Skip to main content

Version Coverage Status Python License

QCut

QCut is a quantum circuit knitting package built on top of qiskit for performing gate cuts and resetless wire cuts allowing simulation of larger quantum circuits on smaller quantum devices or simulators at the cost of a circuit overhead. QCut has been designed and tested to work with IQM's qpus, and the Finnish Quantum Computing Infrastructure (FiQCI).

QCut has been built at CSC - IT Center for Science (Finnish IT Center for Science).

Check out jooniv.github.io/QCut/ for documentation and more examples.

Installation

For installation a UNIX-like system is currently needed due to pymetis being used for automatic cut finding. On Windows use WSL

Pip:
Installation should be done via uv

uv pip install QCut
#or
uv add QCut

If using other than the default Qiskit version (newest) it is recommended to install Qiskit first before installing QCut.

Uv can be installed with

#Linux / mac
curl -LsSf https://astral.sh/uv/install.sh | sh

Note: for drawing circuits you might have to install pylatexenc. This can also be done with uv.

uv pip install pylatexenc
#or
uv add pylatexenc

Install from source
It is also possible to use QCut by cloning this repository and including it in your project folder.

cd QCut
uv pip install .
#or
uv sync --no-dev

#or with dev deps
uv sync

Usage

Manual Usage

1: Import needed packages

import QCut as ck
from QCut import cut, cutGate
from qiskit import QuantumCircuit, transpile
from qiskit.circuit.library import CXGate
from qiskit.quantum_info import SparsePauliOp
from qiskit.circuit.library import CXGate
from qiskit_aer import AerSimulator
from qiskit.primitives import StatevectorEstimator, BackendEstimatorV2 as BackendEstimator
from iqm.qiskit_iqm import IQMFakeAdonis

2: Start by defining a QuantumCircuit just like in Qiskit

circuit  =  QuantumCircuit(4)

mult = 1.635
circuit.r(mult*0.46262, mult*0.1446, 0)
circuit.cx(0,1)
circuit.cx(1,2)
circuit.cx(2,3)
   
circuit.draw("mpl")

3: Insert cut operations to the circuit to denote where we want to cut the circuit

Note that here we don't insert any measurements. Measurements will be automatically handled by QCut.

from qiskit.circuit.library import CXGate

cut_circuit = QuantumCircuit(4)

mult = 1.635
cut_circuit.r(mult*0.46262, mult*0.1446, 0)
cut_circuit.append(**cutGate(CXGate(), 0, 1)) 
cut_circuit.append(cut(), [1])
cut_circuit.cx(1,2)
cut_circuit.cx(2,3)

cut_circuit.decompose(gates_to_decompose=["CutGate"]).draw("mpl")

Note that currently QCut only supports cutting Cz gates so cut gates get transpiled down to CutCZ gates (hence the added H gates)

4: Extract cut locations from cut_circuit and split it into independent subcircuit.

cut_circuit = ck.get_locations_and_subcircuits(cut_circuit)

Now we can draw our subcircuits.

cut_circuit.subcircuits[0].draw("mpl")

cut_circuit.subcircuits[1].draw("mpl")

cut_circuit.subcircuits[2].draw("mpl")

5 Define backend and transpile the cut circuit

fake = IQMFakeAdonis() #noisy
sim = AerSimulator() #ideal
transpiled = ck.transpile_subcircuits(cut_circuit, fake, optimization_level=3)

6: Generate experiment circuits

observables = SparsePauliOp(["IIIZ", "IIZI", "IZII", "IIZZ"])

cut_experiment = ck.get_experiment_circuits(transpiled, observables)

Note that both CutCircuit and CutExperiment classes implement the assing_parameters() function of Qiskit.QuantumCircuit

7: Run the experiment circuits

results = ck.run_experiments(cut_experiment, backend=fake)

8: Define observables and calculate expectation values

expectation_values = ck.estimate_expectation_values(results, cut_experiment.expv_data())

9: Finally calculate the exact and noisy expectation values of the original circuit and compare them to the results calculated with QCut

obs = [ob.to_label() for ob in observables.paulis]

estimator = Estimator()
exact_expvals = [e.data.evs for e in
    estimator.run([(x) for x in zip([circuit] * len(obs), obs)]).result()
]


tr = transpile(circuit, backend=fake)

tr_obs = observables.apply_layout(tr.layout)

tr_obs_separate = [
    SparsePauliOp(pauli.to_label()) for pauli in tr_obs.paulis
]

fake_estimator = BackendEstimator(backend=fake)
exps = [e.data.evs for e in
    fake_estimator.run([(x) for x in zip([tr] * len(tr_obs_separate), tr_obs_separate)]).result()
]
import numpy as np

np.set_printoptions(formatter={"float": lambda x: f"{x:0.6f}"})

print(f"QCut expectation values:{np.array(expectation_values)}")
print(f"Noisy expectation values with fake backend:{np.array(exps)}")
print(f"Exact expectation values with ideal simulator :{np.array(exact_expvals)}")

QCut expectation values:[0.704039 0.615275 0.554269 0.808868]

Noisy expectation values with fake backend:[0.587891 0.669922 0.500000 0.777344]

Exact expectation values with ideal simulator :[0.727323 0.727323 0.727323 1.000000]

As we can see QCut is able to accurately reconstruct the expectation values and be more accurate that just using the fake backend as is. (Note that since this is a probabilistic method the results vary a bit each run)

Additionally we can execute QCut using the ideal Aer simulator and see that we get (practically) exact results:

QCut expectation values:[0.699436 0.713172 0.713172 0.979377]

Usage shorthand

For convenience, it is not necessary to go through each of the aforementioned steps individually. Instead, QCut provides a function run() that executes the whole wire-cutting sequence.

The same example can then be run like this:

sim = AerSimulator()
observables = SparsePauliOp(["IIIZ", "IIZI", "IZII", "IIZZ"])

estimated_expectation_values = ck.run(cut_circuit, observables, sim)

Automatic cuts

QCut comes with functionality for automatically finding good cut locations that can place both wire and gate cuts.

from QCut import find_cuts

cut_circuit = find_cuts(circuit , 3, cuts="both")

estimated_expectation_values = ck.run_cut_circuit(cut_circuit, observables, sim)

np.set_printoptions(formatter={"float": lambda x: f"{x:0.6f}"})

print(f"QCut expectation values:{np.array(estimated_expectation_values)}")
print(f"Exact expectation values with ideal simulator :{np.array(exact_expvals)}")

QCut expectation values:[0.699436 0.713172 0.713172 0.979377]

Exact expectation values with ideal simulator :[0.727323 0.727323 0.727323 1.000000]

Running on IQM fake backends

To use QCut with IQM's fake backends it is required to install Qiskit IQM for Qiskit <= 1.2 or IQM client for Qiskit > 1.2.

Installation can be doen via uv:

uv pip install qiskit-iqm==17.8

or

uv pip install iqm-client[qiskit]

After installation just import the backend you want to use:

from iqm.qiskit_iqm import IQMFakeAdonis
backend = IQMFakeAdonis()

Running on FiQCI

For running on real hardware using the Lumi supercomputer follow the instructions here. If you are used to using Qiskit on jupyter notebooks it is recommended to use the Lumi web interface.

Running on other hardware

Running on other providers such as IBM is untested at the moment but as long as the hardware can be accessed with Qiskit QCut should be compatible.

Documentation

Check out jooniv.github.io/QCut/ for documentation and more examples.

The docs are built with sphinx using the sphinx book theme. To build the docs:

cd docs
uv pip install -r requirements-docs.txt
sphinx-build -v -b html . build/sphinx/html -W

HTML files can then be found under build/sphinx/html/

Acknowledgements

This project is built on top of Qiskit which is licensed under the Apache 2.0 license.

License

Apache 2.0 license

Metadata

Release files for QCut 1.1.1

For a detailed explanation of source distributions (sdists) and built distributions (wheels), please see the package formats documentation.

Source distribution (sdist)

Source distribution for QCut 1.1.1
File Size Uploaded Provenance Actions
qcut-1.1.1.tar.gz 595.3 kB With provenance Details for qcut-1.1.1.tar.gz

Built distribution (wheel)

Table of built distributions (wheels) for QCut 1.1.1
File Interpreter ABI Platform Actions
qcut-1.1.1-py3-none-any.whl Python 3 none any Details for qcut-1.1.1-py3-none-any.whl

Total release size: 1.1 MB

Release files / qcut-1.1.1.tar.gz

Download URL qcut-1.1.1.tar.gz
Size 595.3 kB
Tags Source
SHA-256 checksum
How to use checksums
87f994d227da125c026a735d78ce35673eadebc288774efa4f2f82f2a7066853
BLAKE2b-256 checksum
How to use checksums
7e902eb80c94f4a7144e45b79ed73e6e30e36b00e865e4c8dfabe5544c4aaa08
Upload date
Uploaded using Trusted Publishing?
What is trusted publishing?
Yes
Uploaded via twine/6.1.0 CPython/3.13.7

Provenance

Provenance describes where a file came from. On PyPI, provenance is shared via attestations, which provide a verifiable record of the build or publishing details. View details, limitations and caveats.

PyPI Publish Attestation

PyPI verified that this artifact, at this checksum, originated from the publisher listed below.

Signed by GitHub Actions, verified by PyPI on Mar 13, 2026.

Transparency log

Release files / qcut-1.1.1-py3-none-any.whl

Download URL qcut-1.1.1-py3-none-any.whl
Size 510.1 kB
Tags Python 3
SHA-256 checksum
How to use checksums
1de23e012a99fe87ef3a832018bb95e4c9cb8d0d1a2aef240015814220235320
BLAKE2b-256 checksum
How to use checksums
4088028450fee76c023d0f48bfbde421f9f5c0330dc7defc5d9bc0f1b7d6d94d
Upload date
Uploaded using Trusted Publishing?
What is trusted publishing?
Yes
Uploaded via twine/6.1.0 CPython/3.13.7

Provenance

Provenance describes where a file came from. On PyPI, provenance is shared via attestations, which provide a verifiable record of the build or publishing details. View details, limitations and caveats.

PyPI Publish Attestation

PyPI verified that this artifact, at this checksum, originated from the publisher listed below.

Signed by GitHub Actions, verified by PyPI on Mar 13, 2026.

Transparency log

Security for QCut 1.1.1

Provenance

Provenance describes where a file came from. On PyPI, provenance is shared via attestations, which provide a verifiable record of the build or publishing details. View details, limitations and caveats.

Full provenance

Both files in this release have been uploaded with provenance metadata.

Select from 2 files

Attestation for qcut-1.1.1.tar.gz

PyPI Publish Attestation

PyPI verified that this artifact, at this checksum, originated from the publisher listed below.

Signed by GitHub Actions, verified by PyPI on Mar 13, 2026.

Transparency log

A note on package security

PyPI is a repository for distributing packages, not a service for auditing them. While third-party security researchers and our staff do their best to detect and remove malicious packages, PyPI cannot guarantee the quality, security or suitability of any given package.

To learn more about protecting yourself from malicious actors, visit our package security documentation.

Release history Release notifications | RSS feed

This release

1.1.1 This release

2 release files Full provenance

Anthropic, PBC Visionary sponsor Bloomberg Visionary sponsor Hudson River Trading Visionary sponsor Meta Visionary sponsor NVIDIA Visionary sponsor Microsoft Sustainability sponsor Depot Continuous Integration AWS Cloud computing and Security Sponsor Datadog Monitoring Fastly CDN Google Download Analytics Sentry Error logging StatusPage Status page