pybuc 0.30.0

Fast estimation of Bayesian structural time series models via Gibbs sampling.

pybuc

pybuc (Python Bayesian Unobserved Components) is a version of R's Bayesian structural time series package, bsts, written by Steven L. Scott. The source paper can be found here or in the papers directory of this repository. While there are plans to expand the feature set of pybuc, currently there is no roadmap for the release of new features. The syntax for using pybuc closely follows statsmodels' UnobservedComponents module.

The current version of pybuc includes the following options for modeling and forecasting a structural time series:

• Stochastic or non-stochastic level
• Damped level
• Stochastic or non-stochastic trend
• Damped trend ^*
• Multiple stochastic or non-stochastic periodic-lag seasonality
• Multiple damped periodic-lag seasonality
• Multiple stochastic or non-stochastic "dummy" seasonality
• Multiple stochastic or non-stochastic trigonometric seasonality
• Regression with static coefficients^**

^* pybuc dampens trend differently than bsts. The former assumes an AR(1) process without drift for the trend state equation. The latter assumes an AR(1) with drift. In practice this means that the trend, on average, will be zero with pybuc, whereas bsts allows for the mean trend to be non-zero. The reason for choosing an autoregressive process without drift is to be conservative with long horizon forecasts.

^** pybuc estimates regression coefficients differently than bsts. The former uses a standard Gaussian prior. The latter uses a Bernoulli-Gaussian mixture commonly known as the spike-and-slab prior. The main benefit of using a spike-and-slab prior is its promotion of coefficient-sparse solutions, i.e., variable selection, when the number of predictors in the regression component exceeds the number of observed data points.

Fast computation is achieved using Numba, a high performance just-in-time (JIT) compiler for Python.

Installation

pip install pybuc

See pyproject.toml and poetry.lock for dependency details. This module depends on NumPy, Numba, Pandas, and Matplotlib. Python 3.9 and above is supported.

Motivation

The Seasonal Autoregressive Integrated Moving Average (SARIMA) model is perhaps the most widely used class of statistical time series models. By design, these models can only operate on covariance-stationary time series. Consequently, if a time series exhibits non-stationarity (e.g., trend and/or seasonality), then the data first have to be stationarized. Transforming a non-stationary series to a stationary one usually requires taking local and/or seasonal time-differences of the data, but sometimes a linear trend to detrend a trend-stationary series is sufficient. Whether to stationarize the data and to what extent differencing is needed are things that need to be determined beforehand.

Once a stationary series is in hand, a SARIMA specification must be identified. Identifying the "right" SARIMA specification can be achieved algorithmically (e.g., see the Python package pmdarima) or through examination of a series' patterns. The latter typically involves statistical tests and visual inspection of a series' autocorrelation (ACF) and partial autocorrelation (PACF) functions. Ultimately, the necessary condition for stationarity requires statistical analysis before a model can be formulated. It also implies that the underlying trend and seasonality, if they exist, are eliminated in the process of generating a stationary series. Consequently, the underlying time components that characterize a series are not of empirical interest.

Another less commonly used class of model is structural time series (STS), also known as unobserved components (UC). Whereas SARIMA models abstract away from an explicit model for trend and seasonality, STS/UC models do not. Thus, it is possible to visualize the underlying components that characterize a time series using STS/UC. Moreover, it is relatively straightforward to test for phenomena like level shifts, also known as structural breaks, by statistical examination of a time series' estimated level component.

STS/UC models also have the flexibility to accommodate multiple stochastic seasonalities. SARIMA models, in contrast, can accommodate multiple seasonalities, but only one seasonality/periodicity can be treated as stochastic. For example, daily data may have day-of-week and week-of-year seasonality. Under a SARIMA model, only one of these seasonalities can be modeled as stochastic. The other seasonality will have to be modeled as deterministic, which amounts to creating and using a set of predictors that capture said seasonality. STS/UC models, on the other hand, can accommodate both seasonalities as stochastic by treating each as distinct, unobserved state variables.

With the above in mind, what follows is a comparison between statsmodels' SARIMAX' module, statsmodels' UnobservedComponents module, and pybuc. The distinction between statsmodels.UnobservedComponents and pybuc is the former is a maximum likelihood estimator (MLE) while the latter is a Bayesian estimator. The following code demonstrates the application of these methods on a data set that exhibits trend and multiplicative seasonality. The STS/UC specification for statsmodels.UnobservedComponents and pybuc includes stochastic level, stochastic trend (trend), and stochastic trigonometric seasonality with periodicity 12 and 6 harmonics.

Usage

Example: univariate time series with level, trend, and multiplicative seasonality

A canonical data set that exhibits trend and seasonality is the airline passenger data used in Box, G.E.P.; Jenkins, G.M.; and Reinsel, G.C. Time Series Analysis, Forecasting and Control. Series G, 1976. See plot below.

This data set gave rise to what is known as the "airline model", which is a SARIMA model with first-order local and seasonal differencing and first-order local and seasonal moving average representations. More compactly, SARIMA(0, 1, 1)(0, 1, 1) without drift.

To demonstrate the performance of the "airline model" on the airline passenger data, the data will be split into a training and test set. The former will include all observations up until the last twelve months of data, and the latter will include the last twelve months of data. See code below for model assessment.

Import libraries and prepare data

from pybuc import buc
import numpy as np
import pandas as pd
import matplotlib.pyplot as plt
from statsmodels.tsa.statespace.sarimax import SARIMAX
from statsmodels.tsa.statespace.structural import UnobservedComponents


# Convenience function for computing root mean squared error
def rmse(actual, prediction):
    act, pred = actual.flatten(), prediction.flatten()
    return np.sqrt(np.mean((act - pred) ** 2))


# Import airline passenger data
url = "https://raw.githubusercontent.com/devindg/pybuc/master/examples/data/airline-passengers.csv"
air = pd.read_csv(url, header=0, index_col=0)
air = air.astype(float)
air.index = pd.to_datetime(air.index)
hold_out_size = 12

# Create train and test sets
y_train = air.iloc[:-hold_out_size]
y_test = air.iloc[-hold_out_size:]

SARIMA

''' Fit the airline data using SARIMA(0,1,1)(0,1,1) '''
sarima = SARIMAX(
    y_train,
    order=(0, 1, 1),
    seasonal_order=(0, 1, 1, 12),
    trend=[0]
)
sarima_res = sarima.fit(disp=False)
print(sarima_res.summary())

# Plot in-sample fit against actuals
plt.plot(y_train)
plt.plot(sarima_res.fittedvalues)
plt.title('SARIMA: In-sample')
plt.xticks(rotation=45, ha="right")
plt.show()

# Get and plot forecast
sarima_forecast = sarima_res.get_forecast(hold_out_size).summary_frame(alpha=0.05)
plt.plot(y_test)
plt.plot(sarima_forecast['mean'])
plt.fill_between(sarima_forecast.index,
                 sarima_forecast['mean_ci_lower'],
                 sarima_forecast['mean_ci_upper'], alpha=0.4)
plt.title('SARIMA: Forecast')
plt.legend(['Actual', 'Mean', '95% Prediction Interval'])
plt.show()

# Print RMSE
print(f"SARIMA RMSE: {rmse(y_test.to_numpy(), sarima_forecast['mean'].to_numpy())}")

SARIMA RMSE: 21.09028021383853

The SARIMA(0, 1, 1)(0, 1, 1) forecast plot.

MLE Unobserved Components

''' Fit the airline data using MLE unobserved components '''
mle_uc = UnobservedComponents(
    y_train,
    exog=None,
    irregular=True,
    level=True,
    stochastic_level=True,
    trend=True,
    stochastic_trend=True,
    freq_seasonal=[{'period': 12, 'harmonics': 6}],
    stochastic_freq_seasonal=[True]
)

# Fit the model via maximum likelihood
mle_uc_res = mle_uc.fit(disp=False)
print(mle_uc_res.summary())

# Plot in-sample fit against actuals
plt.plot(y_train)
plt.plot(mle_uc_res.fittedvalues)
plt.title('MLE UC: In-sample')
plt.show()

# Plot time series components
mle_uc_res.plot_components(legend_loc='lower right', figsize=(15, 9), which='smoothed')
plt.show()

# Get and plot forecast
mle_uc_forecast = mle_uc_res.get_forecast(hold_out_size).summary_frame(alpha=0.05)
plt.plot(y_test)
plt.plot(mle_uc_forecast['mean'])
plt.fill_between(mle_uc_forecast.index,
                 mle_uc_forecast['mean_ci_lower'],
                 mle_uc_forecast['mean_ci_upper'], alpha=0.4)
plt.title('MLE UC: Forecast')
plt.legend(['Actual', 'Mean', '95% Prediction Interval'])
plt.show()

# Print RMSE
print(f"MLE UC RMSE: {rmse(y_test.to_numpy(), mle_uc_forecast['mean'].to_numpy())}")

MLE UC RMSE: 17.961873327622694

The MLE Unobserved Components forecast and component plots.

As noted above, a distinguishing feature of STS/UC models is their explicit modeling of trend and seasonality. This is illustrated with the components plot.

Finally, the Bayesian analog of the MLE STS/UC model is demonstrated. Default parameter values are used for the priors corresponding to the variance parameters in the model. See below for default priors on variance parameters.

Note that because computation is built on Numba, a JIT compiler, the first run of the code could take a while. Subsequent runs (assuming the Python kernel isn't restarted) should execute considerably faster.

Bayesian Unobserved Components

''' Fit the airline data using Bayesian unobserved components '''
bayes_uc = BayesianUnobservedComponents(
    response=y_train,
    level=True,
    stochastic_level=True,
    trend=True,
    stochastic_trend=True,
    trig_seasonal=((12, 0),),
    stochastic_trig_seasonal=(True,),
    seed=123
)
post = bayes_uc.sample(10000)
burn = 1000

# Print summary of estimated parameters
for key, value in bayes_uc.summary(burn=burn).items():
    print(key, ' : ', value)

# Plot in-sample fit against actuals
bayes_uc.plot_post_pred_dist(burn=burn)
plt.title('Bayesian UC: In-sample')
plt.show()

# Plot time series components
bayes_uc.plot_components(burn=burn, smoothed=False)
plt.show()

# Plot trace of posterior
bayes_uc.plot_trace(burn=burn)
plt.show()

# Get and plot forecast
forecast, _ = bayes_uc.forecast(
    num_periods=hold_out_size,
    burn=burn
)
forecast_mean = np.mean(forecast, axis=0)
forecast_l95 = np.quantile(forecast, 0.025, axis=0).flatten()
forecast_u95 = np.quantile(forecast, 0.975, axis=0).flatten()

plt.plot(y_test)
plt.plot(bayes_uc.future_time_index, forecast_mean)
plt.fill_between(bayes_uc.future_time_index, forecast_l95, forecast_u95, alpha=0.4)
plt.title('Bayesian UC: Forecast')
plt.legend(['Actual', 'Mean', '95% Prediction Interval'])
plt.show()

# Print RMSE
print(f"BAYES-UC RMSE: {rmse(y_test.to_numpy(), forecast_mean)}")

BAYES-UC RMSE: 17.6053345840511

The Bayesian Unobserved Components forecast plot, components plot, and RMSE are shown below.

Component plots

Smoothed

Filtered

Trace plots

Model

A structural time series model with level, trend, seasonal, and regression components takes the form:

$$ y_t = \mu_t + \boldsymbol{\gamma}^\prime _t \mathbb{1}_p + \mathbf x_t^\prime \boldsymbol{\beta} + \epsilon_t $$

where $\mu_t$ specifies an unobserved dynamic level component, $\boldsymbol{\gamma}_ t$ is a $p \times 1$ vector of unobserved dynamic seasonal components that represent unique periodicities, $\mathbf x_t^\prime \boldsymbol{\beta}$ a partially unobserved regression component (the regressors $\mathbf x_t$ are observed, but the coefficients $\boldsymbol{\beta}$ are not), and $\epsilon_t \sim N(0, \sigma_{\epsilon}^2)$ an unobserved irregular component. The equation describing the outcome $y_t$ is commonly referred to as the observation equation, and the transition equations governing the evolution of the unobserved states are known as the state equations.

Level and trend

The unobserved level evolves according to the following general transition equations:

$$ \begin{align} \mu_{t+1} &= \kappa \mu_t + \delta_t + \eta_{\mu, t} \ \delta_{t+1} &= \phi \delta_t + \eta_{\delta, t} \end{align} $$

where $\eta_{\mu, t} \sim N(0, \sigma_{\eta_\mu}^2)$ and $\eta_{\delta, t} \sim N(0, \sigma_{\eta_\delta}^2)$ for all $t$. The state equation for $\delta_t$ represents the local trend at time $t$.

The parameters $\kappa$ and $\phi$ represent autoregressive coefficients. In general, $\kappa$ and $\phi$ are expected to be in the interval $(-1, 1)$, which implies a stationary process. In practice, however, it is possible for either $\kappa$ or $\phi$ to be outside the unit circle, which implies an explosive process. While it is mathematically possible for an explosive process to be stationary, the implication of such a result implies that the future predicts the past, which is not a realistic assumption. If an autoregressive level or trend is specified, no hard constraints (by default) are placed on the bounds of the autoregressive parameters. Instead, the default prior for these parameters is vague (see section on priors below).

Note that if $\sigma_{\eta_\mu}^2 = \sigma_{\eta_\delta}^2 = 0$ and $\phi = 1$ and $\kappa = 1$, then the level component in the observation equation, $\mu_t$, collapses to a deterministic intercept and linear time trend.

Seasonality

Periodic-lag form

For a given periodicity $S$, a seasonal component in $\boldsymbol{\gamma}_t$, $\gamma^S_t$, can be modeled in three ways. One way is based on periodic lags. Formally, the seasonal effect on $y$ is modeled as

$$ \gamma^S_t = \rho(S) \gamma^S_{t-S} + \eta_{\gamma^S, t}, $$

where $S$ is the number of periods in a seasonal cycle, $\rho(S)$ is an autoregressive parameter expected to lie in the unit circle (-1, 1), and $\eta_{\gamma^S, t} \sim N(0, \sigma_{\eta_\gamma^S}^2)$ for all $t$. If damping is not specified for a given periodic lag, $\rho(S) = 1$ and seasonality is treated as a random walk process.

This specification for seasonality is arguably the most robust representation (relative to dummy and trigonometric) because its structural assumption on periodicity is the least complex.

Dummy form

Another way is known as the "dummy" variable approach. Formally, the seasonal effect on the outcome $y$ is modeled as

$$ \sum_{j=0}^{S-1} \gamma^S_{t-j} = \eta_{\gamma^S, t} \iff \gamma^S_t = -\sum_{j=1}^{S-1} \gamma^S_{t-j} + \eta_{\gamma^S, t}, $$

where $j$ indexes the number of periods in a seasonal cycle, and $\eta_{\gamma^S, t} \sim N(0, \sigma_{\eta_\gamma^S}^2)$ for all $t$. Intuitively, if a time series exhibits periodicity, then the sum of the periodic effects over a cycle should, on average, be zero.

Trigonometric form

The final way to model seasonality is through a trigonometric representation, which exploits the periodicity of sine and cosine functions. Specifically, seasonality is modeled as

$$ \gamma^S_t = \sum_{j=1}^h \gamma^S_{j, t} $$

where $j$ indexes the number of harmonics to represent seasonality of periodicity $S$ and $1 \leq h \leq \lfloor S/2 \rfloor$ is the highest desired number of harmonics. The state transition equations for each harmonic, $\gamma^S_{j, t}$, are represented by a real and imaginary part, specifically

$$ \begin{align} \gamma^S_ {j, t+1} &= \cos(\lambda_j) \gamma^S_{j, t} + \sin(\lambda_j) \gamma^{S*}_ {j, t} + \eta_{\gamma^S_ j, t} \ \gamma^{S*}_ {j, t+1} &= -\sin(\lambda_j) \gamma^S_ {j, t} + \cos(\lambda_j) \gamma^{S*}_ {j, t} + \eta_{\gamma^{S*}_ j , t} \end{align} $$

where frequency $\lambda_j = 2j\pi / S$. It is assumed that $\eta_{\gamma^S_j, t}$ and $\eta_{\gamma^{S*}_ j , t}$ are distributed $N(0, \sigma^2_{\eta^S_\gamma})$ for all $j, t$. Note that when $S$ is even, $\gamma^{S*}_ {S/2, t+1}$ is not needed since

$$ \begin{align} \gamma^S_{S/2, t+1} &= \cos(\pi) \gamma^S_{S/2, t} + \sin(\pi) \gamma^{S*}_ {S/2, t} + \eta_{\gamma^S_{S/2}, t} \ &= (-1) \gamma^S_{S/2, t} + (0) \gamma^{S*}_ {S/2, t} + \eta_{\gamma^S_{S/2}, t} \ &= -\gamma^S_{S/2, t} + \eta_{\gamma^S_{S/2}, t} \end{align} $$

Accordingly, if $S$ is even and $h = S/2$, then there will be $S - 1$ state equations. More generally, the number of state equations for a trigonometric specification is $2h$, except when $S$ is even and $h = S/2$.

Regression

There are two ways to configure the model matrices to account for a regression component with static coefficients. The canonical way (Method 1) is to append $\mathbf x_t^\prime$ to $\mathbf Z_t$ and $\boldsymbol{\beta}_t$ to the state vector, $\boldsymbol{\alpha}_t$ (see state space representation below), with the constraints $\boldsymbol{\beta}_0 = \boldsymbol{\beta}$ and $\boldsymbol{\beta}_t = \boldsymbol{\beta} _{t-1}$ for all $t$. Another, less common way (Method 2) is to append $\mathbf x_t^\prime \boldsymbol{\beta}$ to $\mathbf Z_t$ and 1 to the state vector.

While both methods can be accommodated by the Kalman filter, Method 1 is a direct extension of the Kalman filter as it maintains the observability of $\mathbf Z_t$ and treats the regression coefficients as unobserved states. Method 2 does not fit naturally into the conventional framework of the Kalman filter, but it offers the significant advantage of only increasing the size of the state vector by one. In contrast, Method 1 increases the size of the state vector by the size of $\boldsymbol{\beta}$. This is significant because computational complexity is quadratic in the size of the state vector but linear in the size of the observation vector.

The unobservability of $\mathbf Z_t$ under Method 2 can be handled with maximum likelihood or Bayesian estimation by working with the adjusted series

$$ y_t^* \equiv y_t - \tau_t = \mathbf x_ t^\prime \boldsymbol{\beta} + \epsilon_t $$

where $\tau_t$ represents the time series component of the structural time series model. For example, assuming a level and seasonal component are specified, this means an initial estimate of the time series component $\tau_t = \mu_t + \boldsymbol{\gamma}^\prime_ t \mathbb{1}_p$ and $\boldsymbol{\beta}$ has to be acquired first. Then $\boldsymbol{\beta}$ can be estimated conditional on $\mathbf y^ * \equiv \left(y_1^ *, y_2^ *, \cdots, y_n^ *\right)^\prime$.

pybuc uses Method 2 for estimating static coefficients.

Data transformations

Before sampling the posterior, data transformations can be applied. By default, if a regression component is specified, each predictor will be standardized (z-scored) and the response will be scaled by its sample standard deviation. If no regression component is specified, the response will not be scaled. Data transformations are managed with the scale_response and standardize_predictors arguments in thesample() method. The defaults are scale_response=None and standardize_predictors=True.

If any data transformation is performed, by default all posterior elements are back-transformed to their original form. Back-transformation can be managed with the back_transform argument in the sample() method. By default, back_transform=True.

Default priors

Irregular and state variances

The default prior for irregular variance is:

$$ \sigma^2_{\mathrm{irregular}} \sim \mathrm{IG}(0.01, (0.01 * \mathrm{Std.Dev}(y))^2) $$

If no priors are given for variances corresponding to stochastic states (i.e., level, trend, and seasonality), the following defaults are used:

$$ \begin{align} \sigma^2_{\mathrm{level}} &\sim \mathrm{IG}(0.01, (0.01 * \mathrm{Std.Dev}(y))^2) \ \sigma^2_{\mathrm{seasonal}} &\sim \mathrm{IG}(0.01, (0.01 * \mathrm{Std.Dev}(y))^2) \ \sigma^2_{\mathrm{trend}} &\sim \mathrm{IG}(0.01, (0.2 * 0.01 * \mathrm{Std.Dev}(y))^2) \ \end{align} $$

Priors for irregular, level, and seasonal variances match the defaults in R's bsts package. However, the default prior for trend variance is more conservative in pybuc. This is reflected by a standard deviation that is one-fifth the magnitude of the level standard deviation. The purpose is to mitigate the impact that noise in the data could have on producing an overly aggressive trend.

Note that the scale prior for trigonometric seasonality is automatically scaled by the number of state equations implied by the period and number of harmonics. For example, if the trigonometric seasonality scale prior passed to pybuc is 10 and the period and number of harmonics is 12 and 6, respectively, then the scale prior will be converted to $\frac{\mathrm{ScalePrior}}{\mathrm{NumStateEq}} = \frac{10}{(2 * 6 - 1)} = \frac{10}{11}$. The reason for this is that trigonometric seasonality is the sum of conditionally independent random harmonics, so the sum of harmonic variances must match the total variance reflected by the scale prior.

Damped/autoregressive state coefficients

Damping can be applied to level, trend, and periodic-lag seasonality state components. By default, if no prior is given for an autoregressive (i.e., AR(1)) coefficient, the prior takes the form

$$ \phi \sim N(1, 1) $$

where $\phi$ represents some autoregressive coefficient. Thus, the prior encodes the belief that the process (level, trend, seasonality) is a random walk. A unit variance is assumed to accommodate different types of dynamics, including stationary or explosive processes that may oscillate, grow, or decay.

Regression coefficients

The default prior for regression coefficients is

$$ \boldsymbol{\beta} \sim N\left(\mathbf 0, \frac{\kappa}{n} \left(\frac{1}{2} \mathbf X^\prime \mathbf X + \frac{1}{2} \mathrm{diag}(\mathbf X^\prime \mathbf X) \right)\right) $$

where $\mathbf X$ is the design matrix, $n$ is the number of response observations, and $\kappa = 0.000001$ is the number of default prior observations given to the mean prior of $\mathbf 0$. This prior is a slight modification of Zellner's g-prior (to guard against potential singularity of the design matrix). The number of prior observations, $\kappa$, can be changed by passing a value to the argument zellner_prior_obs in the sample() method. If Zellner's g-prior is not desired, then a custom precision matrix can be passed to the argument reg_coeff_prec_prior. Similarly, if a zero-mean prior is not wanted, a custom mean prior can be passed to reg_coeff_mean_prior.

State space representation (example)

The unobserved components model can be rewritten in state space form. For example, suppose level, trend, seasonal, regression, and irregular components are specified, and the seasonal component takes a trigonometric form with periodicity $S=4$ and $h=2$ harmonics. Let $\mathbf Z_t \in \mathbb{R}^{1 \times m}$, $\mathbf T \in \mathbb{R}^{m \times m}$, $\mathbf R \in \mathbb{R}^{m \times q}$, and $\boldsymbol{\alpha}_ t \in \mathbb{R}^{m \times 1}$ denote the observation matrix, state transition matrix, state error transformation matrix, and unobserved state vector, respectively, where $m$ is the number of state equations and $q$ is the number of state parameters to be estimated (i.e., the number of stochastic state equations, which is defined by the number of positive state variance parameters).

There are $m = 1 + 1 + (h * 2 - 1) + 1 = 6$ state equations and $q = 1 + 1 + (h * 2 - 1) = 5$ stochastic state equations , where the term $(h * 2 - 1)$ follows from $S=4$ being even and $h = S/2$. Outside of this case, there would generally be $h * 2$ state equations for trigonometric seasonality. Note also that there are 5 stochastic state equations because the state value for the regression component is not stochastic; it is 1 for all $t$ by construction. The observation, state transition, and state error transformation matrices may be written as

$$ \begin{align} \mathbf Z_t &= \left(\begin{array}{cc} 1 & 0 & 1 & 0 & 1 & \mathbf x_t^{\prime} \boldsymbol{\beta} \end{array}\right) \ \mathbf T &= \left(\begin{array}{cc} 1 & 1 & 0 & 0 & 0 & 0 \ 0 & 1 & 0 & 0 & 0 & 0 \ 0 & 0 & \cos(2\pi / 4) & \sin(2\pi / 4) & 0 & 0 \ 0 & 0 & -\sin(2\pi / 4) & \cos(2\pi / 4) & 0 & 0 \ 0 & 0 & 0 & 0 & -1 & 0 \ 0 & 0 & 0 & 0 & 0 & 1 \end{array}\right) \ \mathbf R &= \left(\begin{array}{cc} 1 & 0 & 0 & 0 & 0 \ 0 & 1 & 0 & 0 & 0 \ 0 & 0 & 1 & 0 & 0 \ 0 & 0 & 0 & 1 & 0 \ 0 & 0 & 0 & 0 & 1 \ 0 & 0 & 0 & 0 & 0 \end{array}\right) \end{align} $$

Given the definitions of $\mathbf Z_t$, $\mathbf T$, and $\mathbf R$, the state space representation of the unobserved components model above can compactly be expressed as

$$ \begin{align} y_t &= \mathbf Z_t \boldsymbol{\alpha}_ t + \epsilon_t \ \boldsymbol{\alpha}_ {t+1} &= \mathbf T \boldsymbol{\alpha}_ t + \mathbf R \boldsymbol{\eta}_ t, \hspace{5pt} t=1,2,...,n \end{align} $$

where

$$ \begin{align} \boldsymbol{\alpha}_ t &= \left(\begin{array}{cc} \mu_t & \delta_t & \gamma^4_{1, t} & \gamma^{4*}_ {1, t} & \gamma^4_{2, t} & 1 \end{array}\right)^\prime \ \boldsymbol{\eta}_ t &= \left(\begin{array}{cc} \eta_{\mu, t} & \eta_{\delta, t} & \eta_{\gamma^4_ 1, t} & \eta_{\gamma^{4*}_ 1, t} & \eta_{\gamma^4_ 2, t} \end{array}\right)^\prime \end{align} $$

and

$$ \mathrm{Cov}(\boldsymbol{\eta}_ t) = \mathrm{Cov}(\boldsymbol{\eta}_ {t-1}) = \boldsymbol{\Sigma}_ \eta = \mathrm{diag}(\sigma^2_{\eta_\mu}, \sigma^2_{\eta_\delta}, \sigma^2_{\eta_{\gamma^4_ 1}}, \sigma^2_{\eta_{\gamma^{4*}_ 1}}, \sigma^2_{\eta_{\gamma^4_ 2}}) \in \mathbb{R}^{5 \times 5} \hspace{5pt} \textrm{for all } t=1,2,...,n $$

Estimation

pybuc mirrors R's bsts with respect to estimation method. The observation vector, state vector, and regression coefficients are assumed to be conditionally normal random variables, and the error variances are assumed to be conditionally independent inverse-Gamma random variables. These model assumptions imply conditional conjugacy of the model's parameters. Consequently, a Gibbs sampler is used to sample from each parameter's posterior distribution.

To achieve fast sampling, pybuc follows bsts's adoption of the Durbin and Koopman (2002) simulation smoother. For any parameter $\theta$, let $\theta(s)$ denote the $s$-th sample of parameter $\theta$. Each sample $s$ is drawn by repeating the following four steps:

1. Draw $\boldsymbol{\alpha}(s)$ from $p(\boldsymbol{\alpha} | \mathbf y, \boldsymbol{\sigma}^2_\eta(s-1), \boldsymbol{\beta}(s-1), \sigma^2_\epsilon(s-1))$ using the Durbin and Koopman simulation state smoother, where $\boldsymbol{\alpha}(s) = (\boldsymbol{\alpha}_ 1(s), \boldsymbol{\alpha}_ 2(s), \cdots, \boldsymbol{\alpha}_ n(s))^\prime$ and $\boldsymbol{\sigma}^2_\eta(s-1) = \mathrm{diag}(\boldsymbol{\Sigma}_\eta(s-1))$. Note that pybuc implements a correction (based on a potential misunderstanding) for drawing $\boldsymbol{\alpha}(s)$ per "A note on implementing the Durbin and Koopman simulation smoother" (Marek Jarocinski, 2015).
2. Draw $\boldsymbol{\sigma}^2_ \eta(s)$ from $p(\boldsymbol{\sigma}^2 _\eta | \mathbf y, \boldsymbol{\alpha}(s))$ using Durbin and Koopman's simulation disturbance smoother.
3. Draw $\sigma^2_\epsilon(s)$ from $p(\sigma^2_\epsilon | \mathbf y^ *, \boldsymbol{\alpha}(s))$, where $\mathbf y^ *$ is defined above.
4. Draw $\boldsymbol{\beta}(s)$ from $p(\boldsymbol{\beta} | \mathbf y^ *, \boldsymbol{\alpha}(s), \sigma^2_\epsilon(s))$, where $\mathbf y^ *$ is defined above.

By assumption, the elements in $\boldsymbol{\sigma}^2_ \eta(s)$ are conditionally independent inverse-Gamma distributed random variables. Thus, Step 2 amounts to sampling each element in $\boldsymbol{\sigma}^2_ \eta(s)$ independently from their posterior inverse-Gamma distributions.