- Detects and couples multiple subsystems
- Accepts 3 dipole types: resistances, capacities and coils
- Constructs sparse linear systems (COO format)
Example
We would like to study the following system:
with R=1, L=0.1, C=2 this gives:
import numpy as np
from scipy.sparse.linalg import spsolve
from ElecSolver import TemporalSystemBuilder
## Defining resistances
res_coords = np.array([[0,2],[1,3]],dtype=int)
res_data = np.array([1,1],dtype=float)
## Defining coils
coil_coords = np.array([[1,0],[3,2]],dtype=int)
coil_data = np.array([0.1,0.1],dtype=float)
## Defining capacities
capa_coords = np.array([[1,3],[2,0]],dtype=int)
capa_data = np.array([2,2],dtype=float)
## Defining empty mutuals here
mutuals_coords=np.array([[],[]],dtype=int)
mutuals_data = np.array([],dtype=float)
res_mutuals_coords=np.array([[],[]],dtype=int)
res_mutuals_data = np.array([],dtype=float)
## initializing system
elec_sys = TemporalSystemBuilder(coil_coords,coil_data,res_coords,res_data,capa_coords,capa_data,mutuals_coords,mutuals_data,res_mutuals_coords,res_mutuals_data)
## Seting mass at point 0
elec_sys.set_mass(0)
## Build second member
elec_sys.build_system()
elec_sys.build_second_member_intensity(10,1,0)
# getting initial condition system
S_i,b = elec_sys.get_init_system()
# initial condition
sol = spsolve(S_i.tocsr(),b)
# get system (S1 is real part, S2 derivative part)
S1,S2,rhs = elec_sys.get_system()
## Solving using euler implicit scheme
dt=0.08
vals_res1 = []
vals_res2 = []
for i in range(50):
currents_coil,currents_res,currents_capa,voltages,_ = elec_sys.build_intensity_and_voltage_from_vector(sol)
vals_res1.append(currents_res[1])
vals_res2.append(currents_res[0])
## implicit euler time iterations
sol = spsolve(S2+dt*S1,b*dt+S2@sol)
import matplotlib.pyplot as plt
plt.xlabel("Time")
plt.ylabel("Intensity")
plt.plot(vals_res1,label="intensity res 1")
plt.plot(vals_res2,label="intensity res 2")
plt.legend()
plt.savefig("intensities_res.png")
This outputs the following graph that displays the intensity passing through the resistances
Solver suggestions
- For small or moderately sized systems, the built-in
scipy.sparse.linalg.spsolveis effective. - For large-scale temporal problems, consider using MUMPS (via
pyMUMPS). MUMPS is more efficient when only the second member (b) changes during time-stepping.
Metadata
Release files for ElecSolver 0.1.3
For a detailed explanation of source distributions (sdists) and built distributions (wheels), please see the package formats documentation.
Built distribution (wheel)
| File | Interpreter | ABI | Platform | Actions Reset |
|---|---|---|---|---|
| elecsolver-0.1.3-py3-none-any.whl | Python 3 | none | any | Details for elecsolver-0.1.3-py3-none-any.whl |
Release files / elecsolver-0.1.3-py3-none-any.whl
| Download URL | elecsolver-0.1.3-py3-none-any.whl |
|---|---|
| Size | 15.3 kB |
| Tags | Python 3 |
|
SHA-256 checksum How to use checksums |
b303340090fe7e4d1b95524a7f5855c8a538f0af14339bb3c49efd4da1f191ad
|
|
BLAKE2b-256 checksum How to use checksums |
7e9e41971ed8748bb70eec4c4e35e10ce1ed6e877d57022498d8e2dc9f07f6a2
|
| Upload date | |
|
Uploaded using Trusted Publishing? What is trusted publishing? |
Yes |
| Uploaded via |
twine/6.1.0 CPython/3.12.9
|
Provenance
Provenance describes where a file came from. On PyPI, provenance is shared via attestations, which provide a verifiable record of the build or publishing details. View details, limitations and caveats.
PyPI Publish Attestation
PyPI verified that this artifact, at this checksum, originated from the publisher listed below.
Signed by GitHub Actions, verified by PyPI on Jul 4, 2025.
Transparency logSecurity for ElecSolver 0.1.3
Provenance
Provenance describes where a file came from. On PyPI, provenance is shared via attestations, which provide a verifiable record of the build or publishing details. View details, limitations and caveats.
Full provenance
1 file in this release has been uploaded with provenance metadata.
Attestation for elecsolver-0.1.3-py3-none-any.whl
PyPI Publish Attestation
PyPI verified that this artifact, at this checksum, originated from the publisher listed below.
Signed by GitHub Actions, verified by PyPI on Jul 4, 2025.
Transparency logA note on package security
PyPI is a repository for distributing packages, not a service for auditing them. While third-party security researchers and our staff do their best to detect and remove malicious packages, PyPI cannot guarantee the quality, security or suitability of any given package.
To learn more about protecting yourself from malicious actors, visit our package security documentation.