FabOMatic 1.0.2

Backend for Fab-O-Matic RFID boards

Fab-O-Matic back-end

English | Italiano

What is this project?

• This is a web application to handle a FabLab machines access by Fab-O-Matic boards connected to the machines (see ESP32 project : Fab-O-Matic )

• Homescreen example, with real-time machine status:

• User Manual: PDF version | Markdown version

• This Python 3.10 application runs a MQTT client and a Flask HTTPS application.

• Articles describing the project are available on FabLab Bergamo website : https://www.fablabbergamo.it/2024/07/14/fabomatic7/

Features

• Web admin portal with user authentication over https

• Holds the member cards RFID database with their status (active, inactive). Easy registration of new members (swipe card on existing Fab-O-Matic and convert to new user).

• Machine maintenance plans based on actual hours with display on Fab-O-Matic LCD

• Permissions by user and machine (can be disabled)

• Machine history (usage and maintenance)

• Real-time dashboard of machines status

Backend runtime requirements

• An external MQTT Broker. Mosquitto has been used for testing.

• SQLAlchemy supports several database engines, but this has been tested with SQLite only.

Pre-requisites for Raspberry Pi Zero

• Install prerequisites (python 3.10+, rustc for cryptography, mosquitto, pip). It takes 3-4 hours on Raspberry Pi Zero to complete installation.

wget -qO - https://raw.githubusercontent.com/tvdsluijs/sh-python-installer/main/python.sh | sudo bash -s 3.10.9
sudo apt remove python3-apt
sudo apt install python3-apt
sudo curl --proto '=https' --tlsv1.2 -sSf https://sh.rustup.rs | sh
sudo apt install mosquitto

Pre-requisites for Linux machines

• On other Linux systems, the following requisites shall be enough:

sudo apt install python3-apt
sudo apt install rustc
sudo apt install mosquitto
sudo apt install dbus-user-session

Pre-requisites for firmware updates

• Espressif's ESPOTA tool is used to apply Over-the-air firmware updates to Fab-O-Matic boards.

wget https://raw.githubusercontent.com/espressif/arduino-esp32/master/tools/espota.py

Installation instructions

• Install from test pypi repository

pip install FabOMatic

• In the package installation directory, copy src/FabOMatic/conf/settings.example.toml into settings.toml and edit settings. On first run, if the settings.toml file is missing, the settings.example.toml file will be copied and used instead.

• Test it with

python -m FabOMatic 5

• After installation login with default admin email in settings file and "admin" password.

Default URL is https://HOSTNAME:23336/

• Setup backup strategy for database (database.sqldb), which is automatically created on first run.

• Setup systemd to automatically launch Python module on boot with user profile:

See sample configuration example in doc/systemd

How to upgrade release

• Use pip --upgrade :

pip install FabOMatic --upgrade

• Review settings.toml file after installation.

• Database upgrades are applied by Alembic at start of the backend and shall not need user interaction.

Configuration file

• For configuration, the file src/FabOMatic/conf/settings.toml in package installation directory is used.
• It contains configuration info for MQTT server (mandatory), database connection string (mandatory), SMTP for "forgot password" email (not mandatory), and weekly summary settings (optional)
• Example below

[database]
url = "sqlite:///machines.sqldb"
name = "fablab"

[MQTT]
broker = "127.0.0.1"
port = 1883
client_id = "backend"
topic = "machine/"        # root topic. Subtopics will be /machine/<ID> will be subscribed
reply_subtopic = "/reply"  # appended to the machine topics for replies by backend. E.g. machine/1/reply
stats_topic = "stats/"

[web]
secret_key = "some_long_hex_string_1234gs"  # Used for encryption
default_admin_email = "[e-mail]"    # Used for initial login
base_url = "fabpi.example.com"              # Base URL for web application (used in emails)

[email]
server = "smtp.google.com"
port = 587
use_tls = true
username = ""
password = ""
sender = "[e-mail]"

[weekly_summary]
enabled = true    # Enable weekly summary emails
language = "en"   # Language for emails: "en" or "it"

Developper notes

• Developped with VSCode, extensions: Python, SQLTools, SQLTools SQLite, Black formatter

• Create a python venv with Python >=3.10 and make sure your terminal has activated the venv

• Test settings are into tests\test_settings.toml file, to run tests from root folder (or Terminal)

pytest -v

• How to run the server from Terminal (from root folder)

pip install -e . 
python ./run.py

• Package requirements / How to package (see Python docs)

pip install --upgrade build
pip install --upgrade twine

To update distribution

python -m build
python -m twine upload dist/*

• To handle schema changes with existing installations, changes the database/models.py, check that the changes are properly captured by alembic, then generate a migration script, and apply it. Then commit all files and publish a new revision.

alembic check
alembic revision --autogenerate -m "Description of change"
alembic upgrade head

• To handle data migration you have to manually edit the generated migration file in alembic folder.

• After testing the new database schema, archive a copy of simple-db.sqldb (generated by pytest) into tests/databases folder with the revision name. This will ensure migrations will be tested on this new release in the future.

• Translations with Babel

Initial extract (run from src/FabOMatic folder)

pybabel extract -F babel.cfg -o messages.pot ./

Update merging the changes the translations files

pybabel update -i messages.pot -d translations

Adding a new locale

pybabel init -i messages.pot -d translations -l <locale>

Compile the changes

pybabel compile -d translations

GDPR compliance ⚖️

Members' RFID card will be tied to a physical person and therefore, you must collect written consent of this person as part of membership agreement.

Suggested GDPR agreement

• The reason for data collection is to control FabLab equipment usage for better maintenance of equipment and physical safety of the FabLab users.
• The data conservation period for RFID master data is for the duration of the membership to the FabLab with a minimum of one year.
• The data conservation period of historical records, including user name, time of use, machine used, maintenance operation performed is one year.
• After 1 year, the historical nominative data is automatically replaced with an anonymous user data.
• The system may collect RFID tags ID from nearby cards, not tied to the FabLab RFID master data. Such information will be deleted after one month.
• The responsible persons for data treatment are the Fab-O-Matic administrative users.
• The collected information is not shared outside Fab-O-Matic system or disclosed outside Fab-O-Matic admins.

What you need to do

• You need to secure access to the Fab-O-Matic backend webserver and physical hosts (use a proper password policy).
• You need to schedule a daily cron job in order to ensure data is deleted from database and logfiles

python -m FabOMatic --purge
journalctl --vacuum-time=1y

• To garantee data access requests, you can use the Excel export feature filtering data by the user.
• To garantee right to deletion, you can use the Delete buttons on Use, Interventions and User pages.

Weekly Summary Emails 📧

Fab-O-Matic can send automated weekly summary emails to users with statistics about machine usage, pending maintenance, and unrecognized cards.

Configuration

Add the following settings to your settings.toml:

[web]
base_url = "your.external.url.for.fabomatic"  # Your FabOMatic URL (used in email links)

[weekly_summary]
enabled = true       # Enable/disable weekly summary emails
language = "en"      # Language for emails: "en" or "it"

User Configuration

• Users must have an email address configured in their profile
• Users must enable "Receive weekly summary emails" checkbox in their profile
• This can be configured when adding or editing users in the admin interface

Scheduling Weekly Summaries

Set up a cron job to send weekly summaries. For example, to send every Sunday at 9 AM:

# Edit crontab
crontab -e

# Add this line to send weekly summaries every Sunday at 9:00 AM
0 9 * * 0 cd /path/to/FabOMatic && /path/to/venv/bin/python -m FabOMatic --weekly-summary --loglevel 40

Email Contents

Weekly summary emails include:

• Machine Usage Statistics: Time spent on each machine during the week (Sunday to Sunday)
• Pending Maintenance: List of machines requiring maintenance with hours overdue
• Unrecognized Cards: RFID cards that attempted access but are not registered
• Direct link: Link to FabOMatic web interface for more details

Testing

To manually trigger a weekly summary email:

python -m FabOMatic --weekly-summary

Main revision log

Version	When	Release notes
0.0.18	January 2024	first revision with Alembic for database version tracking to handle graceful updates
0.1.15	February 2024	improved UI on mobile, fixed duplicated uses, added grace period definition on machine types, added system page
0.2.0	February 2024	UI translations with flask-babel (IT, EN), added boards details in system page
0.3.0	May 2024	User authorizations can be disabled by Machine type, Maintenance URL field added, System page improvements (DB reload, log files)
0.4.0	June 2024	Buffered messages sent by Fab-O-Matic boards are flagged with a clock icon.
0.5.0	June 2024	First release on PyPi. Renamed to FabOMatic. Added GDPR compliance (purge function)
0.6.0	August 2024	Added remote commands from backend for cloud-enabled printers like BambuLab
0.7.0	December 2024	Bugfix release, no new features
0.7.4	October 2024	Added new settings page in Systems, fixed email hanging issue
1.0.0	October 2025	Major release: Complete UI modernization with modern design, search/filter functionality, improved navigation, responsive design, and enhanced user experience
1.0.1	October 2025	Added weekly summary email feature with automated activity reports, pending maintenance alerts, and unrecognized cards tracking. Fixed HTML link rendering bug in emails.