BaldrApp 0.1.6

Simulating Baldr - the Zernike Wavefront Sensor for Asgard

BaldrApp

Simulating Baldr - the Zernike Wavefront Sensor for Asgard

Includes

• A PyQt application for end-to-end simulatations and visualization of Baldr operations (closed and open loop for a single telescope). The gui allows downloading of configuration files and telemetry. After pip installation try type in a terminal (warning: it takes 1-2 minutes to calibrate before the app will appear):

python -m baldrapp.apps.baldr_closed_loop_app.closed_loop_pyqtgraph

The app contains a command prompt that is exposed to the full python environment of the simulation. The default initialised mode is open loop with a weak rolling Kolmogorov atmosphere, and calibrated zonal matricies with zero gain. Some basic commands to test :

zwfs_ns.ctrl.HO_ctrl.ki += 0.4 # put some non-zero gains

dynamic_opd_input=False #turn off rolling atmosphere phasescreen

M2C_0 = DM_basis.construct_command_basis( basis= "Zernike", 
number_of_modes = 20, without_piston=True).T # build a DM basis

dm_disturbance = M2C_0[5]* 1e-1 #put a static disturbance on the DM

• A Streamlit application that simulates a Zernike Wavefront Sensor optical system using Fresnel diffraction propagation to model system mis-alignments. The default setup is for simulating the last (critical) part of the optical train of Baldr. After pip installation try type in a terminal:

python -m baldrapp.apps.baldr_alignment_app.Baldr_Fresnel_App

• General python packaged tools for simulating ZWFS's. These build upon the python pyZELDA package (https://github.com/avigan/pyZELDA).

python
import baldrapp

Installation

pip install baldrapp

This has a dependancy on a forked version of the pyZELDA package (https://github.com/courtney-barrer/pyZELDA) which must be installed seperately

pip install pyzelda@git+https://github.com/courtney-barrer/pyZELDA.git@b42aaea5c8a47026783a15391df5e058360ea15e

Alternatvely the project can be cloned or forked from the Github:

git clone https://github.com/courtney-barrer/BaldrApp

The pip installation was tested on only on python 3.12.7.