logging-strict 1.3.5

logging.config yaml strict typing and editable

logging.config yaml Strict typing and editable

For logging.config yaml files, logging-strict does the following:

• Editable logging configuration

  While running a Python app, some arbritary package, out of no where, decides to log an informational warning. Within a multiprocessing worker (aka heavy background processing), these logging warnings go from annoying –> disruptive.

  The best can do is adapt to survive. Make this situation quickly solvable by adjusting the app’s logging configuration.

  asyncio is an example package which bleeds informational logging warnings

• curates

  Intention is to have all the valid logging.config yaml in one place

• validator

  logging_strict comes with a logging.config yaml validator. So can check the editted yaml file. Supports pre-commit

• validates against a strictyaml schema

  The schema is specifically tailored for the logging.handlers

  As long as the yaml is valid, will have the data types logging.handlers expect

• exports package data

  Alternative to pkgutil.get_data

  Export data files using a pattern rather than one file at a time

• Python 3.9 through 3.12, and 3.13.0a3 and up.

New in 1.3.x:

resolve dependency conflict by pinning python-dateutil; fix pwd and shutil.chown are non-Windows;

New in 1.2.x:

sphinx object inventories; eliminate sphinx warnings; package logo; tox.ini; many .github/workflows; Tagged version on testpypi, pypi, and readthedocs; badges; VHS tapes; codecov badge;

Why?

logging.config is more often than not hardcoded within a package’s source code. Removing logging.config from the source code and into an exported yaml config file, a package becomes adaptable to unforeseen unexpected bleeding of logging messages.

When a bleed occurs, open the exported logging.config yaml file. Add the offending package to the loggers section or if already there, increase the logging level.

For example, for asyncio, adjust logging level from logging.WARNING –> logging.ERROR

Bye bye disruptive informational logging warning messages.

logging_strict comes with a logging.config yaml validator. So can check the editted yaml file.

On app|worker restart, the logging configuration changes take effect.

Exporting – when

Exports occur before the logging.config yaml files are needed. There are two process types: worker and app

When an app is run, it exports the app logging configuration.

Right before a ProcessPool runs, it exports the worker logging configuration.

Right before a thread or ThreadPool runs, G’d and Darwin sit down to decide which calamity will befall you. Best to avoid that cuz Python logging module is thread-safe. Changes to the logging.config in one thread affects them all and those changes last as long as the app runs.

Safe means safe to remove you from the gene pool. Would be a great name for a horror movie. Don’t be in that movie.

Exporting – where/what

Export location (on linux): $HOME/.local/share/[package name]/

This is xdg user data dir and the configuration is per package. Python logging configurations’ cascade!

Whats exported?

• one for the app

• At least one, for the multiprocessing workers

If a user|coder edits and makes a change, undo’ing those changes would be considered quite rude, minimally, poor ettiquette.

So that gauntlets stay on and package authors live long fulfilling peaceful uneventful lives, overwrite existing logging config yaml files never happens. Although fully capable, just absolutely refuses to do so!

If confident no changes have been made, can manually delete (unlink).

There will be no need for gauntlets, can safely put those away.

Upgrade path

How to upgrade a particular logging.config yaml file?

Best to increment the version and switch the code base to use the latest version

Custom changes should be upstreamed.

Preferred the previous version

There currently isn’t a means to change which logging.config yaml file a package uses.

This sounds like a job for user preference database, gschema. Not yet implemented

Validation

logging.handlers, each, expects parameters to have the correct data type.

yaml package strictyaml, default data type is str, for other types, the function variable name and type must be known (and supported) beforehand.

For custom (handlers, filters, and formatters) functions, there is no way to know beforehand the parameter name and therefore the data type, parameter type will become str

(Assuming the virtual environment is activated)

Within source code (tree)

logging_strict_validate_yaml

Processed: 4 / 4
Success / fail: 4 / 0
last (3): ~/Downloads/logging_strict/src/logging_strict/configs/mp_1_asz.worker.logging.config.yaml

logging_strict_validate_yaml --category worker

Processed: 3 / 3
Success / fail: 3 / 0
last (2): ~/Downloads/logging_strict/src/logging_strict/configs/mp_1_asz.worker.logging.config.yaml

logging_strict_validate_yaml --category app

Processed: 1 / 1
Success / fail: 1 / 0
last (0): ~/Downloads/logging_strict/src/logging_strict/configs/textual_1_asz.app.logging.config.yaml

Note

Two workers are just ordinary yaml files

Withinin logging_strict source tree, bad_idea/folder*/* are two folders, each contains one file.

Although valid yaml, these are not actual logging.config yaml files. Just there for testing purposes

The total *.logging.config.yaml file count and total *.worker.logging.config.yaml are both thrown off by +2

Within xdg user data dir

logging_strict_validate_yaml $HOME/.local/share/logging_strict/ worker

Processed: 1 / 1 Success / fail: 1 / 0 last (0): ~/.local/share/logging_strict/mp_1_asz.worker.logging.config.yaml

logging_strict_validate_yaml $HOME/.local/share/logging_strict/ app

Processed: 1 / 1 Success / fail: 1 / 0 last (0): ~/.local/share/logging_strict/textual_1_asz.app.logging.config.yaml

pre-commit

Locally

repos:
  - repo: local
    hooks:
      - id: validate-logging-config-yaml
        name: validate-logging-config-yaml
        entry: logging_strict_validate_yaml
        language: python
        require_serial: true
        pass_filenames: false

Normal usage

repos:
  - repo: https://github.com/msftcangoblowm/logging-strict
    rev: 0.1.0
    hooks:
      - id: validate-logging-config-yaml
        name: validate-logging-config-yaml
        entry: logging_strict_validate_yaml
        language: python
        require_serial: true
       pass_filenames: false

install

You know how to use pip. This is not that.

Lets discuss integrating logging-strict into your app and history dust binning hardcoded logging configuration.

UI

An entrypoint boilerplate should be structured like, or slightly differently for an async app

def _process_args(): ...

def main():
    d_out = _process_args()
    ...
    # app logging config stuff <--- here!
    app = MyApp()  # <-- not within here
    ...

if __name__ = "__main__":
    main()

This entrypoint is testable. If the argparsing is done within main, it’s time to refactor and rework the entrypoint.

An Entrypoint have defined and documented exit codes. Besides for --help|-h, never prints a message

logging.config yaml – within logging_strict

from logging_strict.constants import
from logging_strict import ui_yaml_curated, LoggingState

genre = "textual"
version_no = "1"
flavor = "asz"  # < -- Yet unpublished testing UI package
package_start_relative_folder = ""

LoggingState().is_state_app = True
ui_yaml_curated(
    genre,
    flavor,
    version_no=version_no,
    package_start_relative_folder=package_start_relative_folder,  # <-- narrows the search
)

logging.config yaml – within another package

from mypackage.constants import urpackagename, package_data_folder_start
from logging_strict import setup_ui_other, LoggingState

genre = "textual"
flavor = "asz"  # < -- Yet unpublished testing UI package
version_no = "1"
package_start_relative_folder = ""

LoggingState().is_state_app = True
setup_ui_other(
    urpackagename,  # <-- Would have been better to curate within logging_strict
    package_data_folder_start,
    genre,
    flavor,
    version_no=version_no,
    package_start_relative_folder=package_start_relative_folder,
)

• package

  Package within which the *.[app|worker].logging.config.yaml files reside.

  Which is preferrably within logging_strict. So all the logging.config yaml in the universe need not be duplicated to the point where it appears to compete with fiat currency.

• package_data_folder_start

  Within that package, which is the package base folder somewhere within the folder tree lies the *.[app|worker].logging.config.yaml files. This is a str, not a relative path.

  One folder name. Does not assume the folder is called data. Does assume data files are within at least one folder. And if not? G’d and Darwin. Or panties are bound to get twisted.

• category

  The function name indicates the purpose. To setup logging.config for a worker, call function, setup_worker

• genre

  From a main app’s POV, genre is the UI framework such as: pyside or textual

  From a worker’s POV, genre hints at the implementation: mp (multiprocessing) or rabbitmq, …

• flavor

  Like a one word brand name to a particular logging.config yaml file. For the initially used the brand, asz, a Python testing UI app

• version_no

  When changes have to be made either: Increment the version by 1 or if purpose is different, fork a new flavor

  If no flavor, version pertains to the genre

• package_start_relative_folder

  Relative to package_data_folder_start, narrows search.

  For example,

  bad_idea/folder0/ and bad_idea/folder1 both contains, mp_1_shared.worker.logging.config.yaml. Which one?

  package_data_folder_start is bad_idea, not configs or data. package_start_relative_folder could be folder0. Which is enough to identify the exact file.

LoggingState

A Singleton holding logging state. To know whether or not, run by app or from cli

(there is also the issue of run by: coverage, unittest, or pytest)

If run from app, and testing app component, logging is redirected to textual.logging.TextualHandler and shouldn’t be changed.

If run from cli, and testing app component, logging is redirected to logging.handlers.StreamHandler, not TextualHandler

During testing, the app and workers are run in all three scenerios.

From coverage, from unittest, and from asz.

While the logging handler is TextualHandler, changing to StreamHandler would be bad. LoggingState aim is to avoid that.

Why would want to do testing from an UI?

• Speeeeeeeeeed!

Minimizing keypresses or actions required to run commands

• Associating unittests to code modules

Which unittest(s) must be run to get 100% coverage for a particular code module?

Without organization, can only imagine that there must always be a 1:1 ratio between unittest and code module. And if not, the unittests folder is just a jumbled mess. And which unittests matter for a particular code module is unknown.

Give a brother a clue!

A clear easily maintainable verifiable guide is necessary.

worker

This is a 2 step process.

• Step 1 – entrypoint

  Extracts yaml from package, validates, then passes as str to the worker process

• Step 2 – worker

  yaml str –> logging.config.dictConfig

within entrypoint

The ProcessPool (not ThreadPool) worker is isolated within it’s own process. So the dirty nature of logging configuration has no effect on other processes.

logging.config yaml file within package, logging_strict

from logging_strict import worker_yaml_curated

genre = "mp"
flavor = "asz"

str_yaml = worker_yaml_curated(genre, flavor)

logging.config yaml file within another package

from logging_strict import worker_yaml_curated

package = "someotherpackage"
package_data_folder_start = "data"  # differs so need to check this folder name

genre = "mp"
flavor = "asz"

str_yaml = setup_worker_other(package, package_data_folder_start, genre, flavor)

within worker

entrypoint passes str_yaml to the (ProcessPool) worker. A worker calls setup_logging_yaml with the yaml str

from logging_strict import setup_logging_yaml

setup_logging_yaml(str_yaml)

To learn more about building UI apps that have multiprocessing.pool.ProcessPool workers, check out the asz source code

Public API

from logging_strict import (
   LoggingConfigCategory,
   LoggingState,
   LoggingYamlType,
   setup_ui_other,
   ui_yaml_curated,
   setup_worker_other,
   worker_yaml_curated,
   setup_logging_yaml,
   LoggingStrictError,
   LoggingStrictPackageNameRequired,
   LoggingStrictPackageStartFolderNameRequired,
   LoggingStrictProcessCategoryRequired,
   LoggingStrictGenreRequired,
)

• LoggingConfigCategory

  tl;dr; ^^ won’t need this ^^

  Process categories Enum. Iterate over the Enum values, using class method, categories.

  strict_logging public methods are convenience functions for class, strict_logging.logging_api.LoggingConfigYaml. If LoggingConfigYaml used directly, choose one of the LoggingConfigCategory values to pass as param, category.

• LoggingYamlType

  tl;dr; ^^ won’t need this ^^

  Useful only during strict type checking. class LoggingConfigYaml implements LoggingYamlType interface and is a direct subclass

• LoggingStrictError

  logging_strict catch all Exception. Base type of other exceptions. Implements ValueError

  The other exceptions are self explanatory. When creating worker entrypoints, can set exit codes based on which exception occurred.

Whats strictyaml?

Unfortunately yaml spec is too broad, allowing undesirable complexity, which are a frequent cause of security issues. Read more:

• [why]

• [why nots]

strictyaml ([docs]) mitigates yaml security issues:

• by only supporting a subset of the yaml spec

• type-safe YAML parsing and validation against a schema

  In our case, specialized to support the built-in Python logging.handlers and adaptable enough to support custom handlers, filters, and formatters