collective.recipe.supervisor 1.0.0

Supported options

The recipe supports the following options:

sections

List of enabled supervisor sections. Defaults to enable all: global http ctl rpc services.

plugins

Extra eggs you want the recipe to install, e.g. superlance

http-socket

inet or unix socket to use for HTTP administration. Defaults to inet.

file

A path to a UNIX domain socket (e.g. /tmp/supervisord.sock) on which supervisor will listen for HTTP/XML-RPC requests.

chmod

Change the UNIX permission mode bits of the UNIX domain socket to this value at startup.

chown

Change the ownership of the UNIX domain socket to this value at startup. Either user or user:group.

port

The port number supervisord listens to, e.g. 9001. Can be given as host:port, e.g. 127.0.0.1:9001. Defaults to 127.0.0.1:9001

user

The username required for authentication to supervisord

password

The password required for authentication to supervisord

supervisord-conf

Full path to where the recipe puts the supervisord configuration file. Defaults to ${buildout:directory}/parts/${name}/supervisord.conf

supervisord-user

If supervisord is run as the root user, switch users to this UNIX user account before doing any meaningful processing. This value has no effect if supervisord is not run as root.

supervisord-directory

When supervisord daemonizes, switch to this directory. This option can include the value %(here)s, which expands to the directory in which the supervisord configuration file was found.

supervisord-environment

A list of key/value pairs in the form KEY=val,KEY2=val2 that will be placed in the supervisord process’s environment (and as a result in all of its child processes’ environments). This option can include the value %(here)s, which expands to the directory in which the supervisord configuration file was found. Note that subprocesses will inherit the environment variables of the shell used to start supervisord except for the ones overridden here and within the program’s environment configuration stanza.

childlogdir

The full path of the directory where log files of processes managed by Supervisor while be stored. Defaults to ${buildout:directory}/var/log

logfile

The full path to the supervisord log file. Defaults to ${buildout:directory}/var/log/supervisord.log

pidfile

The pid file of supervisord. Defaults to ${buildout:directory}/var/supervisord.pid

logfile-maxbytes

The maximum number of bytes that may be consumed by the activity log file before it is rotated. Defaults to 50MB.

logfile-backups

The number of backups to keep around resulting from activity log file rotation. Defaults to 10.

loglevel

The logging level. Can be one of critical, error, warn, info, debug, trace, or blather. Defaults to info.

umask

The umask of the supervisord process. Defaults to 022.

nodaemon

If true, supervisord will start in the foreground instead of daemonizing. Defaults to false.

nocleanup

Prevent supervisord from clearing any existing AUTO child log files at startup time. Useful for debugging. Defaults to false.

serverurl

The URL that should be used to access the supervisord server. Defaults to http://127.0.0.1:9001

programs

A list of programs you want the supervisord to control. One per line. The format of a line is as follows:

priority process_name [(process_opts)] command [[args] [directory] [[redirect_stderr]] [user]]

The [args] are any number of arguments you want to pass to the command. It has to be given between [] (e.g. [-v fg]). See examples below. If not given, redirect_stderr defaults to false. If not given, the directory option defaults to the directory containing the the command. The optional process_opts argument sets additional options on the proccess in the supervisord configuration. It has to be given between () and must contain options in key=value format with spaces only for separating options – e.g. (autostart=false startsecs=10). The optional user argument gives the userid that the process should be run as (if supervisord is run as root).

In most cases you will only need to give the 4 first parts:

priority process_name command [[args]]

eventlisteners

A list of eventlisteners you’d like supervisord to run as subprocesses to subscribe to event notifications. One per line. Relevant supervisor documentation about events is at http://supervisord.org/events.html

processname [(process_opts)] events command [[args]]

events is a comma-separated list (without spaces) of event type names that the listener is interested in receiving notifications for.

Supervisor provides one event listener called memmon which can be used to restart supervisord child process once they reach a certain memory limit. Note that you need to define the variables user, password and serverurl (described in the supported options above) to be able to use the memmon listener. An example of defining a memmon event listener, which analyzes memory usage every 60 seconds and restarts as needed could look like:

MemoryMonitor TICK_60 ${buildout:bin-directory}/memmon [-p process_name=200MB]

As eventlisteners are a special case of processes, the also accept process options. One useful option is to start an eventlistener like the HttpOk checker only after your webserver has had time to start and load, say after 20 seconds:

HttpOk (startsecs=20) TICK_60 ${buildout:bin-directory}/httpok [-p web -t 20 http://localhost:8080/]

groups

A list of programs that become part of a group. One per line. The format of a line is as follow:

priority group_name program_names

programs_name is a comma-separated list of program names.

env-path

The environment variable PATH, e.g. /bin:/sbin:/usr/bin:/usr/sbin:/usr/local/bin

Example

[buildout]
parts = supervisor

# ...configure zope/zeo here...

[supervisor]
recipe = collective.recipe.supervisor

port = 9001
user = johndoe
password = secret
serverurl = http://supervisor.johndoe.com

plugins =
      superlance

programs =
      10 zeo ${zeo:location}/bin/runzeo ${zeo:location}
      20 instance1 ${instance1:location}/bin/runzope ${instance1:location} true
      30 instance2 (autostart=false) ${instance2:location}/bin/runzope true
      40 maildrophost ${buildout:bin-directory}/maildropctl true
      50 other ${buildout:bin-directory}/other [-n 100] /tmp
      60 other2 ${buildout:bin-directory}/other2 [-n 100] true
      70 other3 (startsecs=10) ${buildout:bin-directory}/other3 [-n -h -v --no-detach] /tmp3 true www-data

eventlisteners =
      Memmon TICK_60 ${buildout:bin-directory}/memmon [-p instance1=200MB]
      HttpOk (startsecs=20) TICK_60 ${buildout:bin-directory}/httpok [-p instance1 -t 20 http://localhost:8080/]

groups =
      10 services zeo,instance1
      20 others other,other2,other3

Upgrading

If upgrading from v0.19 to 0.20 the sections parameter got two new sections global and services. If sections parameter was set in old buildout config: in order to get the same behavior as before append the two new section names to value of sections.

Source Code

The sources are in a GIT DVCS with its main branches at github collective.

We’d be happy to see many contributions to make it even better.

1.0.0 (2019-04-15)

• Improved code quality, fixing flake8 warning ‘W605 invalid escape sequence’ for regular expressions. [maurits]

• Support the chown option in the unix_http_server section. [guewen]

• Tested with Python 2.7, 3.6, 3.7. [davidweterings, maurits]

0.20 (2015-10-06)

• Fix tests to be able to run. Fixes https://github.com/collective/collective.recipe.supervisor/issues/10 [gforcada]

• fix: memscript install script did not get conf file because of a typo. [moriyoshi]

• Feature: exclude global configuration so the generated file can be used to be included by a system wide supervisord. [jensens]

• Cleanup/overhaul/pep8 of code base, include self contained buildout with testrunner [jensens]

0.19 (2013-01-09)

• Fix the dissapearance of dependencies from the picked eggs after the first run of buildout. [afrepues]

• Fix e-mail address in project history file, somehow it was wrong, oh well. [afrepues]

0.18 (2012-11-16)

• Add travis-ci support [fredvd]

• Add process options to eventlisteners so you can for example delay them. [fredvd]

• Fix doctests, pin supervisor and superlance in the doctests [fredvd]

• Add support for setting user, directory and environment options of supervisord [anthonygerrard]

0.17 (2011-07-28)

• Added support for process groups [nueces]

0.16 (2011-03-07)

• Fix supervisorctl to use unix_http_server if used [Domen Kožar, NiteoWeb. Work sponsored by Hexagon IT]

0.15 (2011-03-05)

• Added support for unix_http_server additionally to inet_http_server [Domen Kožar, NiteoWeb. Work sponsored by Hexagon IT]

0.14 (2010-12-10)

• Added support for the umask option of supervisord [afrepues@mcmaster.ca]

• Move the credentials needed for authenticating with the supervisord process from the supervisorctl script to the configuration file. Because of bug 180705 of zc.buildout, scripts are made world-readable. [afrepues@mcmaster.ca]

0.13 (2010-12-07)

• ‘nocleanup’ option of Supervisor is now configurable from Buildout Patch from Damien Letournel

0.12 (2010-08-04)

• Quote the environment variables that are written in the supervisor configuration file for eventlisteners, otherwise supervisor will not pass them on correctly to for example memmon [Fred van Dijk]

0.11 (2010-08-02)

• ‘childlogdir’ option of Supervisor is now configurable from Buildout [Jonathan Ballet]

• [include] functionnality in the supervisor configuration file. See http://supervisord.org/configuration.html#include [ycadour]

0.10.1 (2010-07-27)

• Updated documentation about how to use the memmon event listener [lucielejard]

0.10 (2010-06-03)

• Added an option for the environment variable PATH [lucielejard]

• Added support for disabling supervisor sections (such as http, rpc and ctl) [Domen Kozar]

0.9 (2009-11-04)

• Applied Jonathan Ballet’s patch: The generated control script doesn’t automatically connect on the created supervisord when running on a custom port.

0.8 (2009-04-27)

• Make it possible to set additional options per process in the control script. [nkryptic]

0.7 (2009-01-27)

• Added ‘plugins’ option so we can install extra eggs (supervisor plugins) [mustapha]

• Some fixes for eventlistner part [mustapha]

• Updated tests

0.6 (2008-11-10)

• One can now specify the user account that will be used as the account which runs the program. [amos]

0.5 (2008-08-23)

• Adding eventlistners option for use as event notification framework. Targetting use with supervisor’s memmon event listener [aburkhalter]

0.4 (2008-06-12)

• Use dynamic script names to allow multiple cluster [gawel]

• Ensure that the log dir is created when used without zope’s recipes [gawel]

0.3 (2008-06-01)

• Updated docs and tests [mustapha]

• pep8 cosmetics [mustapha]

• Make it possible to pass in arguments to the control script. [hannosch]

• Put all specified options, like server url and username into the generated control script. This allows to run it as is. [hannosch]

0.2 (2008-04-23)

• Make possible to pass arguments to the command so one can use ctl scripts with supervisor with arguments like ‘fg’ for zope instances or –no-detach or something similar for other programs [mustapha]

• updated tests [mustapha]

0.1 (2008-04-21)

• Created recipe with ZopeSkel [Mustapha Benali].