python-glinet 0.3.7

This package gives client access to the Gl-Inet json-rpc for firmware >=4.0

.. image:: https://img.shields.io/github/workflow/status/tomtana/python-glinet/Python%20package :target: https://github.com/tomtana/python-glinet/actions/workflows/python-package.yml .. image:: https://img.shields.io/pypi/pyversions/python-glinet :target: https://pypi.org/project/python-glinet .. image:: https://img.shields.io/pypi/v/python-glinet :target: https://pypi.org/project/python-glinet

python-glinet - A Python3 Client for GL.Inet Router

• This python client provides full access to the GL.Inet Luci API.
• Supported firmware versions: 4.0 onwards
• Dynamic method creation including docstring from the gl.inet online documentation
• Api responses are represented recursively as objects, such that you can access all properties via '.'
• Cache for api description and hashed login
• Configurable background thread to keep connection alive

.. image:: https://github.com/tomtana/python-glinet/raw/main/ressources/python_glinet_demo.gif

About

The original use case was to automatically generate and write nordvpn wireguard configs to my slate axt-1800 router, but then I found an elegant way to autogenerate methods for the whole api and python-glinet was born.

It should be noted that GL.Inet changed the api mechanism from REST to JSON-RPC with the introduction of the firmware 4.0. Therefore, older versions are not supported.

Also, there is no official documentation in English yet. The client parses the Chinese documentation from here <https://dev.gl-inet.cn/docs/api_docs_page>__ and dynamically creates the api methods. Once it is available, the repo will be updated.

The best way to navigate and explore the api is within an ipython shell. A wrapper for ipython and terminal is on the roadmap.

Installation

PiP

.. code-block:: sh

   pip install python-glinet

From Repo

.. code-block:: sh

#clone repository git clone https://github.com/tomtana/python-glinet.git cd python-glinet

Install package directly. The -e parameter lets you edit the files. If this is not needed to can also install without the -e parameter.

.. code-block:: sh

pip install -e .

Alternatively install it in an Python virtual environment (see here <https://docs.python.org/3/tutorial/venv.html>__ for more infos)

.. code-block:: sh

python3 -m venv venv source venv/bin/activate pip install -e .

Getting Started

Login

Login is as easy as shown below. Only in case you modified the router
default settings such as ip-address or username you need to pass them as
parameter (see the documentation of the GlInet class for more details).
The ``login`` method will ask you to input the password first time you
call it.

.. code:: python

   from pyglinet import GlInet
   glinet = GlInet()
   glinet.login()

..

   **Info:** With the default settings, the following tasks will be
   executed during init and login:

   -  try to load api reference from persistence, otherwise load it from
      the gl.inet online documentation
   -  if no password is passed as parameter in the constructor
   -  try to load from persistence (password stored as hash)
   -  if no success ask via prompt
   -  persist settings
   -  start background thread to keep connection alive

API Access Via Dynamically Created Client

First generate an api object.

.. code:: python

client = glinet.get_api_client()

General ^^^^^^^

• The api structure is as follow: client.<functionial_group>.
• Due to python naming rules for variables, all "-" are replaced with "_" for the api method construction. e.g. wg-client becomes wg_client.
• Use code completion and docstring to intuitively navigate the api

Functional Groups ^^^^^^^^^^^^^^^^^

Just call your client to see all available api function groups.

::

client

.. code:: bash

Out[11]: Function

repeater rs485 qos acl modem logread igmp custom_dns dns dlna nas_web adguardhome s2s samba switch_button diag rtty network upgrade reboot wg_server firewall ovpn_server vpn_policy fan system wg_client cable led ui netmode ddns ipv6 ovpn_client plugins tethering macclone lan edgerouter clients wifi cloud cloud_batch_manage

Methods ^^^^^^^

To explore the methods of a function group, just select it and hit enter.

.. code:: python

client.wg_client

.. code:: bash

Out[6]: Function

get_recommend_config get_third_config add_config set_config remove_config clear_config_list get_config_list start stop get_status check_config confirm_config add_group remove_group set_group get_group_list get_all_config_list set_proxy add_route set_route get_route_list remove_route

Parameters ^^^^^^^^^^

Select your method and press enter. A list for all possible parameters are printed. If a parameter is prepended with ?, it means it is optional.

.. code:: python

api.wg_client.set_config

.. code:: bash

Out[8]: Parameter Type Description

---

name string 节点名 address_v4 string 节点IPv4子网 ?address_v6 string 节点IPv6子网 private_key string 节点私钥 allowed_ips string 节点的allowedips end_point string 节点的endpoint public_key string 节点公钥 ?dns string 节点的dns ?preshared_key string 预分享密钥 ?ipv6_enable bool 是否启用IPv6 presharedkey_enable bool 是否使用预分享密钥 group_id number 组ID peer_id number 配置ID ?listen_port number 监听端口 ?persistent_keepalive number 节点保活 ?mtu number 节点的mtu

Docstring ^^^^^^^^^

You can also show the docstring by appending a ? to the method. It will show all the parameter and usage examples.

.. code:: python

api.wg_client.set_config?

.. code:: bash

Signature: api.wg_client.set_config(params=None) Type: GlInetApiCall File: ~/.local/lib/python3.10/site-packages/pyglinet/api_helper.py Docstring: Available parameters (?=optional): Parameter Type Description

---

name string 节点名 address_v4 string 节点IPv4子网 ?address_v6 string 节点IPv6子网 private_key string 节点私钥 allowed_ips string 节点的allowedips end_point string 节点的endpoint public_key string 节点公钥 ?dns string 节点的dns ?preshared_key string 预分享密钥 ?ipv6_enable bool 是否启用IPv6 presharedkey_enable bool 是否使用预分享密钥 group_id number 组ID peer_id number 配置ID ?listen_port number 监听端口 ?persistent_keepalive number 节点保活 ?mtu number 节点的mtu

Example request: {"jsonrpc":"2.0","method":"call","params":["","wg-client","set_config",{"group_id":3212,"peer_id":1254,"name":"test","address_v4":"10.8.0.0/24","address_v6":"fd00:db8:0:123::/64","private_key":"XVpIdr+oYjTcgDwzSZmNa1nSsk8JO+tx1NBo17LDBAI=","allowed_ips":"0.0.0.0/0,::/0","end_point":"103.231.88.18:3102","public_key":"zv0p34WZN7p2vIgehwe33QF27ExjChrPUisk481JHU0=","dns":"193.138.219.228","presharedkey_enable":false,"listen_port":22536,"persistent_keepalive":25,"mtu":1420,"ipv6_enable":true}],"id":1}

Example response: {"jsonrpc": "2.0", "id": 1, "result": {}}

Method call ^^^^^^^^^^^

Just call the method as usual. Check the usage examples to understand how parameters need to be passed.

::

client.wg_client.get_all_config_list()

.. code:: bash

Out[12]: {'name': 'wg_client__get_all_config_list', 'config_list': [{'name': 'wg_client__get_all_config_list', 'username': '', 'group_name': 'AzireVPN', 'peers': [], 'password': '', 'auth_type': 1, 'group_id': 9690}]}

API Response Processing ^^^^^^^^^^^^^^^^^^^^^^^

The API json responses are recursively converted into objects. This provides convenient access with code completion and point access to the data.

API Access Via Manual Requests

Instead of using the dynamically created api_client, it is also possible
to use the ``GlInet`` instance to make api requests. In fact, the
api_client uses the same mechanism.

Once logged in, you simply can use the
``glinet.request(method, params)`` method to access or retrieve data
from the api. Information about the method and the parameters can either
be found in the
`documentation <https://dev.gl-inet.cn/docs/api_docs_page>`__ or via the
api_client.

e.g.

::

   glinet.request("call", ["adguardhome", "get_config"])

.. code:: bash

   Out[12]: {'name': 'adguardhome__get_config', 'id': 13, 'jsonrpc': '2.0', 'result': {'name': 'adguardhome__get_config', 'enabled': False}}

is equivalent to

::

   api_client.adguardhome.get_config()

.. code:: bash

   Out[13]: {'name': 'adguardhome__get_config', 'enabled': False}

..

   **Note:** the output of the ``request`` method returns the whole
   response body whereas the api_client just returns the result.


Roadmap
-------


V1.0.0
~~~~~~

-  ☒ Add dynamically docstring for API calls
-  ☒ Create pip compliant package
-  ☒ Publish pip package
-  ☒ Add tests
-  ☒ Improve documentation
-  ☐ Increase test coverage


V2.0.0
~~~~~~

-  ☐ Add wrapper for execution via terminal
-  ☐ ...