throttle-cli 0.2.0

Throttle commands triggered from multiple async sources.

Throttle

A small client-server utility, that throttles commands sent to it from multiple async sources.

Features:

• if receiving multiple instances of an already running command, only one other instance will be executed, after the current one finishes, by running each command in it's own process
• allows chaining commands, each command in the chain is still correctly throttled
• repeats failed commands in configurable intervals
• configurable notification callback for failed commands
• configuration allows handling spammed notifications from flaky commands (e.g because of flaky networks)
• regex based on the fly rewrite of commands

Social

Development and support happens on sourcehut, but there's a mirror on github for convenience and discoverability. You can also star there to show your interest/appreciation.

Rationale

Although throttle doesn't care what you want to run with it, it was written to solve issue's I had with syncing my email properly. It resolves the following problems I had:

• Correct, on-demand, responsive syncing of a mail account with mbsync: Instead of running mbsync account-inbox every X seconds (a waste of resources), I trigger the command via hooks in aerc whenever I make an operation in my inbox, or via goimapnotify when something changes on the server. Sync mbsync locks the folder it operates on, running multiple instances of mbsync account-inbox could leave you with a half-synced state. Practical example is receiving 10 emails in a short time: that's 10 triggers from goimapnotify, but only the first couple of emails will be synced. goimapnotify's wait setting sacrifices responsiveness and still doesn't guarantee a correctly synced state.

• Remapping aerc hooks running mbsync $AERC_ACCOUNT-$AERC_FOLDER to the correct mbsync channel.

• Every sync operation with mbsync needs to be followed up by a notmuch new, but notmuch also locks when running, which could lead to inconsistency between a maildir and a notmuch view of my emails. Chaining them via throttle makes sure notmuch new is executed after each mbsync operation, but only as much as actually needed.

• Executing notify-send in sync scripts after every failure was annoying to set up and quite spammy when connections got flaky (which is always when resuming from a sleep). Those executions were also "lost". Throttle will retry and can be configured to only send a notification on the second failure, which in practice has removed the spam alltogether.

Getting started

Install with

pipx install git+https://git.sr.ht/~ferdinandyb/throttle

Start server with

throttle --server

And send a command to the server (via unix socket):

throttle mbsync inbox

throttle should now run mbsync inbox for you. If you spam the above command a couple of hundred times before the first one finishes, throttle will queue up a single other instance of mbsync inbox after the first one finished.

Usage

usage: throttle [-h] [-s | -j JOB] [-J SILENT_JOB] [-k] [-o ORIGIN] [--LOGLEVEL {DEBUG,INFO,WARNING,ERROR,CRITICAL}]

options:
  -h, --help            show this help message and exit
  -s, --server          Start server.
  -j JOB, --job JOB     Explicitly give job to execute, can be given multiple times, in that case, they will be run consecutively.
  -J SILENT_JOB, --silent-job SILENT_JOB
                        Same as --job, but no notifications will be sent on failure.
  -k, --kill            Kill a previously started job.
  -o ORIGIN, --origin ORIGIN
                        Set the origin of the message, which might be useful in tracking logs.
  --LOGLEVEL {DEBUG,INFO,WARNING,ERROR,CRITICAL}
                        Set loglevel.

First start a server with throttle --server. It will log to $XDG_STATE/throttle/throttle.log, which should default to ~/.local/state/throttle/throttle.log.

To start a job run throttle my command which will run my command. You can make it explicit by running throttle --job "my command". Multiple --job flags will execute the command successively. Any dangling parameters will be scooped up for a last command so

throttle hello --job "my command" world

is equivalent to

throttle --job "my command" --job "hello world"

although you probably should not do this. Anyhow, this will first execute my command and if it succeeds, it will run then run hello world. When running multiple commands, they are executed serially.

If one throttle --job "hello world" errors out and you don't want it to run indefinitely, you can stop it alltogether by throttle --kill --job "hello world". Note, that this does not save you from restarting it with throttle --job "hello world" again.

Practical usage of a multiple commands would be something like:

throttle --job "mbsync personal-inbox" --job "notmuch new"

The silent jobs can be used to check for prerequisite of commands. E.g. after moving a message locally one might run:

throttle \
  --job "notmuch new" \
  --silent-job "testinternetconnection" \
  --job "mbsync personal-inbox" \
  --job "notmuch new"

This first syncs the notmuch database locally, then checks for internet connectivity (see this for an example), which will silently continue to be checked until internet is back, then after internet is back, sync the local folder with the server and finally run notmuch again to include the changes pulled from the server.

Configuration

Configuration happens in $XDG_CONFIG/throttle/config.toml.

Example config:

task_timeout = 30
retry_sequence = [5,15,30,60,120,300,900]
notification_cmd = 'notify-send --urgency={urgency} --app-name="throttle" "{job} ({origin})" "({errcode}): {msg}"'

notify_on_counter = 2
job_timeout = 600

[[filters]]
pattern = '^sleep \d$'
substitute = "sleep 10"

[[filters]]
pattern = '^sleep \d\d'
substitute = "sleep 15"

[[filters]]
pattern = '^mbsync (\w+)-(?!(inbox|archive|sent|drafts)$).+'
substitute = 'mbsync \1-folders'

• task_timeout: how long to wait before cleaning up a process with no more incoming commands (probably no need to change this)
• retry_sequence: list of seconds to successively wait if a command fails (e.g. no internet connection), the last element is retried in perpetuity
• notification_cmd: in case of a command failure, this command is called. See below for template keys
• notify_on_counter: how many failures before a notification should be sent
• job_timeout: how many seconds to let a job run, before timeouting it
• filters: each filters section defines a specific transformation, the first matching one is applied. pattern is checked against the command and if it matches, replaced by substitute using regex substitution (python re.sub({pattern},{substitute},{input}) is used). In case of multiple commands in one call, it is done per command separately.

Key that can be used in notification_cmd:

• job: a job (single --job)
• urgency: this is always "urgent" for now
• errcode: errorcode if it exists (set to -1000 if error code was not returned)
• msg: usually stderr of subprocess

Troubleshooting

pinentry on frequent gpg access

If the command you are running requires gpg, and after multiple commands you are being asked for a pinentry, although normally your gpg key is unlocked, you need to add something like this to gpg-agent.conf:

auto-expand-secmem 100

executables not found when started with systemd

Systemd can load PATH from many places, including some that are not available immediately on startup. The easiest way to solve this is using environment.d, but you might need to make sure that your file comes after environment when sorted alphabetically. See here for a bit more detail.

Contributing and issues

Please send patches to ~ferdinandyb/[e-mail] (see https://git-send-email.io/ on how to do that). You can set up your repository by running:

git config format.subjectPrefix "PATCH throttle"
git config sendemail.to "~ferdinandyb/[e-mail]"
git config format.notes true
git config notes.rewriteRef refs/notes/commits
git config notes.rewriteMode concatenate

You can also send questions to this list (note, that list.sr.ht does not delivier emails with attachments or text/html parts, see https://useplaintext.email/ on setting up your client for sending only in text/plain). Open tickets on https://todo.sr.ht/~ferdinandyb/throttle.

Considering the amount of interaction I expect, I will also not bite for github PR-s and github issues, but my preferences are the above.