py-momit-cool-remote is a Python 3 library for remotely controlling your air conditioning unit through the use of the Momit Cool.
The Momit Cool is a small device that can be attached to your AC, allowing you to control it from your smart phone. In order to accomplish remote control from anywhere, commands are sent to their central server, which then sends them to your Momit Gateway device. py-momit-cool-remote communicates directly with the Momit Gateway, completely circumventing Momit’s servers.
https://www.momit.com/en-ro/products/cool
Note: Python 3.5 and newer only.
Installation
$ pip install py-momit-cool-remoteMake sure that pip refers to the pip installation for Python 3. You might have to install the package using pip3.
Example usage
from momitcool import MomitCool
cool = MomitCool('192.168.3.164')
cool.cool() # turn on in cooling mode
cool.off() # turn off
cool.temperature() # get current temperature
cool.mode() # cooling/heating/off$ momit-cool --host 192.168.3.164 --cool
$ momit-cool --host 192.168.3.164 --off
$ momit-cool --host 192.168.3.164 --temperature
$ momit-cool --host 192.168.3.164 --modeDetails
The Momit Cool is a commercial, closed source product that does not have any documentation on how communication is performed. All of the information provided in this repository was found by reverse engineering the protocol. I uncovered most of the information by ARP poisoning and intercepting the traffic between the Momit Gateway and the Momit servers. The Momit Gateway communicates over the CoAP protocol.
CoAP servers typically implement the CoRE standard, allowing service and resource discovery. Performing this on the Momit Cool Gateway allows us to retrieve a list of available resources:
coap get coap://192.168.3.164:11686/.well-known/core
</.well-known/core>;ct=40,
<//>;title="Default root resource",
</0/1>;title="Security: PUT value";rt="Security",
</1/1>;title="Server: PUT value";rt="Server",
</3/0/12>;title="Init Bootstrapping";rt="Init Bootstrapping",
</3/0/0>;title="Manufacturer";rt="Manufacturer",
</3/0/1>;title="Model Number";rt="Model Number",
</3/0/2>;title="Serial Number";rt="Serial Number",
</3/0/3>;title="FW version";rt="FW version",
</3/0/4>;title="Reboot";rt="Reboot",
</3/0/5>;title="Factory Reset";rt="Factory Reset",
</3/0/16>;title="HW version";rt="HW version",
</4/0/4>;title="Ip";rt="IPv6",
</3/0/14>;title="Tx powerl";rt="TX power",
</3/0/15>;title="Channel: PUT value";rt="Channel",
</10241/0/0>;title="TEM-HUM-BAT";obs,
</10243/0/6>;title="factory_programming: PUT value";rt="factory_programming",
</10243/0/10>;title="Router ip";rt="IPv6 Router",
</10243/0/12>;title="ServerIp";rt="ServerIp",
</10243/0/13>;title="Neighbours";rt="Neighbours",
</10243/0/20>;title="HW version";rt="HW version",
</10243/0/21>;title="HW version";rt="HW version",
</5/0/0>;title="FW package can be updated using PUT method";rt="block";sz="MAX_PLUGFEST_BODY",
</5/0/2>;title="fw_update";rt="fw_update",
</5/0/3>;title="fw_state";rt="fw_state",
</5/0/5>;title="fw_update_result";rt="fw_update_result",
</3/0/10>
coap get coap://192.168.3.164:15395/.well-known/core
</.well-known/core>;ct=40,
<//>;title="Default root resource",
</0/1>;title="Security: PUT value";rt="Security",
</1/1>;title="Server: PUT value";rt="Server",
</3/0/12>;title="Init Bootstrapping";rt="Init Bootstrapping",
</3/0/0>;title="Manufacturer";rt="Manufacturer",
</3/0/1>;title="Model Number";rt="Model Number",
</3/0/2>;title="Serial Number";rt="Serial Number",
</3/0/3>;title="FW version";rt="FW version",
</3/0/4>;title="Reboot";rt="Reboot",
</3/0/5>;title="Factory Reset";rt="Factory Reset",
</3/0/9>;title="Battery status";rt="Battery",
</3/0/14>;title="Tx powerl";rt="TX power",
</3/0/15>;title="Channel: PUT value";rt="Channel",
</3/0/16>;title="HW version";rt="HW version",
</5/0/0>;title="FW package can be updated using PUT method";rt="block";sz="MAX_PLUGFEST_BODY",
</5/0/2>;title="fw_update";rt="fw_update",
</5/0/3>;title="fw_state";rt="fw_state",
</3/0/10>,
</5/0/5>;title="fw_update_result";rt="fw_update_result",
</10241/0/0>;title="TEM-HUM-BAT";obs,
</10242/0/0>;title="Events";obs,
</10243/0/1>;title="Cal Temp: PUT value";rt="Cal Temp",
</10243/0/2>;title="Cal Hum: PUT value";rt="Cal Hum",
</10243/0/6>;title="Hysteresis: PUT value";rt="Hysteresis",
</10243/0/10>;title="Router ip";rt="IPv6 Router",
</10243/0/11>;title="Error code";rt="HW",
</10243/0/12>;title="ServerIp";rt="ServerIp",
</10243/0/13>;title="Neighbours";rt="Neighbours",
</10243/0/16>;title="SetPoint event";obs,
</10244/0/0>;title="IR capture command,
</10244/0/1>;title="IR Status Command";obs,
</10244/0/2>;title="IR Send Command,
</10244/0/3>;title="IR Autocheck: PUT value";rt="IR Autocheck",
</10244/0/4>;title="IR TX Mode: PUT value";rt="IR TX Mode",
</10243/0/20>;title="HW version";rt="HW version",
</10243/0/21>;title="HW version";rt="HW version"Turning on
PUT /10242/0/0
Content-Format: 1541
cm=cool,t=1335,sp=210Turning off
PUT /10242/0/0
Content-Format: 1541
cm=cool,t=0,sp=offReferences
1 maintainer
Metadata
1 maintainer
Release files for py-momit-cool-remote 1.1
For a detailed explanation of source distributions (sdists) and built distributions (wheels), please see the package formats documentation.
Source distribution (sdist)
| File | Size | Uploaded | Provenance | Actions |
|---|---|---|---|---|
| py-momit-cool-remote-1.1.tar.gz | 6.8 kB | Without provenance | Details for py-momit-cool-remote-1.1.tar.gz |
Release files / py-momit-cool-remote-1.1.tar.gz
| Download URL | py-momit-cool-remote-1.1.tar.gz |
|---|---|
| Size | 6.8 kB |
| Tags | Source |
|
SHA-256 checksum How to use checksums |
737a05e7e6073326f9b47f4eb30caa9fb36a7d54c4f2851c8f03b0833223e1ab
|
|
BLAKE2b-256 checksum How to use checksums |
5a4bee02e68cb3a66481ea4b257ffcbf19951d402b2b20afd1a3b6b4da1e0e08
|
| Upload date | |
|
Uploaded using Trusted Publishing? What is trusted publishing? |
No |
| Uploaded via |
twine/3.1.1 pkginfo/1.5.0.1 requests/2.22.0 setuptools/41.6.0 requests-toolbelt/0.9.1 tqdm/4.41.1 CPython/3.7.5
|
Security for py-momit-cool-remote 1.1
Provenance
Provenance describes where a file came from. On PyPI, provenance is shared via attestations, which provide a verifiable record of the build or publishing details. View details, limitations and caveats.
No provenance found
None of the files in this release were uploaded with provenance metadata.
A note on package security
PyPI is a repository for distributing packages, not a service for auditing them. While third-party security researchers and our staff do their best to detect and remove malicious packages, PyPI cannot guarantee the quality, security or suitability of any given package.
To learn more about protecting yourself from malicious actors, visit our package security documentation.
