Test

The library is currently test on Python 2.6, 2.7

Setup

The package can be installed from

GitHub:

git clone https://github.com/ruscito/pycomm.git
cd pycomm
sudo python setup.py install

PyPi:

pip install pycomm

ab_comm

ab_comm is a module that contains a set of classes used to interface Rockwell PLCs using Ethernet/IP protocol. The “clx” class can be used to communicate with Compactlogix, Controllogix PLCs The “slc” can be used to communicate with Micrologix or SLC PLCs

I tried to followCIP specifications volume 1 and 2 as well as Rockwell Automation Publication 1756-PM020-EN-P - November 2012 .

See the following snippet for communication with a Controllogix PLC:

from pycomm.ab_comm.clx import Driver as ClxDriver
import logging


if __name__ == '__main__':
    logging.basicConfig(
        filename="ClxDriver.log",
        format="%(levelname)-10s %(asctime)s %(message)s",
        level=logging.DEBUG
    )
    c = ClxDriver()

    if c.open('172.16.2.161'):

        print(c.read_tag(['ControlWord']))
        print(c.read_tag(['parts', 'ControlWord', 'Counts']))

        print(c.write_tag('Counts', -26, 'INT'))
        print(c.write_tag(('Counts', 26, 'INT')))
        print(c.write_tag([('Counts', 26, 'INT')]))
        print(c.write_tag([('Counts', -26, 'INT'), ('ControlWord', -30, 'DINT'), ('parts', 31, 'DINT')]))

        # To read an array
        r_array = c.read_array("TotalCount", 1750)
        for tag in r_array:
            print (tag)

        # reset tha array to all 0
        w_array = []
        for i in xrange(1750):
            w_array.append(0)
        c.write_array("TotalCount", "SINT", w_array)

        c.close()

See the following snippet for communication with a Micrologix PLC:

from pycomm.ab_comm.slc import Driver as SlcDriver
import logging


if __name__ == '__main__':
    logging.basicConfig(
        filename="SlcDriver.log",
        format="%(levelname)-10s %(asctime)s %(message)s",
        level=logging.DEBUG
    )
    c = SlcDriver()
    if c.open('172.16.2.160'):

        print c.read_tag('S:1/5')
        print c.read_tag('S:60', 2)

        print c.write_tag('N7:0', [-30, 32767, -32767])
        print c.write_tag('N7:0', 21)
        print c.read_tag('N7:0', 10)

        print c.write_tag('F8:0', [3.1, 4.95, -32.89])
        print c.write_tag('F8:0', 21)
        print c.read_tag('F8:0', 3)

        print c.write_tag('B3:100', [23, -1, 4, 9])
        print c.write_tag('B3:100', 21)
        print c.read_tag('B3:100', 4)

        print c.write_tag('T4:3.PRE', 431)
        print c.read_tag('T4:3.PRE')
        print c.write_tag('C5:0.PRE', 501)
        print c.read_tag('C5:0.PRE')
        print c.write_tag('T4:3.ACC', 432)
        print c.read_tag('T4:3.ACC')
        print c.write_tag('C5:0.ACC', 502)
        print c.read_tag('C5:0.ACC')

        c.write_tag('T4:2.EN', 0)
        c.write_tag('T4:2.TT', 0)
        c.write_tag('T4:2.DN', 0)
        print c.read_tag('T4:2.EN', 1)
        print c.read_tag('T4:2.TT', 1)
        print c.read_tag('T4:2.DN',)

        c.write_tag('C5:0.CU', 1)
        c.write_tag('C5:0.CD', 0)
        c.write_tag('C5:0.DN', 1)
        c.write_tag('C5:0.OV', 0)
        c.write_tag('C5:0.UN', 1)
        c.write_tag('C5:0.UA', 0)
        print c.read_tag('C5:0.CU')
        print c.read_tag('C5:0.CD')
        print c.read_tag('C5:0.DN')
        print c.read_tag('C5:0.OV')
        print c.read_tag('C5:0.UN')
        print c.read_tag('C5:0.UA')

        c.write_tag('B3:100', 1)
        print c.read_tag('B3:100')

        c.write_tag('B3/3955', 1)
        print c.read_tag('B3/3955')

        c.write_tag('N7:0/2', 1)
        print c.read_tag('N7:0/2')

        print c.write_tag('O:0.0/4', 1)
        print c.read_tag('O:0.0/4')

    c.close()

The Future

This package is under development. The modules _ab_comm.clx_ and _ab_comm.slc_ are completed at moment but other drivers will be added in the future.

Thanks

Thanks in advance for feedback and suggestions

License

pycomm is distributed under the MIT License