Project description
Python EnOcean
A Python library for reading and controlling EnOcean devices.
It started as a part of the Forget Me Not
design challenge @ element14 .
This fork was created, because the original repo seems to be inactive, and i needed
to add EEPs to make some devices usable in Home Assistant .
Install
If not installed already, install pip by running
sudo apt-get install python-pip
After pip is installed, install the module by running
sudo pip install enocean4ha (or sudo pip install git+https://github.com/topic2k/enocean4ha.git if you want the "bleeding edge").
After this, it's just a matter of running enocean_example.py and pressing the
learn button on magnetic contact or temperature switch or pressing the rocker switch.
You should be displayed with a log of the presses, as well as parsed values
(assuming the sensors are the ones provided in the EnOcean Starter Kit ).
The example script can be stopped by pressing CTRL+C
Supported profiles
All profiles (should) correspond to the official EEP by EnOcean.
RPS Telegram (0xF6)
1BS Telegram (0xD5)
4BS Telegram (0xA5)
VLD Telegram (0xD2)
RPS Telegram (0xF6)
RORG 0xF6 - FUNC 0x01 - TYPE 0x01 - Push Button
shortcut
description
type
values
PB
Status of the push button
enum
0 - Released
1 - Pressed
RORG 0xF6 - FUNC 0x02 - TYPE 0x01 - Light and Blind Control - Application Style 1
shortcut
description
type
values
R1
Rocker 1st action
enum
0 - Button AI
1 - Button AO
2 - Button BI
3 - Button BO
EB
Energy bow
enum
0 - released
1 - pressed
R2
Rocker 2nd action
enum
0 - Button AI
1 - Button AO
2 - Button BI
3 - Button BO
SA
2nd action
enum
0 - No 2nd action
1 - 2nd action valid
T21
T21
status
NU
NU
status
RORG 0xF6 - FUNC 0x02 - TYPE 0x02 - Light and Blind Control - Application Style 2
shortcut
description
type
values
R1
Rocker 1st action
enum
0 - Button AI
1 - Button AO
2 - Button BI
3 - Button BO
EB
Energy bow
enum
0 - released
1 - pressed
R2
Rocker 2nd action
enum
0 - Button AI
1 - Button AO
2 - Button BI
3 - Button BO
SA
2nd action
enum
0 - No 2nd action
1 - 2nd action valid
T21
T21
status
NU
NU
status
RORG 0xF6 - FUNC 0x05 - TYPE 0x01 - Liquid Leakage Sensor (mechanic harvester)
shortcut
description
type
values
WAS
Water Sensor
enum
0-16 - not specified
17 - Water detected
18-255 - not specified
T21
T21
status
NU
NU
status
RORG 0xF6 - FUNC 0x05 - TYPE 0x02 - Smoke Detector
shortcut
description
type
values
SMO
Status of detection and battery
enum
0 - Smoke Alarm OFF
16 - Smoke Alarm ON
48 - Energy LOW
RORG 0xF6 - FUNC 0x10 - TYPE 0x00 - Window Handle
shortcut
description
type
values
WIN
Window handle
enum
0 - Moved from up to vertical
1 - Moved from vertical to up
2 - Moved from down to vertical
3 - Moved from vertical to down
T21
T21
status
NU
NU
status
1BS Telegram (0xD5)
RORG 0xD5 - FUNC 0x00 - TYPE 0x01 - Single Input Contact
shortcut
description
type
values
CO
Contact
enum
0 - open
1 - closed
4BS Telegram (0xA5)
RORG 0xA5 - FUNC 0x02 - TYPE 0x01 - Temperature Sensor Range -40°C to 0°C
shortcut
description
type
values
TMP
Temperature (linear)
value
255.0-0.0 ↔ -40.0-0.0 °C
RORG 0xA5 - FUNC 0x02 - TYPE 0x02 - Temperature Sensor Range -30°C to +10°C
shortcut
description
type
values
TMP
Temperature (linear)
value
255.0-0.0 ↔ -30.0-10.0 °C
RORG 0xA5 - FUNC 0x02 - TYPE 0x03 - Temperature Sensor Range -20°C to +20°C
shortcut
description
type
values
TMP
Temperature (linear)
value
255.0-0.0 ↔ -20.0-20.0 °C
RORG 0xA5 - FUNC 0x02 - TYPE 0x04 - Temperature Sensor Range -10°C to +30°C
shortcut
description
type
values
TMP
Temperature (linear)
value
255.0-0.0 ↔ -10.0-30.0 °C
RORG 0xA5 - FUNC 0x02 - TYPE 0x05 - Temperature Sensor Range 0°C to +40°C
shortcut
description
type
values
TMP
Temperature (linear)
value
255.0-0.0 ↔ 0.0-40.0 °C
RORG 0xA5 - FUNC 0x02 - TYPE 0x06 - Temperature Sensor Range +10°C to +50°C
shortcut
description
type
values
TMP
Temperature (linear)
value
255.0-0.0 ↔ 10.0-50.0 °C
RORG 0xA5 - FUNC 0x02 - TYPE 0x07 - Temperature Sensor Range +20°C to +60°C
shortcut
description
type
values
TMP
Temperature (linear)
value
255.0-0.0 ↔ 20.0-60.0 °C
RORG 0xA5 - FUNC 0x02 - TYPE 0x08 - Temperature Sensor Range +30°C to +70°C
shortcut
description
type
values
TMP
Temperature (linear)
value
255.0-0.0 ↔ 30.0-70.0 °C
RORG 0xA5 - FUNC 0x02 - TYPE 0x09 - Temperature Sensor Range +40°C to +80°C
shortcut
description
type
values
TMP
Temperature (linear)
value
255.0-0.0 ↔ 40.0-80.0 °C
RORG 0xA5 - FUNC 0x02 - TYPE 0x0A - Temperature Sensor Range +50°C to +90°C
shortcut
description
type
values
TMP
Temperature (linear)
value
255.0-0.0 ↔ 50.0-90.0 °C
RORG 0xA5 - FUNC 0x02 - TYPE 0x0B - Temperature Sensor Range +60°C to +100°C
shortcut
description
type
values
TMP
Temperature (linear)
value
255.0-0.0 ↔ 60.0-100.0 °C
RORG 0xA5 - FUNC 0x02 - TYPE 0x10 - Temperature Sensor Range -60°C to +20°C
shortcut
description
type
values
TMP
Temperature (linear)
value
255.0-0.0 ↔ -60.0-20.0 °C
RORG 0xA5 - FUNC 0x02 - TYPE 0x11 - Temperature Sensor Range -50°C to +30°C
shortcut
description
type
values
TMP
Temperature (linear)
value
255.0-0.0 ↔ -50.0-30.0 °C
RORG 0xA5 - FUNC 0x02 - TYPE 0x12 - Temperature Sensor Range -40°C to +40°C
shortcut
description
type
values
TMP
Temperature (linear)
value
255.0-0.0 ↔ -40.0-40.0 °C
RORG 0xA5 - FUNC 0x02 - TYPE 0x13 - Temperature Sensor Range -30°C to +50°C
shortcut
description
type
values
TMP
Temperature (linear)
value
255.0-0.0 ↔ -30.0-50.0 °C
RORG 0xA5 - FUNC 0x02 - TYPE 0x14 - Temperature Sensor Range -20°C to +60°C
shortcut
description
type
values
TMP
Temperature (linear)
value
255.0-0.0 ↔ -20.0-60.0 °C
RORG 0xA5 - FUNC 0x02 - TYPE 0x15 - Temperature Sensor Range -10°C to +70°C
shortcut
description
type
values
TMP
Temperature (linear)
value
255.0-0.0 ↔ -10.0-70.0 °C
RORG 0xA5 - FUNC 0x02 - TYPE 0x16 - Temperature Sensor Range 0°C to +80°C
shortcut
description
type
values
TMP
Temperature (linear)
value
255.0-0.0 ↔ 0.0-80.0 °C
RORG 0xA5 - FUNC 0x02 - TYPE 0x17 - Temperature Sensor Range +10°C to +90°C
shortcut
description
type
values
TMP
Temperature (linear)
value
255.0-0.0 ↔ 10.0-90.0 °C
RORG 0xA5 - FUNC 0x02 - TYPE 0x18 - Temperature Sensor Range +20°C to +100°C
shortcut
description
type
values
TMP
Temperature (linear)
value
255.0-0.0 ↔ 20.0-100.0 °C
RORG 0xA5 - FUNC 0x02 - TYPE 0x19 - Temperature Sensor Range +30°C to +110°C
shortcut
description
type
values
TMP
Temperature (linear)
value
255.0-0.0 ↔ 30.0-110.0 °C
RORG 0xA5 - FUNC 0x02 - TYPE 0x1A - Temperature Sensor Range +40°C to +120°C
shortcut
description
type
values
TMP
Temperature (linear)
value
255.0-0.0 ↔ 40.0-120.0 °C
RORG 0xA5 - FUNC 0x02 - TYPE 0x1B - Temperature Sensor Range +50°C to +130°C
shortcut
description
type
values
TMP
Temperature (linear)
value
255.0-0.0 ↔ 50.0-130.0 °C
RORG 0xA5 - FUNC 0x02 - TYPE 0x20 - 10 Bit Temperature Sensor Range -10°C to +41.2°C
shortcut
description
type
values
TMP
Temperature (linear)
value
1023.0-0.0 ↔ -10.0-41.2 °C
RORG 0xA5 - FUNC 0x02 - TYPE 0x30 - 10 Bit Temperature Sensor Range -40°C to +62.3°C
shortcut
description
type
values
TMP
Temperature (linear)
value
1023.0-0.0 ↔ -40.0-62.3 °C
RORG 0xA5 - FUNC 0x04 - TYPE 0x01 - Range 0°C to +40°C and 0% to 100%
shortcut
description
type
values
HUM
Rel. Humidity (linear)
value
0.0-250.0 ↔ 0.0-100.0 %
TMP
Temperature (linear)
value
0.0-250.0 ↔ 0.0-40.0 °C
TSN
Availability of the Temperature Sensor
enum
0 - not available
1 - available
RORG 0xA5 - FUNC 0x04 - TYPE 0x03 - Range -20°C to +60°C 10bit-measurement and 0% to 100%
shortcut
description
type
values
HUM
Rel. Humidity (linear)
value
0.0-255.0 ↔ 0.0-100.0 %
TMP
Temperature (linear)
value
0.0-1023.0 ↔ -20.0-60.0 °C
TTP
Telegram Type
enum
0 - Heartbeat
1 - Event triggered
RORG 0xA5 - FUNC 0x06 - TYPE 0x01 - Range 300lx to 60.000lx
shortcut
description
type
values
SVC
Supply voltage (linear)
value
0.0-255.0 ↔ 0.0-5.1 V
ILL2
Illumination 2 (linear)
value
0.0-255.0 ↔ 300.0-30000.0 lx
ILL1
Illumination 1 (linear)
value
0.0-255.0 ↔ 600.0-60000.0 lx
RS
Range select
enum
0 - Range acc. to DB_1 (ILL1)
1 - Range acc. to DB_2 (ILL2)
RORG 0xA5 - FUNC 0x06 - TYPE 0x02 - Range 0lx to 1.020lx
shortcut
description
type
values
SVC
Supply voltage (linear)
value
0.0-255.0 ↔ 0.0-5.1 V
ILL2
Illumination 2 (linear)
value
0.0-255.0 ↔ 0.0-510.0 lx
ILL1
Illumination 1 (linear)
value
0.0-255.0 ↔ 0.0-1020.0 lx
RS
Range select
enum
0 - Range acc. to DB_1 (ILL1)
1 - Range acc. to DB_2 (ILL2)
RORG 0xA5 - FUNC 0x07 - TYPE 0x01 - Occupancy with Supply voltage monitor
shortcut
description
type
values
SVC
Supply voltage (OPTIONAL)
value
0.0-250.0 ↔ 0.0-5.0 V
PIR
PIR Status
enum
0 - off
1 - on
RORG 0xA5 - FUNC 0x07 - TYPE 0x03 - Occupancy with Supply voltage monitor and 10-bit illumination measurement
shortcut
description
type
values
SVC
Supply voltage (OPTIONAL)
value
0.0-250.0 ↔ 0.0-5.0 V
ILL
Illumination (linear)
value
0.0-1000.0 ↔ 0.0-1000.0 lx
PIR
PIR Status
enum
0 - Uncertain of occupancy status
1 - Motion detected
RORG 0xA5 - FUNC 0x08 - TYPE 0x01 - Range 0lx to 510lx, 0°C to +51°C and Occupancy Button
shortcut
description
type
values
SVC
Supply voltage (linear)
value
0.0-255.0 ↔ 0.0-5.1 V
ILL
Illumination (linear)
value
0.0-255.0 ↔ 0.0-510.0 lx
TMP
Temperature (linear)
value
0.0-255.0 ↔ 0.0-51.0 °C
PIRS
PIR Status
enum
0 - PIR on
1 - PIR off
OCC
Occupancy Button
enum
0 - Button pressed
1 - Button released
RORG 0xA5 - FUNC 0x09 - TYPE 0x04 - CO2 Sensor
shortcut
description
type
values
HUM
Rel. Humidity (linear)
value
0.0-200.0 ↔ 0.0-100.0 %
Conc
Concentration (linear)
value
0.0-255.0 ↔ 0.0-2550.0 ppm
TMP
Temperature (linear)
value
0.0-255.0 ↔ 0.0-51.0 °C
RORG 0xA5 - FUNC 0x09 - TYPE 0x05 - VOC Sensor
shortcut
description
type
values
Conc
VOC Concentration
value
0.0-65535.0 ↔ 0.0-65535.0 ppb
VOC_ID
VOC Identification
enum
0 - VOCT (total)
1 - Formaldehyde
2 - Benzene
3 - Styrene
4 - Toluene
5 - Tetrachloroethylene
6 - Xylene
7 - n-Hexane
8 - n-Octane
9 - Cyclopentane
10 - Methanol
11 - Ethanol
12 - 1-Pentanol
13 - Acetone
14 - ethylene Oxide
15 - Acetaldehyde ue
16 - Acetic Acid
17 - Propionice Acid
18 - ValericAcid
19 - ButyricAcid
20 - Ammoniac
22 - Hydrogen Sulfide
23 - Dimethylsulfide
24 - 2-Butanol (butyl Alcohol)
25 - 2-Methylpropanol
26 - Diethyl ether
255 - ozone
RORG 0xA5 - FUNC 0x09 - TYPE 0x09 - Gas Sensor
shortcut
description
type
values
CO2
CO2 Measurement
value
0.0-255.0 ↔ 0.0-2000.0 ppm
RORG 0xA5 - FUNC 0x10 - TYPE 0x03 - Temperature Sensor and Set Point
shortcut
description
type
values
SP
Set Point (linear)
value
0.0-255.0 ↔ 0.0-255.0 %
TMP
Temperature (linear)
value
255.0-0.0 ↔ 0.0-40.0 °C
RORG 0xA5 - FUNC 0x10 - TYPE 0x05 - Temperature Sensor, Set Point and Occupancy Control
shortcut
description
type
values
SP
Set Point (linear)
value
0.0-255.0 ↔ 0.0-255.0 %
TMP
Temperature (linear)
value
255.0-0.0 ↔ 0.0-40.0 °C
OCC
Occupancy Button
enum
0 - Button pressed
1 - Button released
RORG 0xA5 - FUNC 0x10 - TYPE 0x06 - Temperature Sensor, Set Point and Day/Night Control
shortcut
description
type
values
SP
Set Point (linear)
value
0.0-255.0 ↔ 0.0-255.0 %
TMP
Temperature (linear)
value
255.0-0.0 ↔ 0.0-40.0 °C
SLSW
Slide switch
enum
0 - Position I / Night / Off
1 - Position O / Day / On
RORG 0xA5 - FUNC 0x10 - TYPE 0x10 - Temperature and Humidity Sensor, Set Point and Occupancy Control
shortcut
description
type
values
SP
Set Point (linear)
value
0.0-255.0 ↔ 0.0-255.0
HUM
Rel. Humidity (linear)
value
0.0-250.0 ↔ 0.0-100.0 %
TMP
Temperature (linear)
value
0.0-250.0 ↔ 0.0-40.0 °C
OCC
Occupancy Button
enum
0 - Button pressed
1 - Button released
RORG 0xA5 - FUNC 0x10 - TYPE 0x12 - Temperature and Humidity Sensor and Set Point
shortcut
description
type
values
SP
Set Point (linear)
value
0.0-255.0 ↔ 0.0-255.0
HUM
Rel. Humidity (linear)
value
0.0-250.0 ↔ 0.0-100.0 %
TMP
Temperature (linear)
value
0.0-250.0 ↔ 0.0-40.0 °C
RORG 0xA5 - FUNC 0x11 - TYPE 0x02 - Temperature Controller Output
shortcut
description
type
values
CVAR
Actual value of controller
value
0.0-255.0 ↔ 0.0-100.0 %
FAN
Actual value of fan
enum
0 - State 0 Manual
1 - State 1 Manual
2 - State 2 Manual
3 - State 3 Manual
16 - State 0 Automatic
17 - State 1 Automatic
18 - State 2 Automatic
19 - State 3 Automatic
255 - Not Available
ASP
Actual Setpoint
value
0.0-255.0 ↔ 0.0-51.2 C
ALR
Alarm
enum
0 - No alarm
1 - Alarm
CTM
Controller mode
enum
1 - Heating
2 - Cooling
3 - Off
CTS
Controller state
enum
0 - Automatic
1 - Override
ERH
Energy hold-off
enum
0 - Normal
1 - Energy hold-off / Dew point
RO
Room occupancy
enum
0 - Occupied
1 - Unoccupied
2 - StandBy
3 - Frost
RORG 0xA5 - FUNC 0x11 - TYPE 0x03 - Blind Status
shortcut
description
type
values
BSP
Blind/shutter position
value
0.0-100.0 ↔ 0.0-100.0 %
AS
Angle sign
enum
0 - Positive sign
1 - Negative sign
AN
Angle in 2 degrees steps
value
0.0-90.0 ↔ 0.0-180.0 degrees
PVF
Position value flag
enum
0 - No position value available
1 - Position value available
AVF
Angle value flag
enum
0 - No Angle value available
1 - Angle value available
ES
Error state
enum
0 - No error present
1 - End-positions are not configured
2 - Internal failure
3 - Not used
EP
End position
enum
0 - No End-position available
1 - No End-position reached
2 - Blind fully open
3 - Blind fully closed
ST
Status
enum
0 - No status available
1 - Blind is stopped
2 - Blind opens
3 - Blind closes
SM
Service mode
enum
0 - Normal mode
1 - Service mode activated
MOTP
Mode of the position
enum
0 - Normal mode
1 - Inverse ode
RORG 0xA5 - FUNC 0x13 - TYPE 0x01 - Weather Station
command: 1
shortcut
description
type
values
DWS
Dawn sensor
value
0.0-255.0 ↔ 0.0-999.0 lx
TMP
Outdoor Temp
value
0.0-255.0 ↔ -40.0-80.0 °C
WND
Wind speed
value
0.0-255.0 ↔ 0.0-70.0 m/s
D/N
Day / Night
enum
0 - day
1 - night
RAN
Rain Indication
enum
0 - no rain
1 - rain
command: 2
shortcut
description
type
values
SNW
Sun - West
value
0.0-255.0 ↔ 0.0-150.0 klx
SNS
Sun - South
value
0.0-255.0 ↔ 0.0-150.0 klx
SNE
Sun - East
value
0.0-255.0 ↔ 0.0-150.0 klx
HEM
Hemisphere
enum
0 - North
1 - South
command: 3
shortcut
description
type
values
DY
Day
value
1.0-31.0 ↔ 1.0-31.0
MTH
Month
value
1.0-12.0 ↔ 1.0-12.0
YR
Year
value
0.0-99.0 ↔ 2000.0-2099.0
SRC
Source
enum
0 - Real Time Clock
1 - GPS or equivalent
command: 4
shortcut
description
type
values
WDY
Weekday
enum
1 - Monday
2 - Tuesday
3 - Wednesday
4 - Thursday
5 - Friday
6 - Saturday
7 - Sunday
HR
Hour
value
0.0-23.0 ↔ 0.0-23.0
MIN
Minute
value
0.0-59.0 ↔ 0.0-59.0
SEC
Second
value
0.0-59.0 ↔ 0.0-59.0
TMF
Time Format
enum
0 - 24 Hours
1 - 12 Hours
A/PM
AM/PM
enum
0 - AM
1 - PM
SRC
Source
enum
0 - Real Time Clock
1 - GPS or equivalent
command: 5
shortcut
description
type
values
ELV
Elevation
value
0.0-180.0 ↔ -90.0-90.0 °
AZM
Azimut
value
0.0-359.0 ↔ 0.0-359.0 °
command: 6
shortcut
description
type
values
Latitude(MSB)
value
0.0-15.0 ↔ 0.0-15.0
LOT(MSB)
Longitude(MSB)
value
0.0-15.0 ↔ 0.0-15.0
LAT(LSB)
Latitude(LSB)
value
0.0-255.0 ↔ 0.0-255.0
LOT(LSB)
Longitude(LSB)
value
0.0-255.0 ↔ 0.0-255.0
RORG 0xA5 - FUNC 0x14 - TYPE 0x01 - Single Input Contact (Window/Door), Supply voltage monitor
shortcut
description
type
values
SVC
Supply voltage / super cap. (linear); 251 - 255 reserved for error code
value
0.0-250.0 ↔ 0.0-5.0 V
CT
Contact
enum
1 - open
0 - closed
RORG 0xA5 - FUNC 0x20 - TYPE 0x01 - Battery Powered Actuator (BI-DIR)
direction: 1
shortcut
description
type
values
CV
Current Value
value
0.0-100.0 ↔ 0.0-100.0 %
SO
Service On
enum
0 - off
1 - on
ENIE
Energy input enabled
enum
0 - false
1 - true
ES
Energy storage sufficiently charged
enum
0 - false
1 - true
BCAP
Battery capacity; change battery next days
enum
0 - false
1 - true
CCO
Contact, cover open
enum
0 - false
1 - true
FTS
Failure Temperature sensor, out of range
enum
0 - false
1 - true
DWO
Detection, window open
enum
0 - false
1 - true
ACO
Actuator obstructed
enum
0 - false
1 - true
TMP
Temperature (linear)
value
0.0-255.0 ↔ 0.0-40.0 °C
direction: 2
shortcut
description
type
values
SP
Valve Position or Temperature Setpoint
value
0.0-100.0 ↔ 0.0-100.0 %
TMP
Temperature from RCU
value
0.0-255.0 ↔ 0.0-40.0 °C
RIN
Run init sequence
enum
0 - false
1 - true
LFS
Lift set
enum
0 - false
1 - true
VO
Valve open / maintenance
enum
0 - false
1 - true
VC
Valve closed
enum
0 - false
1 - true
SB
Summer bit, Reduction of energy consumption
enum
0 - false
1 - true
SPS
Set point selection
enum
0 - Valve position
1 - Temperature set point
SPN
Set point inverse
enum
0 - false
1 - true
RCU
Select function
enum
0 - RCU
1 - service on
RORG 0xA5 - FUNC 0x12 - TYPE 0x01 - Electricity
shortcut
description
type
values
MR
current value in W or cumulative value in kWh
value
0.0-16777215.0 ↔ 0.0-16777215.0
TI
Tariff info
value
0.0-15.0 ↔ 0.0-15.0
DT
Current value or cumulative value
enum
0 - kWh
1 - W
DIV
Divisor for value
enum
0 - x/1
1 - x/10
2 - x/100
3 - x/1000
RORG 0xA5 - FUNC 0x30 - TYPE 0x03 - Digital Inputs, Wake and Temperature
shortcut
description
type
values
TMP
Temperature (linear)
value
255.0-0.0 ↔ 0.0-40.0 °C
WA0
Value of wake signal
enum
0 - Low
1 - High
DI3
Digital Input 3
enum
0 - Low
1 - High
DI2
Digital Input 2
enum
0 - Low
1 - High
DI1
Digital Input 1
enum
0 - Low
1 - High
DI0
Digital Input 0
enum
0 - Low
1 - High
RORG 0xA5 - FUNC 0x38 - TYPE 0x08 - Gateway
command: 1
shortcut
description
type
values
COM
Command ID
enum
0-13 - Command ID {value}
TIM
Time in 1/10 seconds. 0 = no time specifed
value
1.0-65535.0 ↔ 0.1-6553.5 s
LCK
Lock for duration time if time >0, unlimited time of no time specified. Locking may be cleared with "unlock". During lock phase no other commands will be accepted or executed
enum
0 - Unlock
1 - Lock
DEL
Delay or duration (if Time > 0); 0 = Duration (Execute switching command immediately and switch back after duration) 1 = Delay (Execute switching command after delay)
enum
0 - Duration
1 - Delay
SW
Switching command ON/OFF
enum
0 - Off
1 - On
command: 2
shortcut
description
type
values
COM
Command ID
enum
0-13 - Command ID {value}
EDIM
Dimming value (absolute [0...255] or relative [0...100])
value
0.0-255.0 ↔ 0.0-255.0 %
RMP
Ramping time in seconds, 0 = no ramping, 1...255 = seconds to 100%
value
0.0-255.0 ↔ 0.0-255.0 s
EDIMR
Dimming Range
enum
0 - Absolute value
1 - Relative value
STR
Store final value
enum
0 - No
1 - Yes
SW
Switching command
enum
0 - Off
1 - On
VLD Telegram (0xD2)
RORG 0xD2 - FUNC 0x01 - TYPE 0x01 - Electronic switch with Local Control
command: 4
shortcut
description
type
values
PF
Power Failure
enum
0 - Power Failure Detection disabled/not supported
1 - Power Failure Detection enabled
PFD
Power Failure Detection
enum
0 - Power Failure Detection not detected/not supported/disabled
1 - Power Failure Detection Detected
CMD
Command indentifier
enum
0-13 - Command ID {value}
OC
Over current switch off
enum
0 - Over current switch off: ready / not supported
1 - Over current switch off: executed
EL
Error level
enum
0 - Error level 0: hardware OK
1 - Error level 1: hardware warning
2 - Error level 2: hardware failure
3 - Error level not supported
IO
I/O channel
enum
0-29 - Output channel {value} (to load)
30 - Not applicable, do not use
31 - Input channel (from mains supply)
LC
Local control
enum
0 - Local control disabled / not supported
1 - Local control enabled
OV
Output value
enum
0 - Output value 0% or OFF
1-100 - Output value {value}% or ON
101-126 - Not used
127 - output value not valid / not set
command: 1
shortcut
description
type
values
CMD
Command indentifier
enum
0-13 - Command ID {value}
DV
Dim value
enum
0 - Switch to new output value
1 - Dim to new output level - dim timer 1
2 - Dim to new output level - dim timer 2
3 - Dim to new output level - dim timer 3
4 - Stop dimming
IO
I/O channel
enum
0-29 - Output channel {value} (to load)
30 - All output channels supported by the device
31 - Input channel (from mains supply)
OV
Output value
enum
0 - Output value 0% or OFF
1-100 - Output value {value}% or ON
101-126 - Not used
127 - output value not valid / not set
RORG 0xD2 - FUNC 0x01 - TYPE 0x0F - Electronic switch with Local Control
command: 4
shortcut
description
type
values
PF
Power Failure
enum
0 - Power Failure Detection disabled/not supported
1 - Power Failure Detection enabled
PFD
Power Failure Detection
enum
0 - Power Failure Detection not detected/not supported/disabled
1 - Power Failure Detection Detected
CMD
Command indentifier
enum
0-13 - Command ID {value}
OC
Over current switch off
enum
0 - Over current switch off: ready / not supported
1 - Over current switch off: executed
EL
Error level
enum
0 - Error level 0: hardware OK
1 - Error level 1: hardware warning
2 - Error level 2: hardware failure
3 - Error level not supported
IO
I/O channel
enum
0-29 - Output channel {value} (to load)
30 - Not applicable, do not use
31 - Input channel (from mains supply)
LC
Local control
enum
0 - Local control disabled / not supported
1 - Local control enabled
OV
Output value
enum
0 - Output value 0% or OFF
1-100 - Output value {value}% or ON
101-126 - Not used
127 - output value not valid / not set
command: 1
shortcut
description
type
values
CMD
Command indentifier
enum
0-13 - Command ID {value}
DV
Dim value
enum
0 - Switch to new output value
1 - Dim to new output level - dim timer 1
2 - Dim to new output level - dim timer 2
3 - Dim to new output level - dim timer 3
4 - Stop dimming
IO
I/O channel
enum
0-29 - Output channel {value} (to load)
30 - All output channels supported by the device
31 - Input channel (from mains supply)
OV
Output value
enum
0 - Output value 0% or OFF
1-100 - Output value {value}% or ON
101-126 - Not used
127 - output value not valid / not set
RORG 0xD2 - FUNC 0x05 - TYPE 0x00 - Type 0x00
command: 1
shortcut
description
type
values
POS
Vertical position
enum
0-100 - Output position {value}%
127 - Do not change
ANG
Rotation angle
enum
0-100 - Output angle {value}%
127 - Do not change
REPO
Repositioning
enum
0 - Go directly to POS/ANG
1 - Go up (0%), then to POS/ANG
2 - Go down (100%), then to POS/ANG
3 - Reserved
LOCK
Locking modes
enum
0 - Do not change
1 - Set blockage mode
2 - Set alarm mode
3 - Reserved
4 - Reserved
5 - Reserved
6 - Reserved
7 - Deblockage
CHN
Channel
enum
0 - Channel 1
CMD
Command Id
enum
0-5 - Command ID {value}
command: 2
shortcut
description
type
values
CHN
Channel
enum
0 - Channel 1
CMD
Command Id
enum
0-5 - Command ID {value}
command: 3
shortcut
description
type
values
CHN
Channel
enum
0 - Channel 1
CMD
Command Id
enum
0-5 - Command ID {value}
command: 4
shortcut
description
type
values
POS
Vertical position
enum
0-100 - Output position {value}%
127 - Do not change
ANG
Rotation angle
enum
0-100 - Output angle {value}%
127 - Do not change
REPO
Repositioning
enum
0 - Go directly to POS/ANG
1 - Go up (0%), then to POS/ANG
2 - Go down (100%), then to POS/ANG
3 - Reserved
LOCK
Locking modes
enum
0 - Do not change
1 - Set blockage mode
2 - Set alarm mode
3 - Reserved
4 - Reserved
5 - Reserved
6 - Reserved
7 - Deblockage
CHN
Channel
enum
0 - Channel 1
CMD
Command Id
enum
0-5 - Command ID {value}
RORG 0xD2 - FUNC 0x14 - TYPE 0x41 - Indoor -Temperature, Humidity XYZ Acceleration, Illumination Sensor
shortcut
description
type
values
TMP
Temperature 10
value
0.0-1000.0 ↔ -40.0-60.0 °C
HUM
Rel. Humidity linear)
value
0.0-200.0 ↔ 0.0-100.0 %
ILL
Illumination linear)
value
0.0-100000.0 ↔ 0.0-100000.0 lx
ACC
Acceleration Status
enum
0 - Periodic Update
1 - Threshold 1 exceeded
2 - Threshold 2 exceeded
ACX
Absolute Acceleration on X axis
value
0.0-1000.0 ↔ -2.5-2.5 g
ACY
Absolute Acceleration on Y axis
value
0.0-1000.0 ↔ -2.5-2.5 g
ACZ
Absolute Acceleration on Z axis
value
0.0-1000.0 ↔ -2.5-2.5 g
CO
Contact
enum
0 - Open
1 - Closed
Download files
Download the file for your platform. If you're not sure which to choose, learn more about installing packages .
Source Distribution
Built Distribution
File details
Details for the file enocean4ha-0.70.0.tar.gz.
File metadata
Download URL:
enocean4ha-0.70.0.tar.gz
Upload date:
Sep 2, 2024
Size: 53.2 kB
Tags: Source
Uploaded using Trusted Publishing? Yes
Uploaded via: twine/5.1.1 CPython/3.12.5
File hashes
Hashes for enocean4ha-0.70.0.tar.gz
Algorithm
Hash digest
SHA256
d345bb1c015071a7ce39ab81c6c8af0963516e24d8c689718701c74dbd4add36
Copy
MD5
bdbbc0ae7afc393c23e6078c694f1839
Copy
BLAKE2b-256
5fd69c1aaf6c8cc2b38c8ec8a21ed8ff1073796ec1a279118ff045f0654719f8
Copy
See more details on using hashes here.
File details
Details for the file enocean4ha-0.70.0-py3-none-any.whl.
File metadata
Download URL:
enocean4ha-0.70.0-py3-none-any.whl
Upload date:
Sep 2, 2024
Size: 34.1 kB
Tags: Python 3
Uploaded using Trusted Publishing? Yes
Uploaded via: twine/5.1.1 CPython/3.12.5
File hashes
Hashes for enocean4ha-0.70.0-py3-none-any.whl
Algorithm
Hash digest
SHA256
3b084d6889588425cf4a71fac369b4d78dc267149e370ecb8ad08bd16076c25a
Copy
MD5
d74bc67f601147d63747cc0cbd4e89e1
Copy
BLAKE2b-256
8788243a285fe9a7a7625e20664c4f5fee32008865aece2f9e9e6ceb9a4b8f48
Copy
See more details on using hashes here.
