salt-finder-charts 0.3.6

Generate finder charts for the Southern African Large Telescope (SALT)

SALT Finder Charts

Generate finder charts for the Southern African Large Telescope (SALT).

This package will change...

This is a preliminary and rudimentary version, and you should expect major changes in future versions.

Installation

The package can be installed with pip.

pip install salt_finder_charts

Usage

You can generate finder charts with the standard_finder_chart function. This returns a generator of binary streams containing the finder charts. For example, this is how you would generate finder charts for a longslit observation of an 18th magnitude target.

import astropy.units as u
from salt_finder_charts import standard_finder_charts
from salt_finder_charts.mode import Mode
from salt_finder_charts.output import OutputFormat

fcs = standard_finder_charts(
    bandpass="V",
    dec=-27.63792 * u.deg,
    max_magnitude=18,
    min_magnitude=18,
    mode=Mode.LONGSLIT,
    output_format=OutputFormat.PDF,
    position_angle=0 * u.deg,
    ra=78.6568723 * u.deg,
    slitwidth=2 * u.arcsec,
    title="Test Finding Chart"
)

Why a generator? Isn't there a single finder chart only? Usually that's true. However, in case of an asteroid you may get multiple finder charts, in particular if the considered time interval covers multiple nights.

Saving the generated finder charts to disk is fairly straightforward.

counter = 1
for fc in fcs:
    with open(f"FindingChart-{counter}.pdf", "wb") as f:
        f.write(fc.read())
        counter += 1

If you are certain there is only one finder chart, you could just use next() to get it.

fc = next(fcs)

Here is how you could view finder charts for an asteroid. Note that both the pytz and the Pillow library must have been installed, and that you have to hit enter for moving to the next finder chart.

from datetime import datetime
from PIL import Image

import pytz
import astropy.units as u
from salt_finder_charts import standard_finder_charts
from salt_finder_charts.mode import Mode
from salt_finder_charts.output import OutputFormat

utc = pytz.timezone("UTC")
start = utc.localize(datetime(2019, 6, 28, 11, 31, 0))
end = utc.localize(datetime(2019, 6, 29, 12, 31, 0))

for fc in standard_finder_charts(
    mode=Mode.IMAGING,
    horizons_id='54827',
    start_time=start,
    end_time=end,
    slitwidth=2 * u.arcsec,
    basic_annotations=False,
    output_format=OutputFormat.PNG
):
    image = Image.open(fc)
    image.show()
    input('Press enter to continue')
    image.close()

The standard_finder_charts function accepts the following arguments.

Argument	Description	Default
bandpass	Bandpass for the magnitudes, such as V.
basic_annotations	Whether to add basic annotations only.	False
dec	Declination of the finder chart center, as an angle between -90 and 90 degrees.
end_time	End time until which to generate finder charts. This is only relevant for non-sidereal targets. Must be timezone-aware.	End of the current Julian day
horizons_id	Identifier for the Horizons service.
horizons_stepsize	Time between ephemerides queried from the Horizons service	5 minutes
max_magnitude	Maximum magnitude
min_magnitude	Minimum magnitude for the target.
mode	Observation mode, such as imaging or longslit.
mos_mask_rsmt	Binary stream containing an RSMT MOS mask definition file.
output_format	Output format of the generated finder charts, such as PDF.	OutputFormat.PDF
position_angle	Position angle.	Generally 0° or, if appropriate, chosen to allow for easier acquisition.
ra	Right ascension of the finder chart center, as an angle between 0 and 360 degrees.
slitwidth	Slit width, as an angle.
start_time	Start time from which to generate finder charts. This is only relevant for non-sidereal targets.	Start of the current Julian day. Must be timezone-aware.
survey	Survey from which to get the finder chart image.	Survey.POSS2UKSTU_RED
title	Title of the finder chart.

Which of these arguments are required depends on the combination of arguments used. Also, some arguments may be ignored when used with others. For example, the slit width won;t be used if the observing mode is imaging.

While normally you wouldn't have to use it, the salt_finder_charts package also offers a finder_charts function which lets you customise some aspects of the finder chart generation.

For example, you could create the same longslit observation finder charts as above with the following code.

import astropy.units as u
from salt_finder_charts import finder_charts
from salt_finder_charts.ephemerides import ConstantEphemerisService
from salt_finder_charts.image import SurveyImageService, Survey
from salt_finder_charts.mode import LongslitModeDetails
from salt_finder_charts.output import output_pdf
from salt_finder_charts.util import MagnitudeRange

magnitude_range = MagnitudeRange(bandpass="V", max_magnitude=18, min_magnitude=18)
ephemeris_service = ConstantEphemerisService(
    ra=78.6568723 * u.deg,
    dec=-27.63792 * u.deg,
    magnitude_range=magnitude_range
)
image_service = SurveyImageService(Survey.POSS2UKSTU_RED)
mode_details = LongslitModeDetails(slitwidth=2 * u.arcsec, pa=0 * u.deg)
fcs = finder_charts(
    ephemeris_service=ephemeris_service,
    image_service=image_service,
    mode_details=mode_details,
    output=output_pdf,
    title="test Finding Chart"
)

Like the standard_finder_charts function, finder_charts returns a generator of binary streams with the finder charts. It uses the following arguments.

Argument	Description	Default
basic_annotations	Whether to add basic annotations only.	False
end_time	End time until which to generate finder charts. This is only relevant for non-sidereal targets. Must be timezone-aware.	End of the current Julian day
ephemeris_service	Service for getting ephemerides.
image_service	Service for getting finder chart images.
mode_details	Observing mode and its details
output	Function for converting a finding chart into an output format such as pdf.
start_time	Start time from which to generate finder charts. This is only relevant for non-sidereal targets. Must be timezone-aware.	Start of the current Julian day.
title	Title for the finder chart.

Command-line interface for generating finder charts

For convenience, a command saltfc is provided, which you can run in a terminal. It saves the generated finding charts in a directory. The filename of the generated files consists of a basename (such as FinderChart) followed by a dash and a running number. The basename can be customised with a command line option. Existing files are replaced without warning,

For example, you can generate finder charts for an asteroid by running the following command in a terminal.

saltfc \
    --output-dir /tmp \
    --basename "Asteroid_54827" \
    --mode imaging \
    --horizons-id 54827 \
    --start-time "2019-06-28 11:31:00" \
    --end-time "2019-06-29 12:31:00" \
    --output-format PDF

The command line options for saltfc are essentially the same as the arguments for the standard_finder_charts function, plus options for customising the file base name and setting the output directory.

Argument	Description	Default
--bandpass	Bandpass for the magnitudes, such as V.
--basename	Basename for the saved finder chart files	FinderChart
--basic_annotations	Add basic annotations only.	False
--dec	Declination of the finder chart center, as an angle between -90 and 90 degrees, in degrees.
--end_time	End time until which to generate finder charts. This is only relevant for non-sidereal targets. The time is supposed to be in UTC.	End of the current Julian day
--horizons_id	Identifier for the Horizons service.
--horizons_stepsize	Minutes between ephemerides queried from the Horizons service	5
--max_magnitude	Maximum magnitude for the target
--min_magnitude	Minimum magnitude for the target.
--mode	Observation mode, such as imaging or longslit.
--mos_mask_rsmt	RSMT MOS mask file
--output-dir	Directory where to store the generated finder chart files.
--output_format	Output format of the generated finder charts, such as PDF.	PDF
--position_angle	Position angle, in degrees.	Generally 0 or, if appropriate, chosen to allow for easier acquisition.
--ra	Right ascension of the finder chart center, as an angle between 0 and 360 degrees, in degrees.
--slitwidth	Slit width, as an angle in arcseconds.
--start_time	Start time from which to generate finder charts. This is only relevant for non-sidereal targets.	Start of the current Julian day. The time is supposed to be in UTC.
--survey	Survey from which to get the finder chart image.	Survey.POSS2UKSTU_RED
--title	Title of the finder chart.

Both the start and end time use the format yyyy-mm-dd hh:mm:ss. For example, valid values are 2019-01-25 9:45:16' or 2020-01-02 12:00:00.

Command interface for calculating position angles

A suitable position angle for a target can be calculated with the pa command. It tries to find a star in an annulus around the target with a magnitude in a given magnitude range. The stsr must have a given minimum separation from its neighbouring stars.

The radii, magnitudes and minimum separation all have default values, and usually you should not have to specify them. Hence a typical call of pa looks as follows./

pa --ra 217.524 --dec -23.97611

Here is a list of the available arguments for pa.

Argument	Description	Default
--dec	Declination of the target, in degrees.
--max-mag	Maximum (faintest) magnitude a suitable star may have.	18
--max-radius	Maximum radius, in arcminutes, of the annulus in which the suitable stars are located. "	3
--min-mag	Minimum (brightest) magnitude a suitable star may have.	15
--min-radius	Minimum radius of the annulus in which the suitable stars are located.	1
--min-separation	Minimum angular distance, in arcseconds, a suitable star must have from its neighbouring stars.	10