flake8-black 0.3.6

flake8 plugin to call black as a code style validator

Introduction

This is an MIT licensed flake8 plugin for validating Python code style with the command line code formatting tool black. It is available to install from the Python Package Index (PyPI).

Black, “The Uncompromising Code Formatter”, is normally run to edit your Python code in place to match their coding style, a strict subset of the PEP 8 style guide.

The point of this plugin is to be able to run black --check ... from within the flake8 plugin ecosystem. You might use this via a git pre-commit hook, or as part of your continuous integration testing.

If you are using pre-commit configure it to call black and/or flake8 directly - you do not need flake8-black at all.

Flake8 Validation codes

Early versions of flake8 assumed a single character prefix for the validation codes, which became problematic with collisions in the plugin ecosystem. Since v3.0, flake8 has supported longer prefixes, therefore this plugin uses BLK as its prefix.

Code	Description (and notes)
BLK100	Black would make changes.
BLK9##	Internal error (various, listed below):
BLK900	Failed to load file: …
BLK901	Invalid input.
BLK997	Invalid TOML file: …
BLK998	Could not access flake8 line length setting (no longer used).
BLK999	Unexpected exception.

Note that if your Python code has a syntax error, black --check ... would report this as an error. Likewise flake8 ... will by default report the syntax error, but importantly it does not seem to then call the plugins, so you will not get an additional BLK error.

Installation

Python 3.7 or later is required, but black can be used on Python code written for older versions of Python.

You can install flake8-black using pip, which should install flake8 and black as well if not already present:

$ pip install flake8-black

Alternatively, if you are using the Anaconda packaging system, the following command will install the plugin with its dependencies:

$ conda install -c conda-forge flake8-black

The new validator should be automatically included when using flake8 which may now report additional validation codes starting with BLK (as defined above). For example:

$ flake8 example.py

You can request only the BLK codes be shown using:

$ flake8 --select BLK example.py

Python package management

We covered using pip or conda by hand above. If you are using a PyPI based Python dependency system like pipenv or poetry, you may run into complications because at the time of writing all the black releases to PyPI have been tagged as pre-releases (beta code). PEP440 Handling of pre-releases could be more explicit here.

For pipenv, flake8-black v0.2.0 onwards should just work.

For poetry, include this in your pyproject.toml configuration file:

[tool.poetry.dev-dependencies]
...
black = { version = "*", allow-prereleases = true }
...

In either case, for large projects you should consider pinning the exact version of black you want to use as their updates do sometimes introduce changes which would show up as new BLK100 violations via flake8.

Configuration

We assume you are familiar with flake8 configuration and black configuration.

We recommend using the following settings in your flake8 configuration, for example in your .flake8, setup.cfg, or tox.ini file:

[flake8]
# Recommend matching the black line length (default 88),
# rather than using the flake8 default of 79:
max-line-length = 88
extend-ignore =
    # See https://github.com/PyCQA/pycodestyle/issues/373
    E203,

Note currently pycodestyle gives false positives on the spaces black uses for slices, which flake8 reports as E203: whitespace before ':'. Until pyflakes issue 373 is fixed, and flake8 is updated, we suggest disabling this style check.

Separately pyproject.toml is used for black configuration - if this file is found, the plugin will look at the following black settings:

• target_version

• skip_string_normalization

• line_length

You can specify a particular path for the pyproject.toml file (e.g. global development settings) using --black-config FILENAME at the command line, or using black-config = FILENAME in your flake8 configuration file.

Ignoring validation codes

Using the flake8 no-quality-assurance pragma comment is not recommended (e.g. adding # noqa: BLK100 to the first line black would change). Instead use the black pragma comments # fmt: off at the start, and # fmt: on at the end, of any region of your code which should not be changed. Or, add # fmt: skip to single lines. Or, exclude the entire file by name (see below).

Ignoring files

The plugin does NOT currently consider the black settings include and exclude, so if you have certain Python files which you do not use with black and have told it to ignore, you will also need to tell flake8 to ignore them (e.g. using exclude or per-file-ignores).

Version History

Version	Release date	Changes
v0.3.6	2022-12-13	Use standard library tomllib on Python 3.11 onwards, contribution from Ganden Schaffner.
v0.3.5	2022-11-21	Fix regression clashing with flake8-rst-docstrings.
v0.3.4	2022-11-17	Replaces setup.py with pyproject.toml for build.
v0.3.3	2022-05-16	Cope with line-length as string in pyproject.toml config.
v0.3.2	2022-02-25	Use tomli library to match black, contribution from Brian Helba. Adopted GitHub Actions to replace TravisCI testing. Python 3.7 or later required.
v0.3.0	2022-02-25	Requires black v22.1.0 (first non-beta release) or later. Support options “preview”, “skip-magic-trailing-comma” in the black TOML file, contribution from Ferdy.
v0.2.4	2022-01-30	Support black v22.1.0 which changed a function call, contribution from Raffaele Salmaso.
v0.2.3	2021-07-16	Made toml dependency explicit in setup.py.
v0.2.2	2021-07-16	Declared toml dependency (for black 21.7b0).
v0.2.1	2020-07-25	Detect *.pyi files via extension.
v0.2.0	2020-05-20	Minimum requirement on black 19.3b0 or later is now implicit. This is a workaround for pipenv issue 3928. Upgrade black if running flake8 gives an error like this: Flake8 failed to load plugin "BLK" due to __call__() got an unexpected keyword argument 'target_versions'.
v0.1.2	2020-05-18	Removed test broken by flake8 v3.8 change to resolve configuration files relative to current directory.
v0.1.1	2019-08-26	Option to use a (global) black configuration file, contribution from Tomasz Grining. New BLK997 if can’t parse pyproject.toml file. Logs configuration files, use -v or --verbose. Fixed flake8 “builtins” parameter warning. Now requires black 19.3b0 or later.
v0.1.0	2019-06-03	Uses main black settings from pyproject.toml, contribution from Alex. WARNING: Now ignores flake8 max-line-length setting.
v0.0.4	2019-03-15	Supports black 19.3b0 which changed a function call.
v0.0.3	2019-02-21	Bug fix when W292 no newline at end of file applies, contribution from Sapphire Becker.
v0.0.2	2019-02-15	Document syntax error behaviour (no BLK error reported).
v0.0.1	2019-01-10	Initial public release. Passes flake8 max-line-length setting to black.

Developers

This plugin is on GitHub at https://github.com/peterjc/flake8-black

Developers may install the plugin from the git repository with optional build dependencies:

$ pip install -e .[develop]

To make a new release once tested locally and online:

$ git tag vX.Y.Z
$ python -m build
$ git push origin master --tags
$ twine upload dist/flake8?black-X.Y.Z*

The PyPI upload should trigger an automated pull request updating the flake8-black conda-forge recipe.