AlgoTradeKit 0.7.1

Algorithmic Trading Toolkit — data collection, indicators, strategy, simulation, and live trading

AlgoTradeKit

AlgoTradeKit is a modular Python library for building, backtesting, and visualising algorithmic trading strategies. Every indicator is implemented from scratch — no pandas-ta, no ta-lib — so you have full control over every calculation.

pip install AlgoTradeKit

Requires Python 3.10+

---

Table of Contents

1. Architecture Overview
2. data — OHLCV Collection
3. indicator — Technical Indicators
4. strategy — Signal Generation
5. simulate — Backtesting Engine
6. visual — Interactive Chart
7. report — Simulation Report
8. Built-in MACD Strategy Demo
9. Configuration Reference

---

Architecture Overview

AlgoTradeKit/
├── data/           Download and cache OHLCV candles from exchange REST APIs
├── indicator/      RSI, MACD, EMA, SMA, Bollinger Bands, ATR, Ichimoku
├── strategy/       BaseStrategy, Signal, StrategyResult, built-in strategies
├── simulate/       Backtesting engine, position management, SimulateReport
├── visual/         Interactive candlestick chart served in your browser
└── report/         Interactive simulation report web page  ← new in v0.7.0

Data flows in one direction:

data ──► indicator ──► strategy ──► simulate ──► report
                                         └──────► visual

---

data — OHLCV Collection

from AlgoTradeKit.data import Collector

collector = Collector(
    exchange="binance_futures",
    symbol="BTCUSDT",
    timeframes=["1h", "4h"],
    save_dir="data/",
)
data = collector.fetch(start="2024-01-01", end="2024-12-31")
# data["1h"] → pd.DataFrame  columns: timestamp(UTC ms), open, high, low, close, volume

Load from an existing CSV:

import pandas as pd
data = {"1h": pd.read_csv("data/binance-futures_BTCUSDT_1h.csv")}

---

indicator — Technical Indicators

All indicators are built from scratch — no third-party TA wrappers.

from AlgoTradeKit.indicator import RSI, MACD, EMA, SMA, BollingerBands, ATR, Ichimoku

close = df["close"]   # pd.Series

rsi  = RSI(close, length=14)           # rsi.value
macd = MACD(close, fast=12, slow=26, signal=9)
                                        # macd.macd_line, .signal_line, .histogram
ema  = EMA(close, length=20)           # ema.value
sma  = SMA(close, length=50)           # sma.value
bb   = BollingerBands(close, length=20, std=2.0)
                                        # bb.upper, .middle, .lower
atr  = ATR(df["high"], df["low"], close, length=14)  # atr.value
ichi = Ichimoku(df["high"], df["low"], close)
                                        # ichi.tenkan/kijun/senkou_a/senkou_b/chikou

---

strategy — Signal Generation

Subclass BaseStrategy, implement two methods, and return Signal objects.

from AlgoTradeKit.strategy import BaseStrategy, Signal, StrategyMode

class EMAStrategy(BaseStrategy):

    def prepare_indicators(self, data):
        df = data["1h"].copy()
        df["ema20"] = EMA(df["close"], 20).value
        return {**data, "1h": df}

    def generate_signals(self, data):
        df, signals = data["1h"], []
        for i in range(1, len(df)):
            r, p = df.iloc[i], df.iloc[i - 1]
            if p["close"] < p["ema20"] and r["close"] >= r["ema20"]:
                signals.append(Signal(
                    direction="long",
                    entry_price=r["close"],
                    stop_loss=r["close"] * 0.98,
                    take_profit=r["close"] * 1.04,
                    timestamp=int(r["timestamp"]),
                    candle_index=i,
                    timeframe="1h",
                ))
        return signals

result = EMAStrategy().run(data, mode=StrategyMode.BACKTEST)

Strategy Drawings (v0.7.0)

Strategies can attach visual drawings so they appear on the candle chart:

# In generate_signals or prepare_indicators:
self._drawings.append({
    "type": "hline", "price": 42000.0,
    "color": "#58a6ff", "label": "Support",
})

# Return them in StrategyResult:
return StrategyResult(..., drawings=self._drawings)

Built-in Strategies

Strategy	Import
MACD Crossover	from AlgoTradeKit.strategy.builtin.macd import MACDCrossoverStrategy

from AlgoTradeKit.strategy.builtin.macd import MACDCrossoverStrategy

strategy = MACDCrossoverStrategy(fast=12, slow=26, signal=9,
                                  sl_atr_multiplier=1.5, timeframe="1h")
result = strategy.run(data)

---

simulate — Backtesting Engine

Replay StrategyResult signals candle-by-candle and produce a SimulateReport.

Basic Usage

from AlgoTradeKit.simulate import Simulate, SimulateConfig

config = SimulateConfig(
    initial_balance=10_000,
    symbol="btcusdt",
    leverage=10,
    commission=0.001,         # 0.1% per side
    risk_per_trade=1.0,       # 1% of balance at risk
    tp_mode="fixed_rr",
    tp_rr=2.0,
    primary_timeframe="1h",
)
report = Simulate(config).run(strategy_result)
print(report)

Auto Visualisation (v0.7.0)

config = SimulateConfig(
    ...
    show_chart=True,          # open candle chart with position boxes
    report_mode="both",       # "none" | "webpage" | "save" | "both"
    report_save_path="report.html",
)
report = Simulate(config).run(strategy_result)
# → two browser tabs open: candle chart and report page
# → report.html saved to disk

SimulateConfig Key Fields

Field	Default	Description
initial_balance	10 000	Starting wallet balance
leverage	1.0	Leverage multiplier
commission	0.001	0.1% per side (percentage mode)
risk_per_trade	1.0	% of balance at risk per trade
tp_mode	"signal"	"signal"/"fixed_rr"/"multi_rr"/"none"
tp_rr	2.0	R:R ratio for fixed_rr mode
tp_levels	[1,2,3]	R levels for multi_rr mode
sl_mode	"signal"	"signal" or "trailing"
risk_free_enabled	False	Move SL to break-even at risk_free_at_rr
show_chart	False	v0.7.0 Open candle chart after run
report_mode	"none"	v0.7.0 Post-run report rendering
report_save_path	"report.html"	v0.7.0 HTML save path

Batch Sweep

from AlgoTradeKit.simulate import run_batch

reports = run_batch(strategy, data, [
    SimulateConfig(tp_rr=1.5),
    SimulateConfig(tp_rr=2.0),
    SimulateConfig(tp_rr=3.0),
])
best = max(reports, key=lambda r: r.sharpe_ratio)

Multi-Pair Portfolio

from AlgoTradeKit.simulate import run_multi

report = run_multi([
    (btc_strategy, btc_data, SimulateConfig(symbol="btcusdt")),
    (eth_strategy, eth_data, SimulateConfig(symbol="ethusdt")),
], initial_balance=10_000)

SimulateReport

report.total_pnl          # float
report.win_rate           # float (%)
report.profit_factor      # gross profit / gross loss
report.sharpe_ratio       # annualised Sharpe
report.sortino_ratio
report.calmar_ratio
report.max_drawdown       # DrawdownPeriod
report.significant_drawdowns  # list[DrawdownPeriod]
report.weekday_stats      # dict[str, WeekdayStats]
report.session_stats      # dict[str, SessionStats]  (London/NY/Tokyo/Sydney)
report.monthly_stats      # dict[str, MonthStats]
report.balance_history    # list[dict]
report.trade_markers      # list[dict]

---

visual — Interactive Chart

Interactive candlestick chart served locally, based on TradingView's lightweight-charts.

from AlgoTradeKit.visual import Chart

chart = Chart.from_csv("data/binance-futures_BTCUSDT_1h.csv")
chart.show(block=True)

Add Indicators

from AlgoTradeKit.visual import add_rsi, add_macd, add_ma, add_ichimoku
from AlgoTradeKit.indicator import RSI, MACD, EMA, Ichimoku

add_rsi(chart,  RSI(df["close"]),             timestamps=df["timestamp"])
add_macd(chart, MACD(df["close"]),            timestamps=df["timestamp"])
add_ma(chart,   EMA(df["close"], 20),         timestamps=df["timestamp"], name="EMA 20")
add_ichimoku(chart, Ichimoku(df["high"], df["low"], df["close"]),
                              timestamps=df["timestamp"])

Drawings

chart.add_hline(price=42_000, label="Support")
chart.add_box(time1=1700000000, price1=41_000,
              time2=1700007200, price2=43_000, opacity=0.1)
chart.add_signal(time=1700000000, side="buy")

Position Boxes (v0.7.0)

TradingView-style position boxes showing SL/TP zones with R:R labels:

from AlgoTradeKit.visual.indicator_renderer import add_simulation_positions

chart = Chart.from_csv("data/binance-futures_BTCUSDT_1h.csv")
add_simulation_positions(chart, report, opacity=0.15)
chart.show(block=True)

Manual single box:

chart.add_position_box(
    open_time=1700000000, close_time=1700003600,
    entry_price=50_000, stop_loss=49_500, take_profit=51_000,
    direction="long", net_pnl=100.0, close_reason="tp",
    trade_id=1, rr_ratio=2.0,
)

Strategy Drawings (v0.7.0)

from AlgoTradeKit.visual.indicator_renderer import add_strategy_drawings
add_strategy_drawings(chart, strategy_result)

Navigate to Candle (v0.7.0)

chart.navigate_to_candle(timestamp_ms=1700000000000)

---

report — Simulation Report (v0.7.0)

An interactive single-page web report for a SimulateReport.

Show in Browser

from AlgoTradeKit.report import show_report
show_report(report, block=True)

Save as Standalone HTML

from AlgoTradeKit.report import save_report_html
save_report_html(report, "report.html")

Report Page Sections

Section	Contents
Header	Symbol, config ID, PnL badge, PDF export
Config	All SimulateConfig parameters
Equity curve	Wallet/equity line, max DD shading, DD regions, trade dots (zoom/pan)
Trade tooltip	Entry/exit, SL/TP, PnL, R-multiple, close reason + "Open Chart" button
Performance KPIs	PnL%, win rate, avg win/loss, largest win/loss, avg R
Risk metrics	Profit factor, expectancy, Sharpe, Sortino, Calmar, recovery factor
Trade stats	Total/long/short, win/loss/BE, SL/TP/RF/FC/EOD counts
Drawdown table	All DDs above threshold, sorted by severity
Weekday analysis	Trades, win%, PnL per weekday
Session analysis	London, New York, Tokyo, Sydney, Off-Hours
Monthly analysis	Per-month: trades, win%, total PnL, avg PnL
Cost summary	Commission, spread, avg MAE, avg MFE

Clicking a trade dot and pressing "Open on Candle Chart" navigates the linked chart to that trade's entry candle.

---

Built-in MACD Strategy Demo

"""demo_macd.py — run MACD strategy, open chart + report."""

import pandas as pd
from AlgoTradeKit.strategy.builtin.macd import MACDCrossoverStrategy
from AlgoTradeKit.simulate import Simulate, SimulateConfig

# Load data (replace path with your CSV)
data = {"1h": pd.read_csv("data/binance-futures_BTCUSDT_1h.csv")}

# Run strategy
strategy = MACDCrossoverStrategy(fast=12, slow=26, signal=9,
                                  sl_atr_multiplier=1.5, timeframe="1h")
result = strategy.run(data)
print(f"Signals: {result.signal_count}")

# Simulate with auto chart + report
config = SimulateConfig(
    symbol="btcusdt",
    leverage=10,
    commission=0.001,
    risk_per_trade=1.0,
    tp_mode="fixed_rr",
    tp_rr=2.0,
    show_chart=True,
    report_mode="webpage",
)
report = Simulate(config).run(result)
print(report)

# Keep servers alive
import time
try:
    while True: time.sleep(1)
except KeyboardInterrupt:
    pass

Run:

python demo_macd.py

Two browser tabs open:

• Candle chart — with MACD indicator and position boxes for every trade
• Report page — equity curve, full metrics, drawdown table, time analysis

---

Configuration Reference

Report Mode Constants

Constant	Value	Behaviour
REPORT_MODE_NONE	"none"	No report (default)
REPORT_MODE_WEBPAGE	"webpage"	Open in browser
REPORT_MODE_SAVE	"save"	Save standalone HTML
REPORT_MODE_BOTH	"both"	Open + save

TP Mode Constants

Constant	Value	Behaviour
TP_MODE_SIGNAL	"signal"	Use Signal's take_profit
TP_MODE_FIXED_RR	"fixed_rr"	entry ± tp_rr × SL distance
TP_MODE_MULTI_RR	"multi_rr"	Multiple levels, SL trails
TP_MODE_NONE	"none"	No TP

SL Mode Constants

Constant	Value	Behaviour
SL_MODE_SIGNAL	"signal"	Use Signal's stop_loss
SL_MODE_TRAILING	"trailing"	Trail trailing_sl_percent% from peak

---

License

MIT — see LICENSE.