mqtt_text2speech 0.1.1

A simple MQTT audio client for synthesizing text messages published to an MQTT broker

Simple MQTT Text2Speech Client

This MQTT client subscribes to an 'OutputTopic' where text messages can be published, which the client will then speak using pyttsx3. The start of the speech output by the MQTT client is signaled on the 'StartedTopic'. Once the speech output is finished, the MQTT client signals this on the 'FinishedTopic'.

Environment Variables

The parameters of the MQTT Text2Speech client are read as environment variables from a .env file. The following environment variables need to be defined inside the .env file:

OUTPUT_TOPIC = "/output-topic-msgs-are-published-to"
STARTED_TOPIC = "/started-topic"
FINISHED_TOPIC = "/finished-topic"

MQTT_BROKER_HOST = "host-ip-address"
MQTT_BROKER_PORT = "1883"
MQTT_BROKER_USERNAME = "mqtt-broker-username"
MQTT_BROKER_PASSWORD = "mqtt-broker-password"

RATE = 150 
VOLUME = 1.0 
VOICE = 0

Starting the MQTT Text2SpeechClient

import logging
from mqtt_text2speech.client import Text2SpeechClient

# Logging configuration to see output (optional)
logging.basicConfig(format='%(asctime)s %(levelname)-8s %(message)s',
                    level=logging.INFO,
                    datefmt='%Y-%m-%d %H:%M:%S')

# Start MQTT Text2SpeechClient with environment variables configured in .env file
client = Text2SpeechClient()
client.start()

# Do stuff (Loop to keep main thread busy)
while True: 
    pass

# Connection to MQTT Broker will be closed if main thread ends
client.stop()