MEDS-DEV 0.0.11

Task configuration and helper files for the MEDS-DEV Benchmark

MEDS-DEV: Establishing Reproducibility and Comparability in Health AI

The MEDS Decentralized, Extensible Validation (MEDS-DEV) system is a new kind of benchmark for Health AI that has three key differences from existing systems:

1. Reproducibility first: MEDS-DEV is built for the MEDS Health AI ecosystem, and all model training recipes submitted to MEDS-DEV should, in theory, be transportable to any MEDS-compliant dataset. This means you can take any of the models profiled here and try them on your data as baselines for your papers! Similarly, all task definitions are ACES task configuration files, and should be extractable on any compatible dataset, provided the local data owner can identify the right predicates needed for each given task.
2. Decentralized Benchmarking: MEDS-DEV is built for the real world of health data -- a world of fragmented, decentralized access to data where experiments over key datasets must be run by local collaborators with access to those datasets, not by model authors. But even though datasets are fragmented, MEDS-DEV shows that results, reproducible training recipes, and insights don't have to be. This means we encourage you to upload new task definitions or new models that you've only profiled on a subset of datasets, as long as you provide the training recipes and task definitions! In time, we can "complete" the landscape of comparisons over datasets, tasks, and models, and MEDS-DEV is developing methods to produce generalizable insights even from decentralized results.
3. Extensible Predictive Landscape: Health AI isn't a field defined by one, two, or even a dozen prediction targets. We have myriad tasks of interest across all areas of clinical care, with tasks further changing over time as new diseases or health needs emerge across the world. MEDS-DEV is built to help us operationalize these different needs through the common, extensible repository of task definitions contained here. This means you can add new tasks to MEDS-DEV, and we encourage you to do so! Adding new tasks, even with no supported datasets, gives the community an opportunity to comment, critique, and refine these task definitions so that we can collectively operationalize what is worth studying in Health AI.

Beyond these factors, MEDS-DEV also aims to make it easier to perform meaningful, fair comparisons across AI systems, with standardized baselining systems that can be used on any task and dataset, a consistent evaluation paradigm to provide a common currency for comparison, and a commitment to open science, transparency, and reproducibility to help drive the field forward.

To see supported MEDS-DEV tasks, datasets, and models, see the links below:

1. Tasks
2. Datasets
3. Models

Note that this repository is not a place where functional code is stored. Rather, this repository stores configuration files, training recipes, results, etc. for the MEDS-DEV benchmarking effort -- runnable code will often come from other repositories, with operationalized instructions on how to leverage that external code in the given entry points for those models.

To see how to use and contribute to MEDS-DEV, see the sections below!

Installation

If you just want to reproduce MEDS-DEV models and tasks over public or your own, local datasets, you can install MEDS-DEV from PyPI via pip install MEDS-DEV.

If you want to contribute new models, tasks, or datasets to MEDS-DEV, you need to fork this repository, clone your fork, and then install the repository locally in "editable" mode via pip install -e .[dev,tests]. This will let you prepare your PR code and run the tests to ensure your contributions are valid and transportable across MEDS-DEV datasets and tasks.

Using Existing MEDS-DEV Datasets, Tasks, or Models

To reproduce a MEDS-DEV result (or transport a MEDS-DEV result to your local dataset), you will generally need to perform the following four steps:

1. Build the target dataset in MEDS format (if it is not already built).
2. Extract the task(s) of interest from that dataset.
3. Train the model(s) of interest on the extracted task(s) and make predictions for the test set. This may involve both unsupervised training (a.k.a. pre-training) and supervised training (a.k.a. fine-tuning), depending on the model.
4. Evaluate the predictions of the model(s) over the task(s) for the given dataset.

MEDS-DEV has helper functions to help you easily perform all of these steps.

Building a dataset

[!Note] If your dataset is already extracted in the MEDS format, you can skip this step and assume that $DATASET_DIR points to the directory containing your MEDS-formatted dataset.

To build a supported dataset that you have access to in the MEDS format at the specified version used in MEDS-DEV, you can use the meds-dev-dataset helper:

meds-dev-dataset dataset=$DATASET_NAME output_dir=$DATASET_DIR

where DATASET_NAME is the name of the dataset you want to build and OUTPUT_DIR is the directory where you want to store the final, MEDS-formatted dataset.

[!NOTE] Note that you can also specify demo=True to build a demo version of this dataset (if supported) for ease of testing the pipeline and your downstream code.

[!NOTE] Note that here, $DATASET_NAME is the entire, slash-separated path from src/MEDS_DEV/datasets/ to the directory containing the dataset's commands.yaml and README.md files. This name is a unique identifier for MEDS-DEV datasets so that the right task-specific predicates can be used and that it is clear what results were built on what dataset.

Extracting a task

[!Note] If your task labels are already extracted in the MEDS format, you can skip this step and assume that $LABELS_DIR points to the directory containing your MEDS-formatted task labels for the specific task of interest.

[!NOTE] MEDS-DEV currently only supports binary classification tasks.

To extract a task from a dataset, you can use the meds-dev-task helper:

meds-dev-task task=$TASK_NAME dataset=$DATASET_NAME output_dir=$LABELS_DIR dataset_dir=$DATASET_DIR

where $TASK_NAME is the name of the task you want to extract, $DATASET_NAME is the name of the dataset you are extracting from (this name is used to locate the right predicates.yaml file for the task), $DATASET_DIR is the root directory for the MEDS-compliant dataset, and $LABELS_DIR is the directory where you want to store the extracted task labels. The output will be a set of parquet files in the meds label format.

[!Warning] Right now, we don't have a good way to point to predicates files on disk that are used for datasets not yet configured for MEDS-DEV. File a new or up-vote any existing relevant GitHub issues for this functionality if it would be helpful for you! In general, we encourage that, eventually, any dataset over which MEDS-DEV results are reported publicly (e.g., in a publication) be added to MEDS-DEV (this does not necessitate data release -- merely that you include the predicate definitions used linked to a unique name, and ideally to the code you use to build the MEDS view of these data so others at your site can contribute in a reproducible way).

[!Note] Note that here, $TASK_NAME is the entire, slash-separated path from src/MEDS_DEV/tasks/ to the task configuration file. This name is a unique identifier for MEDS-DEV tasks.

[!Note] Note that it is guaranteeably true that not all tasks will be appropriate for or supported on all datasets. Some tasks are only suited for certain clinical populations, which may not exist on all datasets. We're still figuring out the best way to operationalize this formally, but for now, please be cognizant of whether or not a task should be used on your dataset, and if you have ideas on this, don't hesitate to weigh in on the GitHub Issue about this!

Using a model

[!Note] MEDS-DEV is not about (for now) assessing the generalizability of fully pre-trained models from site A to site B. Instead, it is about assessing the generalizability of model training recipes (e.g., algorithms). This section reflects that by giving instructions on how you can use MEDS-DEV to train a model from scratch on an included or your custom dataset.

To train a model on a task, you can use the meds-dev-model helper. This helper is a bit more complicated than the other helpers, because there are a few different modes in which you could use a model. Namely, you could either: (a) train a model or (b) make predictions with a model (controlled via the mode parameter); and you could additionally use a model either over (a) unsupervised (e.g., pre-training) or (b) supervised (e.g., fine-tuning) data (controlled via the dataset_type parameter). Let's see each of these modes in action with a hypothetical sequence of uses of the command to pre-train a model, then fine-tune it, then make predictions.

# 1. Pre-train a model on unsupervised data
meds-dev-model model=$MODEL_NAME dataset_dir=$DATASET_DIR mode=train dataset_type=unsupervised output_dir=$PRETRAINED_MODEL_DIR

# 2. Fine-tune a model on supervised data
meds-dev-model model=$MODEL_NAME dataset_dir=$DATASET_DIR labels_dir=$LABELS_DIR mode=train dataset_type=supervised output_dir=$FINETUNED_MODEL_DIR model_initialization_dir=$PRETRAINED_MODEL_DIR

# 3. Make predictions with a model for the held-out set:
meds-dev-model model=$MODEL_NAME dataset_dir=$DATASET_DIR labels_dir=$LABELS_DIR mode=predict dataset_type=supervised split=held_out output_dir=$PREDICTIONS_DIR model_initialization_dir=$FINETUNED_MODEL_DIR

Here, $MODEL_NAME is the name of the model you want to train within the MEDS-DEV ecosystem. You can see that the pre-trained model weights are passed to the fine-tuning stage via the model_initialization_dir parameter, and likewise for the fine-tuned model weights to the prediction stage.

[!Note] If you're a model creator, don't worry that you'll have to conform to this API -- this is just the API for model users, and internally MEDS-DEV wraps this API into whatever custom scripts and calls you need your model to take to train and predict. See the section below about "Contributing" for more details!

[!Note] You can also run the full suite of supported commands for a model in the right order, chaining directories as needed, using the mode=full and dataset_type=full options. This will run the full sequence of commands in 1-3 above, and store the intermediate results in subdirectories of the output directory.

Evaluating predictions

To evaluate the predictions of a model on a task, you can use the meds-evaluation helper:

meds-dev-evaluation predictions_dir=$PREDICTIONS_DIR output_dir=$EVALUATION_DIR

The output JSON file from MEDS-Evaluation will contain the results of the evaluation, including the AUROC, which is the primary metric for MEDS-DEV at this time.

Adding your result to MEDS-DEV

If you successfully run the sequence of stages above on a new dataset not yet included in MEDS-DEV -- let us know and we'll happily help you add your dataset's information (but no sensitive data) and these results to the public record to help advance the science of Health AI!

Contributing New Things to MEDS-DEV

[!Note] See the templates folder for templates for the README files for new tasks, datasets, or models!

Adding a dataset

To add a dataset, you will need to create a new directory under src/MEDS_DEV/datasets/ with the name of the dataset, containing the following files:

1. README.md: This file should contain a description of the dataset. See the templates for examples.
2. requirements.txt: This file should be a valid pip specification for what is needed to install the ETL to build the environment. The ETL must be runnable on Python 3.11.
3. commands.yaml: This file must have two shell command strings under the keys build_full and build_demo that, if run in an environment with the requirements installed, with the specified placeholder variables (indicated in python syntax, include temp_dir for intermediate files and output_dir for where you want the final MEDS cohort to live) will produce the desired MEDS cohort.
4. predicates.yaml contains ACES syntax predicates to realize the target tasks.

If all of these are defined, then you can, after installing MEDS-DEV via pip install -e ., run the command meds-dev-dataset dataset=DATASET_NAME output_dir=OUTPUT_DIR to generate the MEDS cohort for that dataset (with demo=True if you want the demo version).

Adding a task

To add a task, simply create a new task configuration file under src/MEDS_DEV/tasks with the desired (slash-separated) task name. The task configuration file should be a valid ACES configuration file, with the predicates left as placeholders to-be-overwritten by dataset-specific predicates. In addition, in the same series of folders leading to the task configuration file, you should have README.md files that describe what those "categories" of tasks mean.

Once a task is defined, then you can, after installing MEDS-DEV via pip install -e ., run the command meds-dev-task task=TASK_NAME dataset=DATASET_NAME output_dir=OUTPUT_DIR dataset_dir=DATASET_DIR to generate the labels for task TASK_NAME over dataset DATASET_NAME stored in the directory DATASET_DIR in the output directory OUTPUT_DIR.

For testing purposes, e.g., to ensure your task is correctly defined and supported by the expected datasets, you should also include the following information in a metadata block in your task config:

metadata:
  test_datasets:
    - MIMIC-IV
    - ...

where the list of datasets in metadata.test_datasets will be used to test the task automatically by the test set-up (against the demo version of that dataset only!)

Adding a model

To add a model, create a new subdirectory of src/MEDS_DEV/models/ with the name of the model. Then, within this subdirectory, create a requirements.txt, README.md, and model.yaml file. The requirements.txt contains the necessary Python packages to install to run the model, similar to dataset creation, the README.md contains a description of the model, and the model.yaml file contains some programmatic information about the model, including most critically a commands key with a dictionary of commands needed to run to train the model from scratch on a MEDS dataset.

A full description of these commands is coming soon, but for now, note that:

1. Commands can use the template variables {output_dir}, {dataset_dir}, {labels_dir}, and {demo}.
2. Commands should be added in a nested manner for running either over unsupervised or supervised datasets, in either train or predict modes. See the random predictors example for an example.

See the help string for meds-dev-model for more information. Note the final output predictions should be stored as a set of parquet files in the final output directory specified by the output_dir variable in the format expected by meds-evaluation.

Efficient Testing

To make testing more efficient during model / task development, you can use a local, persistent cache dir to avoid repeating the parts of the test setup you aren't changing. To do this, use the following command line arguments with pytest:

pytest --doctest-modules -s --persistent_cache_dir=$TEST_CACHE --cache_dataset='all' --cache_task='all'

Note that

1. The --persistent_cache_dir argument specifies the directory where the cache will be stored. It must be an existing directory on disk.
2. You can either specify --cache_dataset, --cache_task, and/or --cache_model with a list of specific datasets, models, or tasks to cache by using the argument multiple times with the specific names, or you can use 'all' to cache all datasets, models, or tasks, as is shown above.
3. The cached parts specified via the arguments will be stored in the persistent cache directory; other parts will be stored in temporary directories and deleted in between runs. Persistently cached parts will not be re-run, even if the associated code for that part is changed. So, you need to manually ensure that you are only caching things that won't change with your code.

You can also restrict the set of tasks, datasets, and models that you explore using the command line options --test_task, --test_dataset, and --test_model, respectively. These options can be used to run only the selected options (repeating the argument as needed, e.g., --test_task=task1 --test_task=task2). If they are omitted or if 'all' is specified as an option, then all allowed tests will be run.

Note that caching does not imply that test code will not be re-run -- instead, it just ensures that output files are stored on disk in the specified directory. For some aspects of MEDS-DEV, this means that test-code will be re-run and files replaced; for others, it will be re-used. This is a feature, not a bug, as it allows you to inspect output files while reliably re-testing code. However, if you want to fully re-use a component of a test, you can also specify the additional arguments: --reuse_cached_dataset, --reuse_cached_task, or --reuse_cached_model with the same syntax of the --cache_* and --test_* arguments. Then, the test code will explicitly mark the specified components within the persistent cache directory as "re-useable" and will not re-run the associated MEDS-DEV code pipelines in between test runs, but simply re-use the outputs.

Notes

1. Some models in this repo use Hugging Face Datasets objects. These cache data to disk in a directory you can control via the environment variable HF_DATASETS_CACHE. If you have disk space or security concerns about storage in the ordinary cache directory, you should set this variable manually to a desired directory in your terminal before running MEDS-DEV commands. See #144 for more details.