geniushub-client 0.6.16

A aiohttp-based client for Genius Hub systems

geniushub-client

This is a Python library to provide access to a Genius Hub by abstracting its RESTful API. It uses aiohttp and is therefore async-friendly.

This library can use either the offical v1 API with a hub token, or the latest v3 API (using your own username and password). In either case, the library will return v1-compatible results wherever possible (this is not a trivial task).

If you use the v3 API, you can interrogate the hub directly, rather than via Heat Genius' own servers. Note that the v3 API is undocumented, and so this functionality may break at any time. In fact, the v3 to v1 conversion if best efforts and may even be broken as is for some edge cases - it was tested with HW, on/off (i.e. smart plugs), and radiators only.

It is a WIP, and is missing some functionality (e.g. schedules). In addition, there are some other limitations (see below).

It is based upon work by @GeoffAtHome - thanks!

Current limitations

Current limitations & to-dos include:

• ghclient.py is not complete
• schedules are read-only
• when using the v3 API, zones sometimes have the wrong value for occupied

The library will return v1 API responses wherever possible, however:

1. the only code available to reverse-engineer is from the web app, but
2. the Web app does not correlate completely with the v1 API (e.g. issue messages, occupied state)

Thus, always check your output against the corresponding v1 API response rather than the web app.

Installation

Either clone this repository and run python setup.py install, or install from pip using pip install geniushub-client.

Using the Library

See ghclient.py for example code. You can also use ghclient.py for ad-hoc queries:

python ghclient.py -?

There are two distinct options for accessing a Genius Hub:

Option 1: hub token only:

• requires a hub token obtained from https://my.geniushub.co.uk/tokens
• uses the v1 API - which is well-documented
• interrogates Heat Genius' own servers (so is slower)

Option 2: hub hostname/address with user credentials:

• requires your username & password, as used with https://www.geniushub.co.uk/app
• uses the v3 API - results are WIP and may not be what you expect
• interrogates the hub directly (so is faster), via port :1223

HUB_TOKEN="eyJhbGciOiJIUzI1NiIsInR5cCI6IkpXVCIsInZlc..."
HUB_ADDRESS="my-geniushub.dyndns.com"
USERNAME="my-username"
PASSWORD="my-password"

python ghclient.py ${HUB_TOKEN} issues

python ghclient.py ${HUB_ADDRESS} -u ${USERNAME} -p ${PASSWORD} zones -v

You can compare any output to the 'official' API (v1 response):

curl -H "authorization: Bearer ${HUB_TOKEN}" -X GET https://my.geniushub.co.uk/v1/zones/summary
python ghclient.py ${HUB_TOKEN} zones

curl -H "authorization: Bearer ${HUB_TOKEN}" -X GET https://my.geniushub.co.uk/v1/devices
python ghclient.py ${HUB_ADDRESS} -u ${USERNAME} -p ${PASSWORD} devices -v

curl -H "authorization: Bearer ${HUB_TOKEN}" -X GET https://my.geniushub.co.uk/v1/issues
python ghclient.py ${HUB_ADDRESS} -u ${USERNAME} -p ${PASSWORD} issues

You can obtain the 'raw' v3 API responses (i.e. the JSON is not converted to the v1 schema):

python ghclient.py ${HUB_ADDRESS} -u ${USERNAME} -p ${PASSWORD} zones -vvv
python ghclient.py ${HUB_ADDRESS} -u ${USERNAME} -p ${PASSWORD} devices -vvv

To obtain the 'official' v3 API responses takes a little work. First, use python to obtain a HASH:

>>> from hashlib import sha256
>>> hash = sha256()
>>> hash.update(("my_username" + "my_password").encode('utf-8'))
>>> print(hash.hexdigest())
001b24f45b...

Then you can use curl:

curl --user ${USERNAME}:${HASH} -X GET http://${HUB_ADDRESS}:1223/v3/zones

Advanced Features

When used as a library, there is the option to utilize the referencing module's own aiohttp.ClientSession() (recommended).

Here is an example, but see ghclient.py for a more complete example:

import asyncio
import aiohttp
from geniushubclient import GeniusHub

my_session = aiohttp.ClientSession()

...

if not (username or password):
   hub = GeniusHub(hub_id=hub_address, username, password, session=my_session)
else:
   hub = GeniusHub(hub_id=hub_token, session=my_session)

await hub.update()  # enumerate all zones, devices and issues

client.verbosity = 0  # same as v1/zones/summary, v1/devices/summary
print(hub.zones)

client.verbosity = 1  # default, same as v1/zones, v1/devices, v1/issues
print(hub.devices)

print(hub.zone_by_id[3].data["temperature"])
print(hub.device_by_id["2-2"].data)

await session.close()

QA/CI via CircleCI

QA includes comparing JSON from cURL with output from this app using diff, for example:

(venv) root@hostname:~/$ curl -X GET https://my.geniushub.co.uk/v1/zones -H "authorization: Bearer ${HUB_TOKEN}" | \
    python -c "import sys, json; print(json.dumps(json.load(sys.stdin, parse_float=lambda x: int(float(x))), indent=4, sort_keys=True))" > a.out

(venv) root@hostname:~/$ python ghclient.py ${HUB_ADDRESS} -u ${USERNAME} -p ${PASSWORD} zones -v | \
    python -c "import sys, json; print(json.dumps(json.load(sys.stdin, parse_float=lambda x: int(float(x))), indent=4, sort_keys=True))" > b.out

(venv) root@hostname:~/$ diff a.out b.out