python-u2flib-host 2.0.1

UNKNOWN

== u2flib-host ==
Provides library functionality for communicating with a U2F device over USB.

Two executables are provided, u2f-register and u2f-authenticate, which support
the register and authenticated commands of U2F as defined in the FIDO
specifications, available here: http://fidoalliance.org/specifications/download

=== License ===
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.

This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.

=== Installation ===
u2flib-host is installable by running the following command:

# python setup.py install

Under Linux you will need to add a Udev rule to be able to access the U2F
device, or run as root. For example, the Udev rule may contain the following:

#Udev rule for allowing HID access to Yubico devices for U2F support.

KERNEL=="hidraw*", SUBSYSTEM=="hidraw", \
MODE="0664", GROUP="plugdev", ATTRS{idVendor}=="1050"

=== Dependencies ===
To support HID devices, u2flib-host uses hidapi, which has a few dependencies
for building. On a Debian based system, run the following command before
installation (python setup.py install):

# apt-get install build-essential python-dev cython libusb-1.0-0-dev \
libudev-dev

The soft U2F device implementation requires M2Crypto. On Debian based systems
it is easiest installed using:

# apt-get-install python-m2crypto

=== Examples ===
==== Library use ====

----
from u2flib_host import u2f, exc

# Enumerate available devices
devices = u2f.list_devices()

for device in devices:
# The with block ensures that the device is opened and closed.
with device as dev:
# Register the device with some service
registrationResponse = u2f.register(device, registrationRequest, facet)
----

==== Executable use ====
The examples below use the soft U2F device to register and authenticate against
the u2f_server example server from the python-u2flib-server project. See that
project for more details.
The register step will create a new U2F key pair and store the credential in
the soft_device.json file. The authenticate step will use this credential to
sign a challenge given by the server.

===== Registration =====
The u2f-register command takes a RegisterRequest JSON object as input,
registering the attached device and returns the registration response as
output.

----
$ u2f-register -s soft_device.json http://localhost:8081
Enter RegisterRequest JSON data...
{"challenge": "K0aDxsacDNqrzlaGyLZoFYbXvCJcdIhq0SSaMz-lsV4", "version": "U2F_V2", "appId": "http://localhost:8081"}

Touch the U2F device you wish to register...
[{"clientData": "eyJvcmlnaW4iOiAiaHR0cDovL2xvY2FsaG9zdDo4MDgxIiwgImNoYWxsZW5nZSI6ICJLMGFEeHNhY0ROcXJ6bGFHeUxab0ZZYlh2Q0pjZElocTBTU2FNei1sc1Y0IiwgInR5cCI6ICJuYXZpZ2F0b3IuaWQuZmluaXNoRW5yb2xsbWVudCJ9", "registrationData": "BQTGnJVILHhzuTKg2XClCM5TJjF2WeK4fp9i6fj3VywzOk3d-O1sNaapAUPh-1GxoVCMY6s_jimP-nKqnZT-MGOCQIGD9Hs4qBCXMbfOPfzuB5zhFcOD95ddve67HXV8QeyPDKPZS5zDogvWyl8l4Tv2XRWGo4_6cAPPM4dPZcMreagwggGHMIIBLqADAgECAgkAmb7osQyi7BwwCQYHKoZIzj0EATAhMR8wHQYDVQQDDBZZdWJpY28gVTJGIFNvZnQgRGV2aWNlMB4XDTEzMDcxNzE0MjEwM1oXDTE2MDcxNjE0MjEwM1owITEfMB0GA1UEAwwWWXViaWNvIFUyRiBTb2Z0IERldmljZTBZMBMGByqGSM49AgEGCCqGSM49AwEHA0IABDvhl91zfpg9n7DeCedcQ8gGXUnemiXoi-JEAxz-EIhkVsMPAyzhtJZ4V3CqMZ-MOUgICt2aMxacMX9cIa8dgS2jUDBOMB0GA1UdDgQWBBQNqL-TV04iaO6mS5tjGE6ShfexnjAfBgNVHSMEGDAWgBQNqL-TV04iaO6mS5tjGE6ShfexnjAMBgNVHRMEBTADAQH_MAkGByqGSM49BAEDSAAwRQIgXJWZdbvOWdhVaG7IJtn44o21Kmi8EHsDk4cAfnZ0r38CIQD6ZPi3Pl4lXxbY7BXFyrpkiOvCpdyNdLLYbSTbvIBQOTBEAiBk3N3-gH2WPhR7EOq2-vEqrC1EZXgYs7fofhYTNk9jqwIgcAVRCeXfCLfLO7X71vKVeXaRQKCJgvmRZdB8PoPVdjw"}]
----

===== Authentication =====
The u2f-authenticate command takes an AuthenticateRequest JSON object as
input, and returns the AuthenticateResponse as output.

----
$ u2f-authenticate -s soft_device.json http://localhost:8081
Enter AuthenticateRequest JSON data...
{"keyHandle": "gYP0ezioEJcxt849_O4HnOEVw4P3l1297rsddXxB7I8Mo9lLnMOiC9bKXyXhO_ZdFYajj_pwA88zh09lwyt5qA", "challenge": "zCfLJtWyaCk86Awi5VFtT7hhLk5yncYppYC0z2Q5xxo", "version": "U2F_V2", "appId": "http://localhost:8081"}

{"clientData": "eyJvcmlnaW4iOiAiaHR0cDovL2xvY2FsaG9zdDo4MDgxIiwgImNoYWxsZW5nZSI6ICJ6Q2ZMSnRXeWFDazg2QXdpNVZGdFQ3aGhMazV5bmNZcHBZQzB6MlE1eHhvIiwgInR5cCI6ICJuYXZpZ2F0b3IuaWQuZ2V0QXNzZXJ0aW9uIn0", "challenge": "zCfLJtWyaCk86Awi5VFtT7hhLk5yncYppYC0z2Q5xxo", "keyHandle": "gYP0ezioEJcxt849_O4HnOEVw4P3l1297rsddXxB7I8Mo9lLnMOiC9bKXyXhO_ZdFYajj_pwA88zh09lwyt5qA", "signatureData": "AQAAAAEwRAIgK8HLGu8SQNPC3hI1700RsTtyXLlsn9_1sEcIcobhDi0CIFzduJ5IdGus-I-ieHTX1R-1xRCA0e29I9kChKbkkIzF"}
----