mms-client 1.9.2

API client for accessing the MMS

Overview

This repository contains a Python client that is capable of communication with the Market Management System (MMS), which handles requests related to Flex or Virtual Power Plant (VPP) trading. The underlying library relies on SOAP communication, which is a pain to work with at the best of times. This particular SOAP API adds its own special layer of obnoxiousness, however. As such, it was deemed useful to have a client which would obfuscate most, if not all of this away from the user.

Communication

The underlying API sends and receives XML documents. Each of these request or responses, which we will hereafter refer to as outer requests and responses, contains metadata about the request/response as well as three fields which are extremely important to successful communication with the API:

• Attachments data, included as a list of elements with the binary data in a base-64 encoded format
• Payload data, encoded in a base-64 encoded format
• Payload signature, which is the SHA256 hash of the payload XML data, then signed with an RSA key, in a base-64 encoded format

After the data has been converted and added to the outer request object, it is sent to the appropriate server endpoint via a Zeep client. The client certificate is also injected into the request using a PCKS12 adaptor.

Domain

The domain to use when signing the content ID to MTOM attachments is specified when creating the client. This is not verified by the server, but it is used to generate the content ID for the MTOM attachments. As such, it is important to ensure that the domain is correct.

Serialization

This library relies on Pydantic 2 and the pydantic-xml library for serialization/deserialization. As such, any type in this library can be converted to not only XML, but to JSON as well. This is extremely useful if you're trying to build a pass-through API service or something similar.

Client Types

Clients cannot call any and all endpoints in this API, willy-nilly. Some endpoints are restricted to particular clients. At the moment, there are three clients: Balance Service Providers (BSPs), Market Operators (MOs), and Transmission Service Operators (TSOs). Most likely you're operating as a BSP or MO, in which case you'll have access to most or all endpoints. However, it makes little sense for a TSO to be able to submit bids on their own power, so they are restricted to a read-only role in most cases.

Note that MOs and BSPs access the MMS service using the same endpoints, but have distinct permissions. As such, both client types are supported explicitly here.

Should you request an endpoint which you are not authorized for, you will receive an mms_client.utils.errors.AudienceError.

Interface Type

The MMS has two separate endpoints, depending on whether you want to access market information (MI), or other market information (OMI). Really informative, I know. Fortunately, we have designed this API in such a way that the distinction around which interface is which is unnecessary for you to know. However, note that separate Zeep clients will be maintained for each interface. These will be created as needed, which endpoints requiring the associated interface are first called. These are both setup to cache schemas to improve performance, as well. The memory required for these clients is still light, but you may want to reduce that further based on your application.

Object Hierarchy

The object hierarchy contained in this project is not trivial, and perhaps that reflects a bit of overengineering on our part. However, we chose the paradigm we did to reduce the number of types which had to be exposed to the user. The diagram below indicates how this hierarchy works:

Note that there are some types here that are shared between the request and response: mainly, anything inheriting from mms_client.types.base.Envelop or mms_client.types.base.Payload. For users of the client, only the Payload types need ever be used. Everything else has been obfuscated away, so it is unecessary for the user to have access to these. However, we will explain our reasoning here to provide additional context.

Requests

The primary request DTO is the mms_client.types.transport.MmsRequest object. The majority of the fields here are metadata specifying how the client should communicate with the MMS server. However, requestData, requestSignature and attachmentData do bear considering as these represent the actual request, a signature used to verify that the request was received, and any attachments to the request, respectively. As mentioned before, requestData and attachementData can each represent more complex objects, which should be serialized and then encoded as base-64 strings.

Responses

The primary response DTO is the mms_client.types.transport.MmsResponse object. Similar to the request DTO, this object includes a number of fields containing metadata describing how the response should be interpretted. Currently, only uncompressed XML is supported and any other response type will result in an mms_client.utils.errors.MmsClientError. Again, the requestData and attachmentData fields contain the payload data, encoded as base-64 strings.

BaseResponse

This object represents the top-level XML element contained within the MmsResponse. It contains all other response data. Note that the structure of this object will not mimic the structure of the XML response, as that structure is incompatible with the philosophy of this library. However, all the information has been preserved. This type contains a number of validation elements as well as the envelope.

Response & MultiResponse

These objects contain the actual payload data and inherit from BaseResponse. These are what will actually be returned from the deserialization process. They also contain validation data for the top-level paylaod item(s). The difference between Response and MultiResponse is that the former contains a single item and the latter contains a list.

Envelopes

Not to be confused with the SOAP envelope, this envelope contains the method parameters used to send requests to the MMS server. For example, if you wanted to send a market-related request, this would take on the form of a MarketQuery, MarketSubmit or MarketCancel object. This is combined with the payload during the serialization process to produce the final XML payload before injecting it into the MmsRequest. During the deserialization process, this is extracted from the XML paylod on the MmsResponse object. Each of these should inherit from mms_client.types.base.Envelope.

Payloads

This is the actual data that is sent to and returned from client methods and represent the actual "data", as contained on the MMS server. As such, these represent the first-class objects within this library. During the serialization process, this data is inserted into the envelope before being serialized to XML. During the deserialization process, these objects are extracted from the envelope XML and converted to the object therein. Each of these should inherit from mms_client.types.base.Payload. Note, however, that not everything that inherits from this class will represent a top-level object.

Validation

There are a number of validation objects returned with the response, each with its own purpose. Any case resulting in a validation failure will cause an mms_client.utils.errors.MMSValidationError to be raised.

ProcessingStatistics

This object describes the number of items in the request that were received, the number of valid items, the number of invalid items, the number of items successfully and unsuccessfully returned, respectively. This object also features some information on the latency and receipt time of the request. Given how the MMS determines the values of these fields, this client will check that there are no invalid files and raise an exception otherwise.

ResponseCommon

This object can be found on the envelope and top-level payload object(s) within the response. It contains a success flag and a value describing whether or not validation passed. If success is True, then validation should be either "PASSED" or "NOT_DONE". Any other status indicates a failure and will result in an exception.

Messages

Each Payload object will have a collection of messages. These are organized into three categories: information, warnings and errors. Information and warnings will be logged, but will not cause validation failures. Errors will, however, result in an exception being raised.

Authentication

The authentication scheme used by the MMS has been forced down to this client, but we have tried to make it nicer for our users to ingest. Essentially, to authenticate requests with the MMS server, three pieces of information are required.

Certificate

The MMS should have made a certificate available to you when you signed up to access the system. This certificate should be a PCKS#12 file and should have a passphrase associated with it. We have created a convenience class to handle this objects, called mms_client.security.certs.Certificate. There are a number of ways the certificate can be created, as demonstrated below:

from pathlib import Path
from mms_client.security.certs import Certificate

# Create a cert from a path to a certificate
cert = Certificate("/path/to/my/cert.p12", "my_passphrase")

# Create a cert using a Path object
cert = Certificate(Path("/path/to/my") / "cert.p12", "my_passphrase")

# Create a cert using the raw certificate data
with open("/path/to/my/cert.p12", "rb") as f:
    cert = Certificate(f.read(), "my_passphrase")

This object can then be used to generate signatures for requests, and also to create a Pkcs12Adapter, which is mounted to the HTTP sessions used to send those same requests. As such, this one object represents the single source of authentication for the entire package.

Participant Name

This is a 4-digit alphanumerical code that can be used to identify the market participant to which a user belongs, and on behalf of whom a request is being made. This value must be provided when an MMS client is created, and it must match the value encoded in the certificate and also the participant to whom the certificate is registered on the MMS server.

User Name

This is a 1-12 digit alphanumerical code that can be used to identify the user making the request. This value must be provided when an MMS client is created, and it must match the value encoded in the certificate and also the user to whom the certificate is registered on the MMS server.

Examples

This section includes some examples of creating a client and requesting data.

Basic Example

Create the base client and then add an offer.

from pendulum import DateTime

from mms_client.client import MmsClient
from mms_client.security.certs import Certificate
from mms_client.types.market import MarketType
from mms_client.types.offer import Direction, OfferData, OfferStack
from mms_client.utils.web import ClientType

# Create a certificate
cert = Certificate("/path/to/my/cert.p12", "fake_passphrase")

# Create a new MMS client
client = MmsClient(domain="mydomain.com", participant="F100", user="FAKEUSER", client_type=ClientType.BSP, cert)

# Create our request offer
request_offer = OfferData(
    stack=[
        OfferStack(
            number=1,
            unit_price=100,
            minimum_quantity_kw=100,
        ),
    ],
    resource="FAKE_RESO",
    start=DateTime(2024, 3, 15, 12),
    end=DateTime(2024, 3, 15, 21),
    direction=Direction.SELL,
)

# Submit our offer to the client, returning the completed offer
response_offer = client.put_offer(
    request=request_offer,
    market_type=MarketType.DAY_AHEAD,
    days=1,
)

# Print out the response offer
print(response_offer)

There's a lot of code here but it's not terribly difficult to understand. All this does is pull in the authentication data, create the client, create the payload, submit it to the server and retrieve the response.

Connecting to a Test Server

If you want to test your MMS connection, you can try using the test server:

client = MmsClient(domain="mydomain.com", participant="F100", user="FAKEUSER", client_type=ClientType.BSP, cert, test=True)

Connecting as a Market Admin

If you're connecting as a market operator (MO), you can connect in admin mode:

client = MmsClient(domain="mydomain.com", participant="F100", user="FAKEUSER", client_type=ClientType.BSP, cert, is_admin=True)

Auditing XML Requests & Responses

A common requirement for this sort of library is recording or saving the raw XML requests and responses for audit/logging purposes. This library supports this workflow through the mms_client.utils.plugin.Plugin object. This object intercepts the XML request at the Zeep client level right before it is sent to the MMS and, similarly, intercepts the XML response immediately after it is received from the MMS. Before passing these objects on, without modifying them, it records the XML data as a byte string and passes it to two methods: audit_request and audit_response. These can be overridden by any object that inherits from this class, allowing the user to direct this data to whatever store they prefer to use for auditing or logging.

class TestAuditPlugin(Plugin):

    def __init__(self):
        self.request = None
        self.response = None

    def audit_request(self, mms_request: bytes) -> None:
        self.request = mms_request

    def audit_response(self, mms_response: bytes) -> None:
        self.response = mms_response

client = MmsClient(domain="mydomain.com", participant="F100", user="FAKEUSER", client_type=ClientType.BSP, cert, plugins=[TestAuditPlugin()])

This same input allows for the user to create their own plugins and add them to the Zeep client, allowing for a certain amount of extensibility.

Completeness

This client is not complete. Currently, it supports the following endpoints:

• MarketQuery_ReserveRequirementQuery
• MarketSubmit_OfferData
• MarketQuery_OfferQuery
• MarketCancel_OfferCancel
• MarketQuery_AwardResultsQuery
• RegistrationSubmit_Resource
• RegistrationQuery_Resource
• ReportCreateRequest
• ReportListRequest
• ReportDownloadRequestTrnID
• BSP_ResourceList

We can add support for additional endpoints as time goes on, and independent contribution is, of course, welcome. However, support for attachments is currently limited because none of the endpoints we support currently require them. We have implemented attachment support up to the client level, but we haven't developed an architecture for submitting them through an endpoint yet.

Installation

We have a package on PyPI so installation is as easy as doing:

pip install mms-client

or

poetry add mms-client