spid-sp-test 1.2.17

SAML2 SPID/CIE Service Provider validation tool that can be run from the command line

spid-sp-test

spid-sp-test is a SAML2 SPID/CIE Service Provider validation tool that can be executed from the command line. This tool was born by separating the test library already present in spid-saml-check.

Summary

• Features
• Setup
• Overview
• Examples
• Common usages
• Docker
• Unit tests
• Authors
• References

Features

spid-sp-test can:

• test a SAML2 SPID/CIE Metadata file or http url
• test a SAML2 SPID/CIE AuthnRequest file or or http url
• test a SAML2 eIDAS FICEP SP Metadata file or http url
• test many kinds of SPID SP, see Profiles
• test ACS behaviour, how a SP replies to a SAML2 Response
• dump the responses sent to an ACS and the HTML of the SP response
• handle Attributes to send in Responses or test configurations of the Responses via json configuration files
• configure response template with Jinja2
• get new test-suite via multiple json files
• fully integrable in CI
• export a detailed report in json format, in stdout or in a file

Generally it's:

• extremely faster in execution time than spid-saml-check
• extremely easy to setup

Check metadata

Authentication requests, JSON output

Full test set with metadata, authn request and responses

Profiles

Each profile loads a set of test. Use --profile $profile-name with one of the following profile name:

• saml2-sp: Pure SAML2 SP with some best practises
• spid-sp-public: Public Spid SP
• spid-sp-private: Private Spid SP
• spid-sp-ag-public-full: Public Spid SP Aggregatore Full
• spid-sp-ag-public-lite: Public Spid SP Aggregatore Lite
• spid-sp-ag-private-full: Private Spid SP Aggregatore Full
• spid-sp-ag-private-lite: Private Spid SP Aggregatore Lite
• spid-sp-op-public-full: Public Spid SP Gestore Full
• spid-sp-op-public-lite: Public Spid SP Gestore Lite
• cie-sp-public: Public CIE SP
• cie-sp-private: Private CIE SP
• ficep-eidas-sp: eIDAS FICEP SP

Warning: the support for Aggregatore and Gestore doesn't cover the x.509 certificates. Spid-sp-test uses spid-compliant-certificates-python for the validation of the certificates.

Setup

Prerequisite

• LibXML2
• xmlsec with openssl engine support
• python3
• pip for automated installation with Python packages manager

Setup in Debian like distro with virtual env

# install prerequisite
apt install libxml2-dev libxmlsec1-dev libxmlsec1-openssl xmlsec1 python3-pip python3-virtualenv
# initialize virtual env
virtualenv -p python3 env
source env/bin/activate

# install spid-sp-test 
pip install spid-sp-test --upgrade --no-cache

Overview

spid-sp-test can test a SP metadata file, you just have to give the Metadata URL, if http/http or file, eg: file://path/to/metadata.xml. At the same way it can test an Authentication Request.

In a different manner spid-sp-test can send a huge numer of fake SAML Response, for each of them it needs to trigger a real Authentication Request to the target SP.

If you want to test also the Response, you must give the spid-sp-test fake idp metadata xml file to the target SP. Get fake IdP metadata (--idp-metadata) and copy it to your SP metadatastore folder.

spid_sp_test --idp-metadata > /path/to/spid-django/example/spid_config/metadata/spid-sp-test.xml

To get spid-sp-test in a CI you have to:

• configure an example project in your application
• register the spid-sp-test fake idp metadata in your SP and execute the example project, with its development server in background
• launch the spid-sp-test commands

An example of CI is here

Examples

Run spid_sp_test -h for inline documentation.

usage: spid_sp_test [-h] [--metadata-url METADATA_URL] [--idp-metadata] [-l [LIST [LIST ...]]] [--extra] [--authn-url AUTHN_URL] [-tr] [-nsr] [-tp TEMPLATE_PATH] [-tn [TEST_NAMES [TEST_NAMES ...]]]
                    [-tj [TEST_JSONS [TEST_JSONS ...]]] [-aj ATTR_JSON] [-o REPORT_OUTPUT_FILE] [-rf {json,html}] [-d {CRITICAL,ERROR,WARNING,INFO,DEBUG}] [-xp XMLSEC_PATH] [--production]
                    [--response-html-dumps RESPONSE_HTML_DUMPS] [--exit-zero]
                    [-pr {saml2-sp,spid-sp-public,spid-sp-private,spid-sp-ag-public-full,spid-sp-ag-public-lite,spid-sp-op-public-full,spid-sp-op-public-lite,cie-sp-public,cie-sp-private,ficep-eidas-sp}]
                    [-ap AUTHN_PLUGIN] [-rm REQUEST_METHOD] [-rb REQUEST_BODY] [-rct REQUEST_CONTENT_TYPE] [-prs] [-pas] [--xsds-files-path XSDS_FILES_PATH] [-v]


src/spid_sp_test/spid_sp_test -h for help

Test metadata passing a file

spid_sp_test --metadata-url file://metadata.xml

Test metadata from a URL

spid_sp_test --metadata-url http://localhost:8000/spid/metadata

A quite standard test

spid_sp_test --metadata-url http://localhost:8000/spid/metadata --authn-url http://localhost:8000/spid/login/?idp=http://localhost:8088 --extra

Print only ERRORs

spid_sp_test --metadata-url http://localhost:8000/spid/metadata --authn-url http://localhost:8000/spid/login/?idp=https://localhost:8080 --extra --debug ERROR

JSON report, add -o filename.json to write to a file, -rf html -o html_report/ to export to a HTML page

spid_sp_test --metadata-url http://localhost:8000/spid/metadata --authn-url http://localhost:8000/spid/login/?idp=https://localhost:8080 --extra -rf json

Given a metadata file and a authn file (see tests/metadata and tests/authn for example) export all the test response without sending them to SP:

spid_sp_test --metadata-url file://tests/metadata/spid-django-other.xml --authn-url file://tests/authn/spid_django_post.html --extra --debug ERROR -tr -nsr

Get the response (test 1) that would have to be sent to a SP with a custom set of attributes, without sending it for real. It will just print it to stdout

spid_sp_test --metadata-url file://tests/metadata/spid-django-other.xml --authn-url file://tests/authn/spid_django_post.html --extra --debug ERROR -tr -nsr -tn 1 -aj tests/example.attributes.json

Common usages

Test a Shibboleth SP with a SAMLDS (DiscoveryService). In this example target points to the target service and entityID is the selected IdP. This example works also a Shibboleth IdP-SP proxy/gateway.

spid_sp_test --metadata-url https://sp.testunical.it/pymetadata_signed.xml --authn-url "https://sp.testunical.it/Shibboleth.sso/Login?target=https://sp.testunical.it/secure/index.php&entityID=https://localhost:8080" --debug ERROR --extra -tr

Test Satosa-Saml2Spid using its authn plugin and a SP that supports idp hinting

spid_sp_test --metadata-url https://localhost:10000/spidSaml2/metadata --authn-url "http://localhost:8000/saml2/login/?idp=https://localhost:10000/Saml2IDP/metadata&next=/saml2/echo_attributes&idphint=https%253A%252F%252Flocalhost%253A8080" -ap spid_sp_test.plugins.authn_request.SatosaSaml2Spid --extra -tr

Test Responses and html dumps

By enabling the response dump with the --response-html-dumps HTML_PATH option, you will get N html files (page of your SP) as follows:

• test description, commented
• SAML Response sent, commented
• SP html page, with absolute src and href (god bless lxml)

Here an example of 1_True.html, where 1 is the test name and True is the status.

Extending the tests

spid-sp-test offers the possibility to extend and configure new response tests to be performed. The user can:

• customize the test suite to run by configuring a json file similar to tests/example.test-suite.json and passing this as an argument with --test-jsons option. More than one json file can be entered by separating it by a space

• customize the attributes to be returned by configuring these in a json file similar to example/example.attributes.json and passing this with the --attr-json option

• customize xml templates to be used in tests, indicating them in each test entry in the configuration file configured via --test-jsons and also the templates directory with the option --template-path. The templates are Jinja2 powered, so it's possible to extend src/spid_sp_test/responses/templates/base.xml with our preferred values

• customize the way to get the SAML2 Authn Request, using plugins wrote by your own. If you're using a IAM Proxy with some OAuth2/OIDC frontends of a custom API, you can write your plugin and use it in the cli arguments, eg: spid_sp_test --metadata-url https://localhost:8000/spid/metadata --extra --authn-url https://localhost:8000/spid/login/?idp=https://localhost:8080 --debug INFO -tr --authn-plugin spid_sp_test.plugins.authn_request.Dummy

• customize entityid and certificates path runtime, using ENV variables. The files MUST be named private.key and public.cert:

  IDP_ENTITYID=https://your.idp.eid/ IDP_CERT_PATH=../spid-django/example/certificates spid_sp_test --idp-metadata
  

Looking at src/spid_sp_test/responses/settings.py or tests/example.test-suite.json we found that every test have a response attribute. Each element configured in would overload the value that will be rendered in the template. Each template can load these variable from its template context or use which ones was statically defined in it.

Finally you have batteries included and some options as well, at your taste.

Docker

Before starting you have to obtain the italia/spid-sp-test image. You can pull it from Docker Hub

$ docker pull ghcr.io/italia/spid-sp-test:latest

or build locally

$ docker build --tag italia/spid-sp-test:latest .

The container working directory is set to /spid therefore, local files should be mounted relatively to /spid path.

$ docker run -ti --rm \
    -v "$(pwd)/tests/metadata:/spid/mymetadata:ro" \
    -v "$(pwd)/tests/metadata:/spid/dumps:rw" \
    italia/spid-sp-test:v1.1.5 --metadata-url file://mymetadata/spid-django-other.xml

Unit tests

That's for developers.

pip install requirements-dev.txt
pytest -v --cov=spid_sp_test --cov-report term  tests/

If you need a docker, you can do:

1. create the developer image

docker build -f Dockerfile-devenv --no-cache . --tag italia/spid-sp-test-devenv

2. run coverage tests on the development image

docker run italia/spid-sp-test-devenv

3. if you need to use the image as a developer machine or inspect the enviroment, you can access in it with

docker run -it --entrypoint /bin/bash italia/spid-sp-test-devenv

4. The final step is a live coding from your host machine and the development docker instance, using volumes

docker run -it -v $(pwd):/tmp/src --entrypoint /bin/bash italia/spid-sp-test-devenv

Authors

• Giuseppe De Marco
• Paolo Smiraglia
• Michele D'Amico

References

TLS/SSL tests

• https://github.com/nabla-c0d3/sslyze

  pip install --upgrade sslyze
  sslyze www.that-sp.org --json_out ssl.log
  

• https://testssl.sh/