An audio library based on libsndfile, CFFI and NumPy
PySoundFile can read and write sound files. File reading/writing is supported through libsndfile, which is a free, cross-platform, open-source (LGPL) library for reading and writing many different sampled sound file formats that runs on many platforms including Windows, OS X, and Unix. It is accessed through CFFI, which is a foreign function interface for Python calling C code. CFFI is supported for CPython 2.6+, 3.x and PyPy 2.0+. PySoundFile represents audio data as NumPy arrays.
PySoundFile has evolved rapidly during the last few releases. Most notably, we changed the import name from import pysoundfile to import soundfile in 0.7. In 0.6, we cleaned up many small inconsistencies, particularly in the the ordering and naming of function arguments and the removal of the indexing interface.
In 0.8.0, we changed the default value of always_2d from True to False. Also, the order of arguments of the write function changed from write(data, file, ...) to write(file, data, ...).
In 0.9.0, we changed the ctype arguments of the buffer_* methods to dtype, using the Numpy dtype notation. The old ctype arguments still work, but are now officially deprecated.
PySoundFile depends on the Python packages CFFI and NumPy, and the system library libsndfile.
To install the Python dependencies, I recommend using the Anaconda distribution of Python 3. This will come with all dependencies pre-installed. To install the dependencies manually, you can use the conda package manager, which will install all dependencies using conda install cffi numpy (conda is also available independently of Anaconda with pip install conda; conda init).
With CFFI and NumPy installed, you can use pip install pysoundfile to download and install the latest release of PySoundFile. On Windows and OS X, this will also install the library libsndfile. On Linux, you need to install libsndfile using your distribution’s package manager, for example sudo apt-get install libsndfile1.
Data can be written to the file using soundfile.write(), or read from the file using soundfile.read(). PySoundFile can open all file formats that libsndfile supports, for example WAV, FLAC, OGG and MAT files.
Here is an example for a program that reads a wave file and copies it into an ogg-vorbis file:
import soundfile as sf data, samplerate = sf.read('existing_file.wav') sf.write('new_file.ogg', data, samplerate)
Sound files can also be read in short, optionally overlapping blocks with soundfile.blocks(). For example, this calculates the signal level for each block of a long file:
import numpy as np import soundfile as sf rms = [np.sqrt(np.mean(block**2)) for block in sf.blocks('myfile.wav', blocksize=1024, overlap=512)]
Sound files can also be opened as soundfile.SoundFile objects. Every SoundFile has a specific sample rate, data format and a set number of channels.
If a file is opened, it is kept open for as long as the SoundFile object exists. The file closes when the object is garbage collected, but you should use the soundfile.SoundFile.close() method or the context manager to close the file explicitly:
import soundfile as sf with sf.SoundFile('myfile.wav', 'r+') as f: while f.tell() < len(f): pos = f.tell() data = f.read(1024) f.seek(pos) f.write(data*2)
All data access uses frames as index. A frame is one discrete time-step in the sound file. Every frame contains as many samples as there are channels in the file.
Pysoundfile can usually auto-detect the file type of sound files. This is not possible for RAW files, though:
import soundfile as sf data, samplerate = sf.read('myfile.raw', channels=1, samplerate=44100, subtype='FLOAT')
Note that on x86, this defaults to endian='LITTLE'. If you are reading big endian data (mostly old PowerPC/6800-based files), you have to set endian='BIG' accordingly.
You can write RAW files in a similar way, but be advised that in most cases, a more expressive format is better and should be used instead.
If you have an open file-like object, Pysoundfile can open it just like regular files:
import soundfile as sf with open('filename.flac', 'rb') as f: data, samplerate = sf.read(f)
Here is an example using an HTTP request:
import io import soundfile as sf from urllib.request import urlopen url = "http://tinyurl.com/shepard-risset" data, samplerate = sf.read(io.BytesIO(urlopen(url).read()))
Note that the above example only works with Python 3.x. For Python 2.x support, replace the third line with:
from urllib2 import urlopen
- 2013-08-27 V0.1.0 Bastian Bechtold:
- Initial prototype. A simple wrapper for libsndfile in Python
- 2013-08-30 V0.2.0 Bastian Bechtold:
- Bugfixes and more consistency with PySoundCard
- 2013-08-30 V0.2.1 Bastian Bechtold:
- 2013-09-27 V0.3.0 Bastian Bechtold:
- Added binary installer for Windows, and context manager
- 2013-11-06 V0.3.1 Bastian Bechtold:
- Switched from distutils to setuptools for easier installation
- 2013-11-29 V0.4.0 Bastian Bechtold:
- Thanks to David Blewett, now with Virtual IO!
- 2013-12-08 V0.4.1 Bastian Bechtold:
- Thanks to Xidorn Quan, FLAC files are not float32 any more.
- 2014-02-26 V0.5.0 Bastian Bechtold:
- Thanks to Matthias Geier, improved seeking and a flush() method.
- 2015-01-19 V0.6.0 Bastian Bechtold:
A big, big thank you to Matthias Geier, who did most of the work!
- Switched to float64 as default data type.
- Function arguments changed for consistency.
- Added unit tests.
- Added global read(), write(), blocks() convenience functions.
- Documentation overhaul and hosting on readthedocs.
- Added 'x' open mode.
- Added tell() method.
- Added __repr__() method.
- 2015-04-12 V0.7.0 Bastian Bechtold:
Again, thanks to Matthias Geier for all of his hard work, but also Nils Werner and Whistler7 for their many suggestions and help.
- Renamed import pysoundfile to import soundfile.
- Installation through pip wheels that contain the necessary libraries for OS X and Windows.
- Removed exclusive_creation argument to write.
- Added truncate() method.
- 2015-10-20 V0.8.0 Bastian Bechtold:
Again, Matthias Geier contributed a whole lot of hard work to this release.
- Changed the default value of always_2d from True to False.
- Numpy is now optional, and only loaded for read and write.
- Added SoundFile.buffer_read and SoundFile.buffer_read_into and SoundFile.buffer_write, which read/write raw data without involving Numpy.
- Added info function that returns metadata of a sound file.
- Changed the argument order of the write function from write(data, file, ...) to write(file, data, ...)
And many more minor bug fixes.
- 2017-02-02 V0.9.0 Bastian Bechtold:
Thank you, Matthias Geier, Tomas Garcia, and Todd, for contributions for this release.
- Adds support for ALAC files.
- Adds new member __libsndfile_version__
- Adds number of frames to info class
- Adds dtype argument to buffer_* methods
- Deprecates ctype argument to buffer_* methods
- Adds official support for Python 3.6
And some minor bug fixes.
Release history Release notifications | RSS feed
Download the file for your platform. If you're not sure which to choose, learn more about installing packages.
Hashes for PySoundFile-0.9.0.post1-py2.py3.cp26.cp27.cp32.cp33.cp34.cp35.cp36.pp27.pp32.pp33-none-win_amd64.whl
Hashes for PySoundFile-0.9.0.post1-py2.py3.cp26.cp27.cp32.cp33.cp34.cp35.cp36.pp27.pp32.pp33-none-win32.whl
Hashes for PySoundFile-0.9.0.post1-py2.py3.cp26.cp27.cp32.cp33.cp34.cp35.cp36.pp27.pp32.pp33-none-macosx_10_5_x86_64.macosx_10_6_intel.macosx_10_9_intel.macosx_10_9_x86_64.whl
Hashes for PySoundFile-0.9.0.post1-py2.py3-none-any.whl