ioddcomcheckergui 1.9.2

IoddCom IO-Link master checker Gui

This is the GUI for checking your IO-Link masters working with Siogeen IoddCom.

For using CLI only use IoddComChecker

Install

Use pip to install IoddComCheckerGui:

>>> pip install IoddComCheckerGui

Usage

To start the Gui execute:

>>> python -m siogeen.tools.gui.IoddComChecker

For full package, requests and support go to https://siogeen.com

Copyright 2017-2026 Siogeen UG (limited liability)

Supported Platforms

OS	Python 3.6-3.8	Python 3.9 - 3.14
Windows	[1]	x [2]
Linux x86/x64	[1]	x
Linux Arm (Raspberry)	[1]	x
macOS	[1]	x

[1] (1,2,3,4)

IoddCom for Python 3.6 - 3.8 on request.

[2]

IoddCom for Win32 Python 3.9 - 3.13, so for 3.14+ on request.

Support for other platforms on request.

Supported operating systems and IO-Link masters

Table of supported IO-Link masters for specific operating systems (OS):

Master	supported OS
Windows	Linux	Raspberry Pi	macOS [3]
TMG-USB based masters	x	x [4]	x [4]	x [4]
TMG ethernet based masters [5]	x	x	x	x
ifm ethernet based masters [6]	x	x	x	x
ifm USB based masters [7]	x	x	x	x
Turck Multi-Protocol masters [8]	x	x	x	x
REST API based masters [9]	x	x	x	x
IQ2 based masters [10]	x	x	x	x
io-Fly based masters [11]	x	x	x	x

For macOS and Linux are 64-bit and for Windows and Raspberry Pi are both, 32-bit and 64-bit versions available.

[3]

For macOS 11.0+

[4] (1,2,3)

For example: Baumer, Leuze, Pepperl+Fuchs, SICK AG, Turck. Firmware v3.2+ only runs under Windows. For Linux/macOS/RasPi use FW < 3.2!

[5]

For Example: Balluff, Belden, Murrelektronik, Pepperl+Fuchs, Wenglor

[6]

All ifm IO-Link masters AL1xxx should be supported. Functionality depends on master type

[7]

ifm USB IO-Link master AL1060

[8]

Turck Multi-Protocol masters (Modbus TCP, PROFINET, EtherNet/IP): TBEN-L, TBEN-S, FEN20, … Special functions missing: read/write SIO, functions not available: data storage

[9]

REST API based masters (Sick SIG200/SIG350, Belden Lion-X, MurrElectronik Impact67 Pro/MVK Pro, Baumer, Beta: Balluff)

[10]

Experimental: Iq2 based masters (iqLink, iqInterface and SensoPart SensoIO)

[11]

io-Fly based masters (io-Fly, Baumer SensControl)

Not supported masters:

• Baumer USB-C masters

• RevolutionPi RevPi masters

• Pepperl & Fuchs comtrol masters

• Germbedded masters

• TEConcept masters

Support for them or other masters on request.

Supported functionality

All supported masters have the following functionality:

read/write ISDUs, read/write process data, get/set port config.

The following functionality is varying by master:

master	data storage	multi data / multi port	PD streaming	special functions
Sim	yes	read ISDU, read PD, read DI, multi-port	hw/sw	–
ifm ethernet based	yes	read PD, read DI, multi-port	hw/sw	yes
ifm USB based	yes	read PD, read DI, multi-port	sw	yes
REST API based	yes	read ISDU [13]	sw	yes, Balluff, SICK
TMG-USB based	yes [12]	read PD, read DI, multi-port	hw/sw	yes
TMG ethernet based	yes	read PD, read DI, multi-port	hw/sw	yes, Balluff
Turck Multi-Protocol	–	read PD, read DI, multi-port	sw	yes
Iq2 USB/ethernet	yes [14]	no	sw	yes
io-Fly	no	?	hw/sw	no

[12]

getConfig not supported, FW 3.2+: masterCommandDownloadFromMaster not supported anymore

[13]

REST API multi data write ISDU will be added in future

[14]

no read/write master DS supported (only config)