titta 2.0.5

Titta is a toolbox for using eye trackers from Tobii with Python, specifically offering integration with PsychoPy.

Titta is a toolbox for using eye trackers from Tobii Pro AB with Python, specifically offering integration with PsychoPy. A Matlab version that integrates with PsychToolbox is also available from https://github.com/dcnieho/Titta. For a similar toolbox for SMI eye trackers, please see www.github.com/marcus-nystrom/SMITE.

Titta is an alternative to using the eye tracking functionality already available in PsychoPy (through ioHub). Instead of the general interface ioHub provides to many eye trackers, Titta is specifically designed to offer full access to the functionality of Tobii eye trackers, has an intuitive participant setup and calibration interface, and includes scripts for analysis of eye-tracking data.

Cite as: Niehorster, D.C., Andersson, R. & Nystrom, M. (2020). Titta: A toolbox for creating PsychToolbox and Psychopy experiments with Tobii eye trackers. Behavior Research Methods. doi: 10.3758/s13428-020-01358-8

For questions, bug reports or to check for updates, please visit https://github.com/marcus-nystrom/Titta.

To minimize the risk of missing samples, the current repository uses TittaPy (pip install TittaPy), a C++ wrapper around the Tobii SDK, to pull samples made available from the eye tracker.

To get started

If you know what you are doing, install Titta using: pip install titta or python -m pip install titta.

If you use a standalone PsychoPy installation, do the following steps:

1. Go to C:\Program Files\PsychoPy (or wherever you installed PsychoPy) and open a command prompt in the same folder as where you find python.exe (should be the main PsychoPy install folder). So the command prompt you have should start with something like C:\Program Files\PsychoPy>
2. Here you can then pip-install titta, by issuing a command like python -m pip install titta --upgrade.

Then run read_me.py from the 'demos' folder (first change the monitor settings and the eye tracker name in read_me.py). Reading through read_me.py should provide a good starting point for most users of Titta.

To get started with the Tobii Pro Lab integration

1. Open read_read_me_TalkToProLab.py in PsychoPy.
2. Download Tobii Pro Lab
3. Open a new External Presenter Project in Pro Lab. The Project name must be the same as the project name in read_read_me_TalkToProLab.py.
4. In PsychoPy, run read_read_me_TalkToProLab.py (first change the monitor settings and the eye tracker name).

Tested on Windows 10 using PsychoPy 2022.1.3 using Python 3.8. Ideally, make sure that the eye tracker is detected and works in the Tobii Eye Tracker Manager before trying to use it with Titta.

Contents

The toolbox consists of two main parts:

The Titta.Connect and Tobii.MyTobii classes

The Titta module (which utilizes the Tobii module) is the main workhorse of this toolbox, providing a wrapper around the Tobii Pro SDK, and a convenient graphical user interface (rendered through PsychoPy) for participant setup, calibration and validation. Only the Titta.calibrate() participant setup and calibration interface requires PsychoPy.

These modules connect to Tobii via TittaPy. Although TittaPy is located in a separate repository, documentation for it is included here since it is powering the Titta and Tobii modules here.

The TalkToProLab class

The TalkToProLab class provides an implementation of Tobii Pro Lab's External Presenter interface, allowing experiments to be created and run from Python with PsychoPy or other presentation methods, while recording, project management, recording playback/visualization and analysis can be performed in Tobii Pro Lab.

Usage

As demonstrated in the demo scripts, the toolbox is configured through the following interface:

1. Retrieve (default) settings for eye tracker of interest: settings = Titta.getDefaults('tracker model name'); Supported eye trackers and their corresponding model names in the Tobii Pro SDK/Titta are:

   Eye tracker	Model name
   Tobii Pro Spectrum	Tobii Pro Spectrum
   Tobii Pro Fusion	Tobii Pro Fusion
   Tobii Pro TX300	Tobii TX300
   Tobii Pro T60 XL	Tobii T60 XL
   Tobii Pro Nano	Tobii Pro Nano
   Tobii Pro Spark	Tobii Pro Spark
   Tobii Pro X3-120	Tobii Pro X3-120 or Tobii Pro X3-120 EPU
   Tobii Pro X2-60	X2-60_Compact
   Tobii Pro X2-30	X2-30_Compact
   Tobii Pro X60	Tobii X60
   Tobii Pro X120	Tobii X120
   Tobii Pro T60	Tobii T60
   Tobii Pro T120	Tobii T120
   Tobii 4C (Upgrade Key required)	IS4_Large_Peripheral

   Eye trackers marked in bold font have been tested. Note that the VR eye trackers are not supported by Titta. Also note that the Tobii 4C cannot be used for research purposes without buying the Pro Upgrade Key, and is compatible with Titta only after this purchase. Unfortunately, the Pro Upgrade Key is no longer sold by Tobii.

2. Change settings from their defaults if wanted.

3. Create a Titta instance using this settings struct: tracker = Titta(settings);

4. Interact with the eye tracker using the Titta API.

5. When calling Titta.calibrate(), a participant setup and calibration interface is shown. For each screen, several keyboard hotkeys are available to activate certain functionality. By default, the hotkey for each button is printed in the button's label.

API

Titta module

Module-level functions

The below method can be called on the Titta module directly.

Call	Inputs	Outputs	Description
get_defaults()	et_name: one of the supported eye tracker model names, see above	settings: object with all supported settings for a specific model of eyeTracker	Gets all supported settings with defaulted values for the indicated eyeTracker, can be modified and used for constructing an instance of Titta. See the supported options section below.

Construction

An instance of Titta for interaction with the eye tracker (a Titta.MyTobii instance) is constructed by calling the module-level constructor Titta.Connect() with either the name of a specific supported eye tracker model (in which case default settings for this model will be used) or with a settings struct retrieved from Titta.get_defaults(), possibly with changed settings (passing the settings object unchanged is equivalent to using the eye tracker model name as input argument).

Supported options

The get_defaults() method call returns the appropriate set of options for the indicated eye tracker.

Option name	Explanation
settings.SAMPLING_RATE	Sampling frequency

Tobii module

Properties

The following methods are available for an instance of Tobii.MyTobii (as created by calling Titta.Connect).

Property

Description

buffer

Initialized by call to init(). Returns handle to a TittaPy instance for interaction with the eye tracker's data streams. This handle can furthermore be used for directly interacting with the eye tracker through the Tobii Pro SDK, but note that this is at your own risk. Titta should have minimal assumptions about eye-tracker state, but I cannot guarantee that direct interaction with the eye tracker does not interfere with later use of Titta in the same session.

Methods

The following methods are available for an instance of Tobii.MyTobii (as created by calling Titta.Connect).

Call	Inputs	Outputs	Description
init()			Connect to the Tobii eye tracker and initialize it according to the requested settings (provided optionally when calling Titta.Connect()).
calibrate()	win: PsychoPy window object win_operator: (optional) PsychoPy window object for the operator's screen eye: (optional) 'left', 'right' or 'both'. Default: 'both'. calibration_number: (optional) used to indicate if we need to wait for another calibration i.e. if 'first', then will not exit until 'second' calibration has finished. Default: 'second'		Do participant setup, calibration and validation.
start_recording()	gaze: (optional) Default: false. time_sync: (optional) Default: false. eye_image: (optional) Default: false. notifications: (optional) Default: false. external_signal: (optional) Default: false. positioning: (optional) Default: false.		Begin recording the specified kind of data. If none of the input parameters are set to true, then this method does nothing.
stop_recording()	gaze: (optional) Default: false. time_sync: (optional) Default: false. eye_image: (optional) Default: false. notifications: (optional) Default: false. external_signal: (optional) Default: false. positioning: (optional) Default: false.		Stop recording the specified kind of data. If none of the input parameters are set to true, then this method does nothing.
send_message()	msg: Message to be written into data file ts: (optional) timestamp of the message (in seconds, will be stored as microseconds)		Store timestamped message
save_data()	filename: (optional) filename (including path) where HDF5 container will be stored append_version: (optional) boolean indicating whether version numbers (_1, _2, etc) will automatically get appended to the filename if the destination file already exists. Default: True		Save data to HDF5 container at specified location
calibration_history()		all_validation_results: a list, where each list entry contains the accuracy values in degrees from 0. left eye x, 1. left eye y, 2. right eye x, and 3. right eye y. The last entry [4] tells whether the calibration was used (1) or not used (0).	Get the calibration history thus far.
system_info()		A dictionary containing all the information included in TittaPy's properties, plus python_version, psychopy_version, TittaPy_version, and titta_version.	Get information about the system and connected eye tracker.
get_system_time_stamp()		An int64 scalar denoting Tobii system time in microseconds.	Get the current system time through the Tobii Pro SDK.
set_sample_rate()	Fs: the desired frequency value		Set the sampling rate of the connected eye tracker (if it is a supported frequency).
get_sample_rate()		frequency: the current frequency value	Get the sampling rate of the connected eye tracker.

TittaPy class

The TittaPy class can be used for interaction with the eye tracker's data streams. It is accessed via Tobii.MyTobii's buffer property. For instance, if tracker is your Tobii.MyTobii instance, then you can retrieve the recorded samples using tracker.buffer.consume_N(). The TittaPy methods and properties are documented in the TittaPy repository.

TalkToProLab class

Construction

An instance of TalkToProLab is constructed by calling TalkToProLab() and optionally providing two constructor arguments:

• project_name: (optional) the name of the External Presenter project that should be opened in Pro Lab
• dummy_mode: (optional) a bool indicating whether to run in dummy mode. Default: false.

Methods

The following method calls are available on a TalkToProLab instance. The majority of return types are the response dictionary, containing the operation name, the status code, and however many useful variables relevant to this operation. The status codes are as follows:
0: 'Operation successful',
100: 'Bad request',
101: 'Invalid parameter',
102: 'Operation was unsuccessful',
103: 'Operation cannot be executed in current state',
104: 'Access to the service is forbidden',
105: 'Authorization during connection to a service has not been provided',
201: 'Recording finalization failed'.

Call	Inputs	Outputs	Description
add_participant()	participant_name: name of the participant	response, a dictionary containing: operation: "AddParticipant" status_code participant_id: string: a unique ID for identifying the participant in the Pro Lab project	Create a new participant in the Tobii Pro Lab project.
find_participant()	participant_name: name of the participant	exists: a boolean	Find whether a participant already exists in the Tobii Pro Lab project.
list_participants()		response, a dictionary containing: operation: "ListParticipants" status_code A list of participants, with each entry being a dictionary containing: participant_name: a string: the name that was provided to Pro Lab for the participant participant_id: string: a unique ID for identifying the participant in the Pro Lab project	List all participants in the Tobii Pro Lab project.
upload_media()	media_name: name of the file to upload (including the file extension). Understood media types when a filename is provided are bmp, jpg, jpeg, png, gif, mp4 and avi media_type: 'image' or 'video'		Upload media to the Tobii Pro Lab project.
find_media()	media_name: name of the media to find (case sensitive)	exists: a boolean indicating whether the media exists	Find media by name in the Tobii Pro Lab project.
list_media()		response, a dictionary containing: operation: "ListMedia" status_code A list of media, with each entry being a dictionary containing: media_name: a string: the name that was provided to Pro Lab for the media media_id: string: a unique ID for identifying the media in the Pro Lab project md5_checksum: (only present for some values) the hash value that can be used to verify the file mime_type: a string: the type of the media file, in the format "image" or "video" / file extension e.g. "image/jpeg" media_size: the size of the file width height duration: 0 for images	List all media in the Tobii Pro Lab project.
add_aois_to_image	media_id: id of the media in Pro Lab to define an AOI for aoi_name: name of the AOI aoi_color: color in which to show the AOI in Pro Lab (RGB, 0-255) key_frame_vertices: 2xN matrix of vertices of the AOI key_frame_active: (optional) Default: true. key_frame_seconds: (optional) Default: 0. tag_name: (optional) name of tag for identifying the AOI in Pro Lab. Default: empty string. group_name: (optional) the name of the tag group. Default: empty string. merge_mode: (optional) Default: replace_aois.	response, a dictionary containing: operation: "sendAois" status_code imported_aoi_count	Define an AOI for a specific media in the Pro Lab project.
add_aois_to_video	media_id: id of the media in Pro Lab to define an AOI for aoi_name: name of the AOI aoi_color: color in which to show the AOI in Pro Lab (RGB, 0-255) key_frame_vertices: 2xN matrix of vertices of the AOI key_frame_active: (optional) Default: true. key_frame_seconds: (optional) Default: 0. tag_name: (optional) name of tag for identifying the AOI in Pro Lab. Default: empty string. group_name: (optional) the name of the tag group. Default: empty string. merge_mode: (optional) Default: replace_aois.	response, a dictionary containing: operation: "sendAois" status_code imported_aoi_count	Define an AOI for a specific media in the Pro Lab project.
get_state()		response, a dictionary containing: operation: "GetState" status_code state: The current state	Get the state of the external presenter service in Pro Lab.
start_recording()	recording_name: name by which the recording will be identified in Pro Lab participant_id: the ID (from Pro Lab) of the participant associated with this recording screen_width: width of the screen in pixels screen_height: height of the screen in pixels screen_latency: (optional) numeric value indicating delay between drawing commands being issued and the image actually appearing on the screen. Default: 10000.	response, a dictionary containing: operation: "StartRecording" status_code recording_id: A unique identifier for the new recording	Tell Pro Lab to start a recording.
stop_recording()			Stop a currently ongoing recording of Tobii Pro Lab.
finalize_recording()	recording_id: the ID (from Pro Lab) of the recording that was just stopped		Finalize the stopped recording in Tobii Pro Lab. Note: after this call, you must still click ok in the Pro Lab user interface.
send_stimulus_event()	recording_id: the ID (from Pro Lab) of the recording start_timestamp: timestamp (in seconds or microseconds) at which stimulus presentation started. end_timeStamp: (optional) timestamp (in seconds or microseconds) of when presentation of this stimulus ended. If empty, it is assumed stimulus remained on screen until start of the next stimulus media_id: unique identifier by which shown media stimulus is identified in Pro Lab media_position: (optional) location of the stimulus on screen in pixels, format: [left top right bottom] background: (optional) color of background (RGB: 0-255) on top of which stimulus was shown		Inform Pro Lab when and where a media (stimulus) was shown.
send_custom_event()	recording_id: the ID (from Pro Lab) of the recording timestamp: (optional) timestamp (in s) at which event occured. If empty, current time is taken as event time event_type: string: event type name value: (optional) string, the value of the event		Add an event to Pro Lab's timeline.
disconnect()			Disconnect from Tobii Pro Lab.