CircuitPython driver for DPS310.
Library of Infineon's highly sensitive DPS310 sensor for Arduino.
The DPS310 is a miniaturized digital barometric air pressure sensor with a high accuracy and a low current consumption, capable of measuring both pressure and temperature. The internal signal processor converts the output from the pressure and temperature sensor elements to 24 bit results. Each unit is individually calibrated, the calibration coefficients calculated during this process are stored in the calibration registers. The available raw data of the sensor can be calibrated by using the pre-calibrated coefficients as they are used in the application to convert the measurement results to high accuracy pressure and temperature values.
Sensor measurements and calibration coefficients are available through the serial I2C or SPI interface.
Key Features and Applications
- Supply voltage range 1.7V to 3.6V
- Operation range 300hPa – 1200hPa
- Sensor’s precision 0.005hPa
- Relative accuracy ±0.06hPa
- Pressure temperature sensitivity of 0.5Pa/K
- Temperature accuracy ±0.5C°
- Wearable applications, sport and fitness activities tracking
- Drones automatic pilot, fix point flying
- Indoor navigation, altitude metering
Integration of Library
Download the file for your platform. If you're not sure which to choose, learn more about installing packages.
|Filename, size||File type||Python version||Upload date||Hashes|
|Filename, size Infineon_DPS310-1.0.0-py3-none-any.whl (3.8 kB)||File type Wheel||Python version py3||Upload date||Hashes View hashes|
|Filename, size Infineon_DPS310-1.0.0.tar.gz (3.8 kB)||File type Source||Python version None||Upload date||Hashes View hashes|
Hashes for Infineon_DPS310-1.0.0-py3-none-any.whl