flowcast 0.2.0

A framework for dynamically allowing users to easily string together operations over gridded netcdf data, and derived new insights from the data.

Flowcast

A framework for dynamically allowing users to easily string together operations over gridded netcdf data, and derived new insights from the data.

Overview

To create a dynamic insight, the user will:

1. create an empty pipeline
2. add steps to the pipeline
   • while steps are added, several compile-time checks are performed to validate the pipeline
3. execute the pipeline

Compilation vs Execution

Pipelines separate out compilation/building the pipeline from execution because the operations on datasets may be expensive, and ideally we would like to know before we run the pipeline if there is a problem that would cause it to crash.

Pipeline steps

A step in a pipeline is usually some operation on a dataset. Most steps will produce a new result dataset, which the user must name, and can be used in subsequent steps.

Static Single Assignment

No steps should modify data in place--all data are treated as constant, and names may not be reused. This is called Static Single Assignment (SSA), and is a common technique in compilers for reducing complexity. SSA is used here mainly to simplify regridding logic:

• Regridding can target matching existing data's resolution. If that existing data were to later change resolution, it would be more difficult to bookkeep and make sure any dependent data gets updated as well

In practice, what this means is that instead of a pipeline looking like this:

x = load_data(...)
y = load_data(...)
x = x > 100
y = y * x
y = y.sum(dims=['lat', 'lon'])
y = y.reverse_geocode(['China', 'India', 'United States', 'Canada', 'Mexico'])
y.save('result.nc')

new names are needed for each step:

x1 = load_data(...)
y1 = load_data(...)
x2 = x1 > 100
y2 = y * x2
y3 = y2.sum(dims=['lat', 'lon'])
y4 = y3.reverse_geocode(['China', 'India', 'United States', 'Canada', 'Mexico'])
y4.save('result.nc')

Pipeline operations

steps include things like:

• loading data
• geo/temporal regridding
• unary operations on a single dataset (threshold, etc.)
• binary operations between two datasets (add, multiply, divide, etc.)
• aggregating over a dataset's dimensions
• reverse geocoding a dataset to countries
• save data to a file

Compile-time checks

The main compile-time checks performed on a pipeline are:

• ensuring variable names are not reused (enforcing SSA)
• ensuring geo/temporal regridding targets are set before operations that will require regridding

Example

An example pipeline for the extreme heat scenario:

# extreme heat scenario: how many people will be exposed to extreme heat events (e.g., heatwaves) in the future?
pipe = Pipeline()
    
# set geo/temporal resolution targets for operations in the pipeline
pipe.set_geo_resolution('pop')
pipe.set_time_resolution(Frequency.yearly)

# load the data
pipe.load('pop', OtherData.population(scenario=Scenario.ssp585))
pipe.load('tasmax', CMIP6Data.tasmax(model=Model.CAS_ESM2_0, scenario=Scenario.ssp585, realization=Realization.r1i1p1f1))

# operations on the data to perform the scenario
pipe.threshold('heat', 'tasmax', Threshold(308.15, ThresholdType.greater_than))
pipe.multiply('exposure0', 'heat', 'pop')
pipe.reverse_geocode('exposure1', 'exposure0', ['China', 'India', 'United States', 'Canada', 'Mexico'])
pipe.sum_reduce('exposure2', 'exposure1', dims=['lat', 'lon'])
pipe.save('exposure2', 'exposure.nc')

# run the pipeline
pipe.execute()

which basically gets converted to the following operations:

pop = load_population_data()                #from some external data source
tasmax = load_tasmax_data(Model.CAS_ESM2_0) #from some external data source

# automatically regrid tasmax to match pop's geo resolution and to yearly frequency
__tmp_0__ = geo_regrid(tasmax, match=pop)
__tmp_1__ = time_regrid(__tmp_0__, yearly)

# automatically regrid pop to yearly frequency
__tmp_2__ = regrid(pop, yearly)

# actual steps in the pipeline
heat = __tmp_1__ > 35°C
exposure0 = heat * __tmp_2__
exposure1 = reverse_geocode(exposure0, ['China', 'India', 'United States', 'Canada', 'Mexico'])
exposure2 = exposure1.sum(dims=['lat', 'lon'])
exposure2.to_netcdf('exposure.nc')

user can build a pipeline of steps by sequentially calling operations (e.g. load data, threshold, multiply, save data, etc.), and specifying input variable names and names for the results as the user builds the pipeline, the Pipeline class runs several "compile-time" checks, such as ensuring variable names are valid, ensuring data will be regridded if necessary, etc. Once the pipeline is built, it can be executed, which performs all of the accumulated steps in sequence separate compile/execute phases are so that you don't have to wait for expensive data operations to know if something's invalid

Compilation

The Pipeline class provides an @compile decorator which is used to annotate methods that will be used as pipeline operations. The decorator will perform several compile-time checks, and then saves the method in a list of pipeline steps to be executed later.

Dynamic Regridding

Data frequently is not at a common geo/temporal resolution and requires regridding to be used together with other data. During pipeline execution, the current data's resolution/frequency is stored with the data as part of the Variable class. When an operation is to be performed with one or more variables, their current frequency/resolution is compared to the current target frequency/resolution of the pipeline, and if they do not match, a regridding operation is called. The result is given a temporary identifier, which is used in the operation in place of the original un-regridded data.

Pipeline Operation Signatures

Here are some example signatures for pipeline operations:

def set_geo_resolution(self, target:Resolution|str): ...
def set_time_resolution(self, target:Frequency|str): ...
def load(self, name:ResultID, /, loader:Callable[[], Variable]): ...
def threshold(self, y:ResultID, x:OperandID, /, threshold:Threshold): ...
def multiply(self, y:ResultID, x1:OperandID, x2:OperandID, /): ...
def reverse_geocode(self, y:ResultID, x:OperandID, /, countries:list[str]): ...
def sum(self, y:ResultID, x:OperandID, /, dims:list[str]): ...
def save(self, x:OperandID, /, path:str): ...

Some things to note:

• All of these are annotated with @compile which means when they are called, they are added to the pipeline's list of steps, and their execution is deferred to when pipeline.execute() is called
• set_geo_resolution and set_time_resolution don't operate on any data, and instead manage global pipeline settings. They just look like normal methods with no special considerations (other than being annotated with @compile).
• load, threshold, multiply, reverse_geocode, and sum all produce a result value, which is named by the user. Resulting values should use the ResultID type annotation, and be position-only values (positional only is achieved with the / in the signature). By convention, the result value is the first argument in the method signature, and also I've been calling it y.
• threshold, multiply, reverse_geocode, sum, and save all take input arguments, which must refer to existing data in the pipeline namespace. Input values should use the OperandID type annotation, and be position-only values (positional only is achieved with the / in the signature). By convention, the input values follow the result value (if any), and I've been calling them x, x1, x2, etc.
• any relevant non-identifier arguments can appear wherever make sense. Typically I put them after the / making them positional or keyword arguments.

Misc Notes:

• to call an @compile decorated function immediately (rather than add it to the pipeline, which is the default behavior), methods have a .unwrapped property, which returns the original unwrapped version of the function. This is useful if you want to use one of the methods inside a pipeline method at runtime, e.g. as is done in the auto_regrid() method.
• geo and temporal regridding has two types, fixed and matched which refers to which type of target is used for the regridding:
  • fixed targets a static resolution/frequency, e.g. 1°x1°, 1 month
  • matched targets (by name) the resolution/frequency of another dataset in the pipeline