ErisPulse WebhookAdapter

Universal HTTP bridge adapter — connect any system to ErisPulse, low-code.

A bidirectional bridge adapter for the ErisPulse framework. It ingests messages from any external system via HTTP and converts them into OneBot12 events, while forwarding messages emitted by ErisPulse modules to any target system — one account equals one inbound path plus one outbound URL.

English | 简体中文

English

ErisPulse's Webhook universal bridge adapter (a low-code universal bridge). It is a bidirectional bridge adapter: it ingests messages from any external system into ErisPulse via HTTP, while forwarding messages emitted by ErisPulse modules to any target system via HTTP.

Adapter Positioning

Each "account" is an independent webhook bridge configuration:

One account = one inbound path + one outbound URL + one authentication secret.

Installation

epsdk install

# Select `Adapter` to install the `Webhook` adapter

Configuration

Configuration is located in the [WebhookAdapter] section of config.toml, or via the Dashboard's adapter configuration:

[WebhookAdapter.accounts.default]
bot_id = "webhook_bot"
callback_path = "/webhook/default"
outgoing_url = "https://example.com/api/receive"   # Module messages will be POSTed here
secret = "my-secret-key"                            # Authentication secret (empty = no verification)
detail_type = "private"                             # Default session type
enabled = true

# Multiple bridge accounts can be configured
[WebhookAdapter.accounts.discord_bridge]
bot_id = "discord_bot_123"
callback_path = "/webhook/discord"
outgoing_url = "https://my-discord-relay.example.com/send"
secret = "another-secret"
detail_type = "group"
enabled = true

Field Description

Inbound Protocol (External → ErisPulse)

HTTP Request

External systems POST to {callback_path}/{account} with a JSON body:

{
  "user_id": "xxx",
  "user_nickname": "username",
  "group_id": "optional, group/channel ID",
  "detail_type": "private or group",
  "message": [{"type": "text", "data": {"text": "content"}}],
  "raw": {}
}

• When detail_type is not provided, the account's configured default is used
• group_id is only provided for group sessions
• message is an array of standard OneBot12 message segments
• raw is optional and stored as-is in webhook_raw.raw

Authentication

If the account has a secret configured, inbound requests must carry the secret (one of the following):

• Header: X-Webhook-Secret: {secret}
• Query: ?secret={secret}

No verification is performed when secret is empty.

Health Check (GET)

On receiving a GET request, returns {"status":"ok","account":"account_name"}, which can be used for health checks.

Inbound Example

curl -X POST http://localhost:8000/webhook/default \
  -H "Content-Type: application/json" \
  -H "X-Webhook-Secret: my-secret-key" \
  -d '{
    "user_id": "u123",
    "user_nickname": "test_user",
    "detail_type": "private",
    "message": [{"type": "text", "data": {"text": "hello"}}]
  }'

Response:

{"status": "ok"}

Converted OneBot12 Event

{
  "id": "auto-generated",
  "time": 1700000000,
  "type": "message",
  "detail_type": "private",
  "platform": "webhook",
  "self": {"platform": "webhook", "user_id": "webhook_bot"},
  "user_id": "u123",
  "user_nickname": "test_user",
  "message": [{"type": "text", "data": {"text": "hello"}}],
  "webhook_raw": {},
  "webhook_account": "default",
  "webhook_raw_type": "message"
}

Outbound Protocol (ErisPulse → External)

When a module calls Send, the adapter POSTs the message to the account's outgoing_url:

{
  "target_type": "private|group|user",
  "target_id": "xxx",
  "account": "account_name",
  "message": [{"type": "text", "data": {"text": "content"}}],
  "timestamp": 1234567890
}

Request header (if secret is configured):

X-Webhook-Secret: {secret}

The adapter normalizes the response returned by the outbound target into a standard response format: it extracts the message_id field from the response JSON.

Send Example

from ErisPulse import sdk

# Send text (using the default account)
await sdk.adapter.webhook.Send.To("user", "target_user_id").Text("hello")

# Send via a specific account
await sdk.adapter.webhook.Send.To("group", "group_123").Using("discord_bridge").Text("group message")

# Raw JSON passthrough
await sdk.adapter.webhook.Send.To("user", "u1").Json({"custom": "data"})

# OneBot12 raw message segments
await sdk.adapter.webhook.Send.To("user", "u1").Raw_ob12([
    {"type": "text", "data": {"text": "hello"}}
])

Use Cases

Scenario 1: Integrating Your Own System

Your business system pushes user messages to ErisPulse via webhook for processing, then receives them back:

1. Configure an account with callback_path pointing to your inbound path, and outgoing_url pointing to your receiving API
2. The business system POSTs user messages to callback_path
3. After ErisPulse modules process them, reply messages are POSTed to outgoing_url

Scenario 2: Bridging Non-Natively Supported Platforms

Through an intermediate relay script, connect other platforms (such as self-built IM or enterprise internal systems) to ErisPulse without developing a full adapter.

Scenario 3: Webhook Relay

Act as a message relay: aggregate multiple webhook sources into ErisPulse for unified processing, then dispatch to multiple targets.

Documentation

• Platform Features — Inbound/outbound protocol details and field mappings

License

MIT

中文

ErisPulse 的 Webhook 通用桥接适配器（低代码万能桥）。它是一个双向桥接适配器：把任意外部系统的消息通过 HTTP 接入 ErisPulse，同时把 ErisPulse 模块发出的消息通过 HTTP 转发给任意目标系统。

适配器定位

每个「账户」即一个独立的 webhook 桥接配置：

一个账户 = 一个入站路径 + 一个出站 URL + 一个鉴权密钥。

安装

epsdk install

# 选择 `适配器` 安装 `Webhook` 适配器

配置

配置位于 config.toml 的 [WebhookAdapter] 段，或通过Dashboard的适配器配置进行配置：

[WebhookAdapter.accounts.default]
bot_id = "webhook_bot"
callback_path = "/webhook/default"
outgoing_url = "https://example.com/api/receive"   # 模块发消息会 POST 到这里
secret = "my-secret-key"                            # 鉴权密钥（留空则不校验）
detail_type = "private"                             # 默认会话类型
enabled = true

# 可以配置多个桥接账户
[WebhookAdapter.accounts.discord_bridge]
bot_id = "discord_bot_123"
callback_path = "/webhook/discord"
outgoing_url = "https://my-discord-relay.example.com/send"
secret = "another-secret"
detail_type = "group"
enabled = true

字段说明

入站协议（外部 → ErisPulse）

HTTP 请求

外部系统 POST 到 {callback_path}/{account}，body 为 JSON：

{
  "user_id": "xxx",
  "user_nickname": "用户名",
  "group_id": "可选，群组/频道ID",
  "detail_type": "private 或 group",
  "message": [{"type": "text", "data": {"text": "内容"}}],
  "raw": {}
}

• detail_type 未提供时使用账户配置的默认值
• group_id 仅在群组会话时提供
• message 为 OneBot12 标准消息段数组
• raw 可选，原样存入 webhook_raw.raw

鉴权

如果账户配置了 secret，入站请求需携带密钥（二选一）：

• Header：X-Webhook-Secret: {secret}
• Query：?secret={secret}

secret 留空时不校验。

健康检查（GET）

收到 GET 请求时返回 {"status":"ok","account":"账户名"}，可用于健康检查。

入站示例

curl -X POST http://localhost:8000/webhook/default \
  -H "Content-Type: application/json" \
  -H "X-Webhook-Secret: my-secret-key" \
  -d '{
    "user_id": "u123",
    "user_nickname": "测试用户",
    "detail_type": "private",
    "message": [{"type": "text", "data": {"text": "你好"}}]
  }'

响应：

{"status": "ok"}

转换后的 OneBot12 事件

{
  "id": "自动生成",
  "time": 1700000000,
  "type": "message",
  "detail_type": "private",
  "platform": "webhook",
  "self": {"platform": "webhook", "user_id": "webhook_bot"},
  "user_id": "u123",
  "user_nickname": "测试用户",
  "message": [{"type": "text", "data": {"text": "你好"}}],
  "webhook_raw": {},
  "webhook_account": "default",
  "webhook_raw_type": "message"
}

出站协议（ErisPulse → 外部）

模块调用 Send 时，适配器把消息 POST 到账户的 outgoing_url：

{
  "target_type": "private|group|user",
  "target_id": "xxx",
  "account": "账户名",
  "message": [{"type": "text", "data": {"text": "内容"}}],
  "timestamp": 1234567890
}

请求头（若配置了 secret）：

X-Webhook-Secret: {secret}

适配器会把出站目标返回的响应标准化为标准响应格式：从响应 JSON 中提取 message_id 字段。

发送示例

from ErisPulse import sdk

# 发送文本（使用默认账户）
await sdk.adapter.webhook.Send.To("user", "target_user_id").Text("你好")

# 指定账户发送
await sdk.adapter.webhook.Send.To("group", "group_123").Using("discord_bridge").Text("群消息")

# 原始 JSON 透传
await sdk.adapter.webhook.Send.To("user", "u1").Json({"custom": "data"})

# OneBot12 原始消息段
await sdk.adapter.webhook.Send.To("user", "u1").Raw_ob12([
    {"type": "text", "data": {"text": "hello"}}
])

使用场景

场景一：接入自有系统

你的业务系统通过 webhook 把用户消息推给 ErisPulse 处理，处理后再回传：

1. 配置一个账户，callback_path 指向你的入站路径，outgoing_url 指向你的接收 API
2. 业务系统把用户消息 POST 到 callback_path
3. ErisPulse 模块处理后，回复消息会 POST 到 outgoing_url

场景二：桥接非原生支持的平台

通过中间转发脚本，把其他平台（如自建 IM、企业内部系统）接入 ErisPulse，无需开发完整适配器。

场景三：Webhook 中继

作为消息中继，把多个 webhook 源汇聚到 ErisPulse 统一处理，再分发给多个目标。

文档

• 平台特性说明 — 入站/出站协议详解与字段映射

许可证

MIT