ProdigyHelmsman 0.0.7

Developing

To do any development, you must install Reahl in a virtual environment. For detailed instructions please refer to the Reahl website (https://www.reahl.org/docs/5.1/tutorial/gettingstarted-install.d.html) The basic steps are as follow:

1. Prerequisites (for these instructions)

   • Linux 20.4 (Ubuntu)

   • Python 3.8

   • Git 2.25.1

2. Install a virtual environment

   • You can setup the virtual environment in a different directory than from your development directory.

   • Make sure you have sufficient rights to the directory directories.

   • Install the virtual environment

   • Activate the virtual environment

   • The prompt should change to indicate that your virtual environment is active.

$ sudo chmod 777 /usr/local
$ python3 -m venv /usr/local/prodigyhelmsman_env
$ source /usr/local/prodigyhelmsman_env/bin/activate

3. Install Reahl in the virtual environment

   • Change to or create the directory where you want to install your project. Your home directory might be the safest for now.

   • The instructions below will prepare Reahl to connect to a Sqlite database.

   • Add/replace the mysql parameter in the instruction below depending on your requirement.

$ cd ~
$ pip3 install reahl[declarative,sqlite,dev,doc]

4. Clone the project from GitHub

$ git clone https://github.com/hendrikdutoit/ProdigyHelmsman

5. Configure ProdigyHelmsman

$ cd ./ProdigyHelmsman/
$ reahl setup develop -N
$ reahl createdbuser etc
$ reahl createdb etc
$ reahl createdbtables etc

6. Load test data

   • The database is empty.

   • The demosetup procedure will load test data into the database

$ reahl demosetup

7. Start the simulator

   • The simulator server is now operational on http://localhost:8000

$ reahl serve etc

8. Run a sample

   • Open-up another session

   • Run the enquire_country script.

   • Start the enquire_country with command line option “1”. This will connect to the local server. Option “2” will connect to www.prodigyhelmsman.co.za

$ cd ~
$ cd ./ProdigyHelmsman/
$ python3 prodigyhelmsman/enquire_country.py 1
API End Point:  list_countries
Method:                 _list_countries_method
Url:                    http://localhost:8000/api/
Status                  200
{'cca3': 'AUS', 'cca2': 'AU', 'name_common': 'Australia', 'curr_iso': 'AUD'}
{'cca3': 'SWZ', 'cca2': 'SZ', 'name_common': 'Eswatini', 'curr_iso': 'ZAR'}
{'cca3': 'SWZ', 'cca2': 'SZ', 'name_common': 'Eswatini', 'curr_iso': 'SZL'}
{'cca3': 'DER', 'cca2': 'DE', 'name_common': 'Federal Republic of Germany', 'curr_iso': 'EUR'}
{'cca3': 'LSO', 'cca2': 'LS', 'name_common': 'Lesotho', 'curr_iso': 'ZAR'}
{'cca3': 'LSO', 'cca2': 'LS', 'name_common': 'Lesotho', 'curr_iso': 'LSL'}
{'cca3': 'ZAF', 'cca2': 'ZA', 'name_common': 'South Africa', 'curr_iso': 'ZAR'}
{'cca3': 'GBR', 'cca2': 'GB', 'name_common': 'United Kingdom', 'curr_iso': 'GBP'}
{'cca3': 'USA', 'cca2': 'US', 'name_common': 'United States of America', 'curr_iso': 'USD'}

API End Point:  list_countries filter currency=LSL (Lesotho loti)
Method:                 _list_countries_method
Url:                    http://localhost:8000/api/
Status                  200
{'cca3': 'LSO', 'cca2': 'LS', 'name_common': 'Lesotho', 'curr_iso': 'LSL'}

API End Point:  find_country filter cca3 = ZAF
Method:                 _find_country_method
Url:                    http://localhost:8000/api/
Status                  200
{'cca3': 'ZAF', 'cca2': 'ZA', 'name_common': 'South Africa'}

API End Point:  find_country filter cca3 = ZA
Method:                 _find_country_method
Url:                    http://localhost:8000/api/
Status                  200
{'cca3': 'ZAF', 'cca2': 'ZA', 'name_common': 'South Africa'}

{'cca3': 'AUS', 'cca2': 'AU', 'name_common': 'Australia', 'curr_iso': 'AUD'}
{'cca3': 'SWZ', 'cca2': 'SZ', 'name_common': 'Eswatini', 'curr_iso': 'ZAR'}
{'cca3': 'SWZ', 'cca2': 'SZ', 'name_common': 'Eswatini', 'curr_iso': 'SZL'}
{'cca3': 'DER', 'cca2': 'DE', 'name_common': 'Federal Republic of Germany', 'curr_iso': 'EUR'}
{'cca3': 'LSO', 'cca2': 'LS', 'name_common': 'Lesotho', 'curr_iso': 'ZAR'}
{'cca3': 'LSO', 'cca2': 'LS', 'name_common': 'Lesotho', 'curr_iso': 'LSL'}
{'cca3': 'ZAF', 'cca2': 'ZA', 'name_common': 'South Africa', 'curr_iso': 'ZAR'}
{'cca3': 'GBR', 'cca2': 'GB', 'name_common': 'United Kingdom', 'curr_iso': 'GBP'}
{'cca3': 'USA', 'cca2': 'US', 'name_common': 'United States of America', 'curr_iso': 'USD'}

API End Point:  delete_country where cca = DER
Method:                 _delete_country_method
Url:                    http://localhost:8000/api/
Status                  200
{'cca3': 'AUS', 'cca2': 'AU', 'name_common': 'Australia', 'curr_iso': 'AUD'}
{'cca3': 'SWZ', 'cca2': 'SZ', 'name_common': 'Eswatini', 'curr_iso': 'ZAR'}
{'cca3': 'SWZ', 'cca2': 'SZ', 'name_common': 'Eswatini', 'curr_iso': 'SZL'}
{'cca3': 'LSO', 'cca2': 'LS', 'name_common': 'Lesotho', 'curr_iso': 'ZAR'}
{'cca3': 'LSO', 'cca2': 'LS', 'name_common': 'Lesotho', 'curr_iso': 'LSL'}
{'cca3': 'ZAF', 'cca2': 'ZA', 'name_common': 'South Africa', 'curr_iso': 'ZAR'}
{'cca3': 'GBR', 'cca2': 'GB', 'name_common': 'United Kingdom', 'curr_iso': 'GBP'}
{'cca3': 'USA', 'cca2': 'US', 'name_common': 'United States of America', 'curr_iso': 'USD'}

{'cca3': 'AUS', 'cca2': 'AU', 'name_common': 'Australia', 'curr_iso': 'AUD'}
{'cca3': 'SWZ', 'cca2': 'SZ', 'name_common': 'Eswatini', 'curr_iso': 'ZAR'}
{'cca3': 'SWZ', 'cca2': 'SZ', 'name_common': 'Eswatini', 'curr_iso': 'SZL'}
{'cca3': 'LSO', 'cca2': 'LS', 'name_common': 'Lesotho', 'curr_iso': 'ZAR'}
{'cca3': 'LSO', 'cca2': 'LS', 'name_common': 'Lesotho', 'curr_iso': 'LSL'}
{'cca3': 'ZAF', 'cca2': 'ZA', 'name_common': 'South Africa', 'curr_iso': 'ZAR'}
{'cca3': 'GBR', 'cca2': 'GB', 'name_common': 'United Kingdom', 'curr_iso': 'GBP'}
{'cca3': 'USA', 'cca2': 'US', 'name_common': 'United States of America', 'curr_iso': 'USD'}

API End Point:  add_country where cca2 = DE, cca3 = DER, name_common = Germany
Method:                 _add_country_method
Url:                    http://localhost:8000/api/
Status                  200
{'cca3': 'AUS', 'cca2': 'AU', 'name_common': 'Australia', 'curr_iso': 'AUD'}
{'cca3': 'SWZ', 'cca2': 'SZ', 'name_common': 'Eswatini', 'curr_iso': 'ZAR'}
{'cca3': 'SWZ', 'cca2': 'SZ', 'name_common': 'Eswatini', 'curr_iso': 'SZL'}
{'cca3': 'DER', 'cca2': 'DE', 'name_common': 'Federal Republic of Germany', 'curr_iso': 'EUR'}
{'cca3': 'LSO', 'cca2': 'LS', 'name_common': 'Lesotho', 'curr_iso': 'ZAR'}
{'cca3': 'LSO', 'cca2': 'LS', 'name_common': 'Lesotho', 'curr_iso': 'LSL'}
{'cca3': 'ZAF', 'cca2': 'ZA', 'name_common': 'South Africa', 'curr_iso': 'ZAR'}
{'cca3': 'GBR', 'cca2': 'GB', 'name_common': 'United Kingdom', 'curr_iso': 'GBP'}
{'cca3': 'USA', 'cca2': 'US', 'name_common': 'United States of America', 'curr_iso': 'USD'}

9. Notes

   • The reahl unit wack the database i.e. the database will be empty after a unit test

   • Use the reahl demosetup to refresh the database

   • If you are using sqlite, you must stop the server before loading data into the database. Sqlite can only handle one connection at a time.

   • Stop the server whilst executing the unit tests. The unit test start its own server, but sqlite has a problem with multiple connections.

Testing

1. This project uses reahl unit to run execute pytest.

2. To run the tests

   • Make sure the server is stopped <ctrl-c>

$ cd ~
$ cd ./ProdigyHelmsman/
$ reahl unit
REAHLWORKSPACE environment variable not set, defaulting to /home/rtinstall
====================================================================================== test session starts =======================================================================================
platform win32 -- Python 3.8.7, pytest-6.2.5, py-1.11.0, pluggy-1.0.0
rootdir: d:\Dropbox\Projects\ProdigyHelmsman, configfile: setup.cfg
collected 8 items

tests\test_prodigyhelmsman.py .......<html data-reahl-rendered-state="" class="no-js">
<head>
<script>
          function switchJSStyle(d, fromStyle, toStyle) {
              var r=d.querySelectorAll("html")[0];
              r.className=r.className.replace(new RegExp("\\b" + fromStyle + "\\b", "g"),toStyle)
        };
        (function(d) { switchJSStyle(d, "no-js", "js"); })(document);
        </script><title>API</title>
<link rel="stylesheet" href="/static/reahl.css" type="text/css">
<link rel="stylesheet" href="/static/reahl.runningonbadge.css" type="text/css">
<meta charset="utf-8">
<meta name="viewport" content="width=device-width, initial-scale=1, shrink-to-fit=no">
<link rel="stylesheet" href="/static/bootstrap-4.5.3/css/bootstrap.css" type="text/css">
<link rel="stylesheet" href="/static/bootstrap-4.5.3/css/reahl-patch.css" type="text/css">
<link rel="stylesheet" href="/static/reahl.files.css" type="text/css">
<link rel="stylesheet" href="/static/reahl.carousel.css" type="text/css">
<link rel="stylesheet" href="/static/reahl.datatable.css" type="text/css">
</head>
<body>
<div id="_reahl_out_of_bound_container"></div>
<script type="text/javascript">
window.QUnit = true;
</script>

<script type="text/javascript" src="/static/jquery-3.5.1/jquery-3.5.1.js"></script>
<script type="text/javascript" src="/static/jquery/jquery.validate-1.19.3.modified.js"></script>
<script type="text/javascript" src="/static/jquery/jquery.ba-bbq-1.3pre.js"></script>
<script type="text/javascript" src="/static/jquery/jquery.blockUI-2.70.0.js"></script>
<script type="text/javascript" src="/static/jquery/jquery.form-4.3.0.js"></script>
<script id="reahl-jqueryready" type="text/javascript">
jQuery(document).ready(function($){
$('body').addClass('enhanced');

});
</script>

<script type="text/javascript" src="/static/js-cookie-2.2.1/js.cookie.js"></script>
<script type="text/javascript" src="/static/jquery-ui-1.12.1.custom/jquery-ui.js"></script>
<script type="text/javascript" src="/static/underscore-umd-min.1.13.1.js"></script><script>var underscore = _;</script>
<!--[if lt IE 9]>
<script type="text/javascript" src="/static/html5shiv-printshiv-3.7.3.js"></script><![endif]-->
<!--[if lte IE 9]>
<script type="text/javascript" src="/static/IE9.js"></script><![endif]-->
<script type="text/javascript" src="/static/reahl.hashchange.js"></script>
<script type="text/javascript" src="/static/reahl.ajaxlink.js"></script>
<script type="text/javascript" src="/static/reahl.primitiveinput.js"></script>
<script type="text/javascript" src="/static/reahl.textinput.js"></script>
<script type="text/javascript" src="/static/reahl.validate.js"></script>
<script type="text/javascript" src="/static/reahl.form.js"></script>
<script type="text/javascript" src="/static/holder-2.9.9.js"></script>
<script type="text/javascript" src="/static/popper-1.16.1/popper.js"></script>
<script type="text/javascript" src="/static/bootstrap-4.5.3/js/bootstrap.js"></script>
<script type="text/javascript" src="/static/reahl.bootstrapform.js"></script>
<script type="text/javascript" src="/static/reahl.pagination.js"></script>
<script type="text/javascript" src="/static/reahl.files.js"></script>
<script type="text/javascript" src="/static/reahl.bootstrappopupa.js"></script>
<script type="text/javascript" src="/static/reahl.bootstrapcueinput.js"></script>
<script type="text/javascript" src="/static/reahl.bootstrapfileuploadli.js"></script>
<script type="text/javascript" src="/static/reahl.bootstrapfileuploadpanel.js"></script>
</body>
<p>This is the ProdigyHelmsman API. Methods:</p>
<ul></ul>
<li><p>add_country [['post']]: /api/_add_country_method</p></li>
<li><p>delete_country [['post']]: /api/_delete_country_method</p></li>
<li><p>find_country [['get']]: /api/_find_country_method</p></li>
<li><p>list_countries [['get']]: /api/_list_countries_method</p></li>
<li><p>log_in [['post']]: /api/_log_in_method</p></li>
</html>

.

======================================================================================= 8 passed in 2.84s ========================================================================================

Connecting to www.prodigyhelmsman.co.za

The API server is currently active on www.prodigyhelmsman.co.za. To connect to www.prodigyhelmsman.co.za:

$ cd ~
$ cd ./ProdigyHelmsman/
$ python3 prodigyhelmsman/enquire_country.py 1