innova-controls 2.2.1

Innova Air Conditioner Control API

Innova Control API

Tested on a Innova 2.0 unit

Also supports AirLeaf

Installation

pip install innova_controls

Innova class usage

See test_main.py for some example usage.

This is far from perfect documentation, but it is a start.

Communication protocol

Local Mode

All commands are sent to the unit itself through http at its network IP address: http://[IP_ADDRESS]/api/v/1.

Cloud Mode

Commands are sent to Innova's cloud services at https://innovaenergie.cloud/api/v/1 (or https://fancoil.innovaenergie.cloud/api/v/1 for AirLeaf, but currently not working). The serial number and the MAC Address of the unit are needed when using cloud mode.

The following custom http headers are added to requests to identify units

• "X-serial": UNIT_SERIAL_NUMBER
• "X-UID": UNIT_MAC_ADDRESS

Protocol definition

We just need to append the following commands and parameters where needed.

Ex: curl http://192.168.1.155/api/v/1/status

It is highly recommended to set the IP of your unit to a static DHCP address.

2.0 Commands and Statuses

Action	HTTP Verb	API Endpoint	Data Needed (Content-Type: application/x-www-form-urlencoded)	Extra Info
Status	GET	/status		Returns json object
Power ON	POST	/power/on
Power OFF	POST	/power/off
Scheduling ON	POST	/set/calendar/on
Scheduling OFF (Manual)	POST	/set/calendar/off
Night Mode ON	POST	/set/feature/night	value=1
Night Mode OFF	POST	/set/feature/night	value=0
Set point	POST	/set/setpoint	p_temp=24
Rotation ON	POST	/set/feature/rotation	value=0
Rotation OFF	POST	/set/feature/rotation	value=7
Fan Speed	POST	/set/fan	value=[0-4]	0=auto,1=low,2=med,3=high,4=high++
Cooling	POST	/set/mode/cooling
Heating	POST	/set/mode/heating
Dehumidification	POST	/set/mode/dehumidification
Fan Only	POST	/set/mode/fanonly
Auto	POST	/set/mode/auto

JSON returned by status endpoint:

{
    "RESULT": {
        "a": [],
        "cci": 0,
        "ccv": 0,
        "cfg_lastWorkingMode": 4,
        "cloudConfig": 1,
        "cloudStatus": 4,
        "cm": 0,                       <--- Scheduling Mode: 0=off, 1=on
        "connectionStatus": 2,
        "coolingDisabled": 0,
        "cp": 0,
        "daynumber": 0,
        "fr": 7,                       <--- Fan Rotation: 0=on, 7=off
        "fs": 0,                       <--- Fan Speed: 0=auto, 1=low, 2=med, 3=high, 4=high++
        "heap": 11760,
        "heatingDisabled": 1,
        "heatingResistance": 0,
        "hotelMode": 0,
        "inputFlags": 0,
        "kl": 0,
        "lastRefresh": 3956,
        "ncc": 0,
        "nm": 0,                        <--- Night Mode: 0=off, 1=on
        "ns": 0,
        "ps": 0,                        <--- Power: 0=off, 1=on
        "pwd": "************",
        "sp": 26,                       <--- Temperature Set point
        "t": 16,                        <--- Ambient Temperature
        "timerStatus": 0,
        "uptime": 159660,
        "uscm": 0,
        "wm": 4                         <--- Working Mode: 0=heating, 1=cooling, 3=dehumidification, 4=fanonly. 5=auto
    },
    "UID": "[MAC ADDRESS]",
    "deviceType": "001",
    "net": {
        "dhcp": "1",
        "gw": "XXX.XXX.XXX.XXX",
        "ip": "XXX.XXX.XXX.XXX",
        "sub": "255.255.255.0"
    },
    "setup": {
        "name": "Device Name",
        "serial": "YYYYYYYYY"
    },
    "success": true,
    "sw": {
        "V": "1.0.42"
    },
    "time": {
        "d": 5,
        "h": 17,
        "i": 40,
        "m": 2,
        "y": 2022
    }
}

AirLeaf Commands and Statuses

Action	HTTP Verb	API Endpoint	Data Needed (Content-Type: application/json)	Extra Info
Status	GET	/status		Returns json object
Power ON	POST	/power/on
Power OFF	POST	/power/off
Scheduling ON	POST	/set/calendar/on
Scheduling OFF (Manual)	POST	/set/calendar/off
Set point	POST	/set/setpoint	temp=240	On AirLeaf, temperatures are multiplied by 10
Fan Function Auto	POST	/set/function/auto	value=1
Fan Function Night	POST	/set/function/night	value=1
Fan Function Min	POST	/set/function/min	value=1
Fan Function Max	POST	/set/function/max	value=1
Cooling	POST	/set/mode/cooling
Heating	POST	/set/mode/heating

JSON returned by status endpoint:

{
  "success": true,
  "sw": {
    "V": "1.0.3"
  },
  "UID": "f4:cf:a2:5f:29:ef",
  "deviceType": "002",
  "time": {
    "d": 18,
    "m": 10,
    "y": 2022,
    "h": 6,
    "i": 14
  },
  "net": {
    "gw": "XXX.XXX.XXX.XXX",
    "ip": "XXX.XXX.XXX.XXX",
    "sub": "255.255.255.0"
    "dhcp": "1"
  },
  "setup": {
    "name": "Device Name",
    "serial": "YYYYYYYYY"
  },
  "RESULT": {
    "sp": 200,                        <--- Temperature Set point (x10)
    "wm": 3,                          <--- Working Mode: 3=heating. 5=cooling
    "fn": 1,                          <--- Fan Function: 1=auto, 2=night, 3=min, 4=max
    "kl": 0,
    "lastworkingModeSet": 0,
    "ps": 0,                          <--- Power: 0=off, 1=on
    "cm": 0,                          <--- Scheduling Mode: 0=off, 1=on
    "a": [],
    "ta": 210,                        <--- Ambient Temperature (x10)
    "tw": 219,                        <--- Water Temperature (x10)
    "ns": 0,
    "cloudStatus": 4,
    "connectionStatus": 2,
    "cloudConfig": 1,
    "timerStatus": 0,
    "inputFlags": 0,
    "ncc": 0,
    "lcc": 0,
    "pwd": "",
    "heap": 11496,
    "ccv": 0,
    "cci": 0,
    "daynumber": 0,
    "uptime": 90675,
    "fclFw": 24,
    "uscm": 0,
    "lastRefresh": 2
  }
}