plex-mpv-shim 1.11.0

Cast media from Plex Mobile and Web apps to MPV. (Unofficial)

MPV Shim for Plex

MPV Shim is a simple and lightweight Plex client, with support for Windows and Linux. Think of it as an open source Chromecast for Plex. You can cast almost anything from Plex and it will Direct Play. Subtitles are fully supported, and there are tools to manage them like no other Plex client.

Getting Started

If you are on Windows, simply download the binary. If you are using Linux or OSX, please see the Linux Installation or OSX Installation sections below.

To use the client, simply launch it and cast your media from another Plex application. The mobile and web applications are supported. You do not have to log in to the client or set it up in any other way.

If you want to use the web application to cast, you must either be on the same network as a Plex server (an empty one will work) or install the MPV Shim Local Connection user script.

The application runs with a notification icon by default. You can use this to view the application log, open the config folder, and open the application menu.

Advanced Features

Menu

To open the menu, press c on your computer or home within the Plex mobile apps.

The menu enables you to:

• Adjust video transcoding quality.
• Change the default transcoder settings.
• Change subtitles or audio, while knowing the track names.
• Change subtitles or audio for an entire series at once.
• Mark the media as unwatched and quit.
• Configure shader packs and SVP profiles.

On your computer, use the arrow keys, enter, and escape to navigate. On your phone, use the arrow buttons, ok, back, and home to navigate. (The option for remote controls is shown next to the name of the client when you select it from the cast menu.)

Please also note that the on-screen controller for MPV (if available) cannot change the audio and subtitle track configurations for transcoded media. It also cannot load external subtitles. You must either use the menu or the application you casted from.

Shader Packs

Shader packs are a recent feature addition that allows you to easily use advanced video shaders and video quality settings. These usually require a lot of configuration to use, but MPV Shim's default shader pack comes with FSRCNNX and Anime4K preconfigured. Try experimenting with video profiles! It may greatly improve your experience.

Shader Packs are ready to use as of the most recent MPV Shim version. To use, simply navigate to the Video Playback Profiles option and select a profile.

For details on the shader settings, please see default-shader-pack. If you would like to customize the shader pack, there are details in the configuration section.

SVP Integration

SVP integration allows you to easily configure SVP support, change profiles, and enable/disable SVP without having to exit the player. It is not enabled by default, please see the configuration instructions for instructions on how to enable it.

Keyboard Shortcuts

This program supports most of the keyboard shortcuts from MPV. The custom keyboard shortcuts are:

• < > to skip episodes
• q to close player
• w to mark watched and skip
• u to mark unwatched and quit
• c to open the menu

Here are the notable MPV keyboard shortcuts:

• space - Pause/Play
• left/right - Seek by 5 seconds
• up/down - Seek by 1 minute
• s - Take a screenshot
• S - Take a screenshot without subtitles
• f - Toggle fullscreen
• ,/. - Seek by individual frames
• [/] - Change video speed by 10%
• {/} - Change video speed by 50%
• backspace - Reset speed
• m - Mute
• d - Enable/disable deinterlace
• Ctrl+Shift+Left/Right - Adjust subtitle delay.

Configuration

The configuration file is located in different places depending on your platform. You can open the configuration folder using the systray icon. When you launch the program on Linux or OSX from the terminal, the location of the config file will be printed. The locations are:

• Windows - %appdata%\plex-mpv-shim\conf.json
• Linux - ~/.config/plex-mpv-shim/conf.json
• Mac OSX - Library/Application Support/plex-mpv-shim/conf.json
• CygWin - ~/.config/plex-mpv-shim/conf.json

You can specify a custom configuration folder with the --config option.

Transcoding

You can adjust the basic transcoder settings via the menu.

• always_transcode - This will tell the client to always transcode, without asking. Default: false
  • This may be useful if you are using limited hardware that cannot handle advanced codecs.
  • You may have some luck changing client_profile in the configuration to a more restrictive one.
• auto_transcode - This will ask the server to determine if transcoding is suggested. Default: true
  • transcode_kbps - Transcode bandwidth to request. Default: 2000
  • direct_limit - Also limit direct play to transcode_kbps. Default: false
  • Note that direct_limit cannot be overriden without changing transcode_kbps.
  • If direct_limit is not set, the player assumes the server will set the limit.
• adaptive_transcode - Tell the server to adjust the quality while streaming. Default: false

Shell Command Triggers

You can execute shell commands on media state using the config file:

• media_ended_cmd - When all media has played.
• pre_media_cmd - Before the player displays. (Will wait for finish.)
• stop_cmd - After stopping the player.
• idle_cmd - After no activity for idle_cmd_delay seconds.

Subtitle Visual Settings

All of these settings apply to direct play and are adjustable through the controlling app. Note that some may not work depending on the subtitle codec. Subtitle position and color are not available for transcodes.

• subtitle_size - The size of the subtitles, in percent. Default: 100
• subtitle_color - The color of the subtitles, in hex. Default: #FFFFFFFF
• subtitle_position - The position (top, bottom, middle). Default: bottom

External MPV

The client now supports using an external copy of MPV, including one that is running prior to starting the client. This may be useful if your distribution only provides MPV as a binary executable (instead of as a shared library), or to connect to MPV-based GUI players. Please note that SMPlayer exhibits strange behaviour when controlled in this manner. External MPV is currently the only working backend for media playback on OSX.

• mpv_ext - Enable usage of the external player by default. Default: false
  • The external player may still be used by default if libmpv1 is not available.
• mpv_ext_path - The path to the mpv binary to use. By default it uses the one in the PATH. Default: null
  • If you are using Windows, make sure to use two backslashes. Example: C:\\path\\to\\mpv.exe
• mpv_ext_ipc - The path to the socket to control MPV. Default: null
  • If unset, the socket is a randomly selected temp file.
  • On Windows, this is just a name for the socket, not a path like on Linux.
• mpv_ext_start - Start a managed copy of MPV with the client. Default: true
  • If not specified, the user must start MPV prior to launching the client.
  • MPV must be launched with --input-ipc-server=[value of mpv_ext_ipc].
• mpv_ext_no_ovr - Disable built-in mpv configuration files and use user defaults.
  • Please note that some scripts and settings, such as ones to keep MPV open, may break functionality in MPV Shim.

Keyboard Shortcuts

You can reconfigure the custom keyboard shortcuts. You can also set them to null to disable the shortcut. Please note that disabling keyboard shortcuts may make some features unusable. Additionally, if you remap q, using the default shortcut will crash the player.

• kb_stop - Stop playback and close MPV. (Default: q)
• kb_prev - Go to the previous video. (Default: <)
• kb_next - Go to the next video. (Default: >)
• kb_watched - Mark the video as watched and skip. (Default: w)
• kb_unwatched - Mark the video as unwatched and quit. (Default: u)
• kb_menu - Open the configuration menu. (Default: c)
• kb_menu_esc - Leave the menu. Exits fullscreen otherwise. (Default: esc)
• kb_menu_ok - "ok" for menu. (Default: enter)
• kb_menu_left - "left" for menu. Seeks otherwise. (Default: left)
• kb_menu_right - "right" for menu. Seeks otherwise. (Default: right)
• kb_menu_up - "up" for menu. Seeks otherwise. (Default: up)
• kb_menu_down - "down" for menu. Seeks otherwise. (Default: down)
• kb_pause - Pause. Also "ok" for menu. (Default: space)
• kb_debug - Trigger pdb debugger. (Default: ~)
• seek_up - Time to seek for "up" key. (Default: 60)
• seek_down - Time to seek for "down" key. (Default: -60)
• seek_right - Time to seek for "right" key. (Default: 5)
• seek_left - Time to seek for "left" key. (Default: -5)

Shader Packs

Shader packs allow you to import MPV config and shader presets into MPV Shim and easily switch between them at runtime through the built-in menu. This enables easy usage and switching of advanced MPV video playback options, such as video upscaling, while being easy to use.

If you select one of the presets from the shader pack, it will override some MPV configurations and any shaders manually specified in mpv.conf. If you would like to customize the shader pack, use shader_pack_custom.

• shader_pack_enable - Enable shader pack. (Default: true)
• shader_pack_custom - Enable to use a custom shader pack. (Default: false)
  • If you enable this, it will copy the default shader pack to the shader_pack config folder.
  • This initial copy will only happen if the shader_pack folder didn't exist.
  • This shader pack will then be used instead of the built-in one from then on.
• shader_pack_remember - Automatically remember the last used shader profile. (Default: true)
• shader_pack_profile - The default profile to use. (Default: null)
  • If you use shader_pack_remember, this will be updated when you set a profile through the UI.
• shader_pack_subtype - The profile group to use. The default pack contains lq and hq groups. Use hq if you have a fancy graphics card.

SVP Integration

To enable SVP integration, set svp_enable to true and enable "External control via HTTP" within SVP under Settings > Control options. Adjust the svp_url and svp_socket settings if needed.

• svp_enable - Enable SVP integration. (Default: false)
• svp_url - URL for SVP web API. (Default: http://127.0.0.1:9901/)
• svp_socket - Custom MPV socket to use for SVP.
  • Default on Windows: mpvpipe
  • Default on other platforms: /tmp/mpvsocket

Currently on Windows the built-in MPV does not work with SVP. You must download MPV yourself.

• Download the latest MPV build from here.
• Follow the vapoursynth instructions.
  • Make sure to use the latest Python, not Python 3.7.
• In the config file, set mpv_ext to true and mpv_ext_path to the path to mpv.exe.
  • Make sure to use two backslashes per each backslash in the path.

Other Configuration Options

• player_name - The name of the player that appears in the cast menu. Initially set from your hostname.
• http_port - The TCP port to listen on for Plex to control the player. Default: 3000
• enable_play_queue - Enable play queue support. Default: true
  • If you disable this, the application will queue media based on the series.
  • This is a legacy feature. It is not regularly tested.
• client_uuid - The identifier for the client. Set to a random value on first run.
• audio_ac3passthrough - Does not work. Currently only changes transcoder settings. Default: false
• audio_dtspassthrough - Does not work. Currently only changes transcoder settings. Default: false
• allow_http - Allow insecure Plex server connections. Default: false
  • This may be useful if you are using a Plex server offline or not signed in.
• client_profile - The client profile for transcoding. Default: Plex Home Theater
  • It may be useful to change this on limited hardware.
  • If you change this, it should be changed to a profile that supports hls streaming.
• sanitize_output - Prevent Plex tokens from being printed to the console. Default: true
• fullscreen - Fullscreen the player when starting playback. Default: true
• enable_gui - Enable the system tray icon and GUI features. Default: true
• media_key_seek - Use the media next/prev keys to seek instead of skip episodes. Default: false
• enable_osc - Enable the MPV on-screen controller. Default: true
  • It may be useful to disable this if you are using an external player that already provides a user interface.
• log_decisions - Log the full playback URLs. Default: false
• mpv_log_level - Log level to use for mpv. Default: info
  • Options: fatal, error, warn, info, v, debug, trace
• idle_when_paused - Consider the player idle when paused. Default: false
• stop_idle - Stop the player when idle. (Requires idle_when_paused.) Default: false
• skip_intro_always - Always skip intros, without asking. Default: false
• skip_intro_prompt - Prompt to skip intro via seeking. Default: true
• menu_mouse - Enable mouse support in the menu. Default: true
  • This requires MPV to be compiled with lua support.

MPV Configuration

You can configure mpv directly using the mpv.conf and input.conf files. (It is in the same folder as conf.json.) This may be useful for customizing video upscaling, keyboard shortcuts, or controlling the application via the mpv IPC server.

Tips and Tricks

Various tips have been found that allow the media player to support special functionality, albeit with more configuration required.

Open on Specific Monitor

Please note: Edits to the mpv.conf will not take effect until you restart the application. You can open the config directory by using the menu option in the system tray icon.

Option 1: Select fullscreen output screen through MPV. Determine which screen you would like MPV to show up on.

• If you are on Windows, right click the desktop and select "Display Settings". Take the monitor number and subtract one.
• If you are on Linux, run xrandr. The screen number is the number you want. If there is only one proceed to Option 2.

Add the following to your mpv.conf in the config directory, replacing 0 with the number from the previous step:

fs=yes
fs-screen=0

Option 2: (Linux Only) If option 1 does not work, both of your monitors are likely configured as a single "screen".

Run xrandr. It should look something like this:

Screen 0: minimum 8 x 8, current 3520 x 1080, maximum 16384 x 16384
VGA-0 connected 1920x1080+0+0 (normal left inverted right x axis y axis) 521mm x 293mm
   1920x1080     60.00*+
   1680x1050     59.95  
   1440x900      59.89  
   1280x1024     75.02    60.02  
   1280x960      60.00  
   1280x800      59.81  
   1280x720      60.00  
   1152x864      75.00  
   1024x768      75.03    70.07    60.00  
   800x600       75.00    72.19    60.32    56.25  
   640x480       75.00    59.94  
LVDS-0 connected 1600x900+1920+180 (normal left inverted right x axis y axis) 309mm x 174mm
   1600x900      59.98*+

If you want MPV to open on VGA-0 for instance, add the following to your mpv.conf in the config directory:

fs=yes
geometry=1920x1080+0+0

Option 3: (Linux Only) If your window manager supports it, you can tell the window manager to always open on a specific screen.

• For OpenBox: https://forums.bunsenlabs.org/viewtopic.php?id=1199
• For i3: https://unix.stackexchange.com/questions/96798/i3wm-start-applications-on-specific-workspaces-when-i3-starts/363848#363848

Control Volume with Mouse Wheel

Add the following to input.conf:

WHEEL_UP add volume 5
WHEEL_DOWN add volume -5

MPRIS Plugin

Set mpv_ext to true in the config. Add script=/path/to/mpris.so to mpv.conf.

Run Multiple Instances

You can pass --config /path/to/folder to run another copy of the player. Make sure to change the port that the player uses.

Audio Passthrough

You can edit mpv.conf to support audio passthrough. A user on Reddit had luck with this config:

audio-spdif=ac3,dts,eac3 # (to use the passthrough to receiver over hdmi)
audio-channels=2 # (not sure this is necessary, but i keep it in because it works)
af=scaletempo,lavcac3enc=yes:640:3 # (for aac 5.1 tracks to the receiver)

MPV Crashes with "The sub-scale option must be a floating point number or a ratio"

Run the plex-mpv-shim program with LC_NUMERIC=C.

Use with gnome-mpv/celluloid

You can use gnome-mpv with MPV Shim, but you must launch gnome-mpv separately before MPV Shim. (gnome-mpv doesn't support the MPV command options directly.)

Configure MPV Shim with the following options (leave the other ones):

{
    "mpv_ext": true,
    "mpv_ext_ipc": "/tmp/gmpv-socket",
    "mpv_ext_path": null,
    "mpv_ext_start": false,
    "enable_osc": false
}

Then within gnome-mpv, click the application icon (top left) > Preferences. Configure the following Extra MPV Options:

--idle --input-ipc-server=/tmp/gmpv-socket

Heavy Memory Usage

A problem has been identified where MPV can use a ton of RAM after media has been played, and this RAM is not always freed when the player goes into idle mode. Some users have found that using external MPV lessens the memory leak. To enable external MPV on Windows:

• Download a copy of MPV
• Unzip it with 7zip.
• Configure mpv_ext to true. (See the config section.)
• Configure mpv_ext_path to C:\\replace\\with\\path\\to\\mpv.exe. (Note usage of two \\.)
• Run the program and wait. (You'll probably have to use it for a while.)
• Let me know if the high memory usage is with mpv.exe or the shim itself.

On Linux, the process is similar, except that you don't need to set the mpv_ext_path variable. On OSX, external MPV is already the default and is the only supported player mode.

In the long term, I may look into a method of terminating MPV when not in use. This will require a lot of changes to the software.

Development

If you'd like to run the application without installing it, run ./run.py. The project is written entirely in Python 3. There are no closed-source components in this project. It is fully hackable.

The project is dependent on python-mpv, python-mpv-jsonipc, and requests. If you are using Windows and would like mpv to be maximize properly, pywin32 is also needed. The GUI component uses pystray and tkinter, but there is a fallback cli mode.

If you are using a local firewall, you'll want to allow inbound connections on TCP 3000 and UDP 32410, 32412, 32413, and 32414. The TCP port is for the web server the client uses to recieve commands. The UDP ports are for the GDM discovery protocol.

This project is based on https://github.com/wnielson/omplex, which is available under the terms of the MIT License. The project was ported to python3, modified to use mpv as the player, and updated to allow all features of the remote control api for video playback. The shaders included in the shader pack are also available under verious open source licenses, which you can read about here.

Linux Installation

If you are on Linux, you can install via pip. You'll need libmpv1 or mpv installed.

sudo pip3 install --upgrade plex-mpv-shim

If you would like the GUI and systray features, also install pystray and tkinter:

sudo pip3 install pystray
sudo apt install python3-tk

You can build mpv from source to get better codec support. Execute the following:

sudo pip3 install --upgrade python-mpv
sudo apt install autoconf automake libtool libharfbuzz-dev libfreetype6-dev libfontconfig1-dev libx11-dev libxrandr-dev libvdpau-dev libva-dev mesa-common-dev libegl1-mesa-dev yasm libasound2-dev libpulse-dev libuchardet-dev zlib1g-dev libfribidi-dev git libgnutls28-dev libgl1-mesa-dev libsdl2-dev cmake wget python g++ libluajit-5.1-dev
git clone https://github.com/mpv-player/mpv-build.git
cd mpv-build
echo --enable-libmpv-shared > mpv_options
./rebuild -j4
sudo ./install
sudo ldconfig

OSX Installation

Currently on OSX only the external MPV backend seems to be working. I cannot test on OSX, so please report any issues you find.

To install the CLI version:

1. Install brew. (Instructions)
2. Install python3 and mpv. brew install python mpv
3. Install plex-mpv-shim. pip3 install --upgrade plex-mpv-shim
4. Run plex-mpv-shim.

If you'd like to install the GUI version, you need a working copy of tkinter.

1. Install pyenv. (Instructions)
2. Install TK and mpv. brew install tcl-tk mpv
3. Install python3 with TK support. FLAGS="-I$(brew --prefix tcl-tk)/include" pyenv install 3.8.1
4. Set this python3 as the default. pyenv global 3.8.1
5. Install plex-mpv-shim and pystray. pip3 install --upgrade plex-mpv-shim pystray
6. Run plex-mpv-shim.

Building on Windows

There is a prebuilt version for Windows in the releases section. When following these directions, please take care to ensure both the python and libmpv libraries are either 64 or 32 bit. (Don't mismatch them.)

1. Install Python3 with PATH enabled. Install 7zip.
2. After installing python3, open cmd as admin and run pip install --upgrade pyinstaller python-mpv requests pywin32 pystray python-mpv-jsonipc.
3. Download libmpv.
4. Extract the mpv-1.dll from the file and move it to the plex-mpv-shim folder.
5. Open a regular cmd prompt. Navigate to the plex-mpv-shim folder.
6. If you would like the shader pack included, download it and put the contents into plex_mpv_shim\default_shader_pack.
7. Run pyinstaller -wF --add-binary "mpv-1.dll;." --add-data "plex_mpv_shim\default_shader_pack;plex_mpv_shim\default_shader_pack" --add-binary "plex_mpv_shim\systray.png;." --icon media.ico run.py --hidden-import pystray._win32.