Toncalculator 0.1.0

A basic calculator

Toncalculator

It is a simple calulator for addition, subtraction, multiplication,division, squire, to the power, sqire root, log, factorial, sin, cos, tan, cot, sec, cosec, nCr etc. iThere are many mathmatical conversions.

How To Use

Installation:

Firstly you need to install the Toncalculator module by pip install Toncalculator command. Then you need to make a .py file or open python interpreter. Finally you can write you code.

Example

import toncalculator

toncalculator.add(2,6)

Codes:

Addition:

add() method is uaed to add two numbers add(x,y) the function needs two compulsoy parameter.

Example:

result(add(1,2))

Output: 3

Subtraction:

sub() method is used to subtract 1st parameter by 2nd parameter.

Example:

result(sub(2,1))

Output : 1  

Multiplication:

mul() methed is used to multiply two numberas.

Example:

result(mul(2,3))

Output : 6

Division:

div() method is used to divie 1st number by 2nd number.

Example:

result(dev(10,2))

Output : 5

Squre:

square() method is used to squire any numbers ```

Example:

result(square(2))

Output : 4

To The Power:

power() method is used as 2nd parameter to the power of 1st parameter.

Example:

result(power(2,4))

Output : 16

Square Root:

sqroot() method is used to square root a number.

Example:

result(sqroot(16))

Output : 4    

Log:

log() method returns the natural logarithm of a number, or the logarithm of number to base.

Syntx:

log(x, base)

Parameter Values

Parameter	Description
x	Required. Specifies the value to calculate the logarithm for. If the value is 0 or a negative number, it returns a ValueError. If the value is not a number, it returns a TypeError
base	Optional. The logarithmic base to use. Default is 'e'

Example:

result(log(10))

Output : 2.302585..............

Factorial:

The factorial() method returns the factorial of a number.

Note: This method only accepts positive integers.

The factorial of a number is the sum of the multiplication, of all the whole numbers, from our specified number down to 1. For example, the factorial of 6 would be 6 x 5 x 4 x 3 x 2 x 1 = 720

Syntx:

factorial(x)

Parameter Values:

Parameter	Description
x	Required. A positive integer. If the number is negative, or not an integer, it returns a ValueError. If the value is not a number, it returns a TypeError

Example:

result(factorial(3)):

Output : 6

Sin:

sin() method returns the sine of a number.

Note: To find the sine of degrees, it must first be converted into radians with the degTored() method (see example below).

Syntx:

sin(x)

Parameter Values:

Parameter	Description
x	Required. The number to find the sine of. If the value is not a number, it returns a TypeError

Example:

# It returns normally sin of 0 redian 
result(sin(0))
# sin() returns the sin of redian.
# degTored() convers dgree to redian 
result(sin(degTored(90)))

Output : 0 
Output : 1

Cos:

cos() method returns the cosine of a number.

Note: To find the cosine of degrees, it must first be converted into radians with the degTored() method (see example below).

Syntx:

cos(x):

Parameter Values:

Parameter	Description
x	Required. The number to find the sine of. If the value is not a number, it returns a TypeError

Example:

# It returns normally cosin of 0 redian 
result(cos(0))
# cos() returns the cosin of redian.
# degTored() convers dgree to redian 
result(cos(degTored(180)))

Output : 1
Output : -1

Tan:

tan() method returns the tangent of a number.

Note: To find the tan of degrees, it must first be converted into radians with the degTored() method (see example below).

Syntx:

tan(x):

Parameter Values:

Parameter	Description
x	Required. The number to find the tangent of. If the value is not a number, it returns a TypeError

Example:

# It returns normally tangent of 0 redian 
result(tan(0))
# tan() returns the cosin of redian.
# degTored() convers dgree to redian 
result(tan(degTored(10)))

Output : 0
Output : 0.176326......

Cot:

cot() method returns the cotangent of a number.

Note: To find the cotangent of degrees, it must first be converted into radians with the degTored() method (see example below).

Syntx:

cot(x)

Parameter Values:

Parameter	Description
x	Required. The number to find the cotangent of. If the value is not a number, it returns a TypeError

Example:

# It returns normally cotangent of 0 redian 
result(cot(0))
# cot() returns the cotangent of redian.
# degTored() convers dgree to redian 
result(cot(degTored(10)))

Output : Infinity
Output : 5.6712818196......

Sec:

sec() method returns the secant of a number.

Note: To find the secant of degrees, it must first be converted into radians with the degTored() method (see example below).

Syntx:

sec(x)

Parameter Values:

Parameter	Description
x	Required. The number to find the secant of. If the value is not a number, it returns a TypeError

Example:

# It returns normally secant of 0 redian 
result(sec(0))
# sec() returns the secant of redian.
# degTored() convers dgree to redian 
result(sec(degTored(180)))

Output : 1
Output : -1

Cosec:

cosec() method returns the secant of a number.

Note: To find the secant of degrees, it must first be converted into radians with the degTored() method (see example below).

Syntx:

sec(x)

Parameter Values:

Parameter	Description
x	Required. The number to find the cosecant of. If the value is not a number, it returns a TypeError

Example:

# It returns normally cosecant of 0 redian 
result(sec(0))
# cosec() returns the cosecant of redian.
# degTored() convers dgree to redian 
result(cosec(degTored(90)))

Output : Infinity
Output : 0

nCr:

nCr() method returns the nCr.

Note: return the combination is the method of selection of 'r' objects from a set of 'n' objects where the order of selection does not matter.

Syntx:

nCr(n,r)

Parameter Values:

Parameter	Description
n	Required. Type integer
r	Required. Type integer

result(nCr(9,3))

Output : 84

Mathmathical conversion

Angle Conversions

Dgree To Radian

degTored() method returns dgree to radian.

Syntx

degTored(x)

Parameter Values:

Parameter	Description
x	Required. x means x dgree

Example

result(degTored(180))
 
Output : 3.1416   

Radian To Dgree

redTodeg() method returns radian to dgree.

Syntx

redTodeg(x)

Parameter Values:

Parameter	Description
x	Required. x means x radian

Example

result(redTodeg(1))
 
Output : 57.297795

Dgree To Minute

degTomin() method returns dgree to minute.

Syntx

degTomin(x)

Parameter Values:

Parameter	Description
x	Required. x means x dgree

Example

result(degTomin(1))

Output : 60

Minute to Degree

minTodeg() method returns minute to dgree.

Syntx

minTodeg(x)

Parameter Values:

Parameter	Description
x	Required. x means x minute

Example

result(minTodeg(60))

Output : 1

Degree to Second

degTosec() method returns dgree to second.

Syntx

degTosec(x)

Parameter Values:

Parameter	Description
x	Required. x means x dgree

Example

result(degTosec(1))

Output : 3600

Second to Dgree

secTomin() method returns second to dgree.

Syntx

secTodeg(x)

Parameter Values:

Parameter	Description
x	Required. x means x second

Example

result(secTodeg(3600))

Output : 1

Minute to Second

minTosec() method returns minute to second .

Syntx

minTosec(x)

Parameter Values:

Parameter	Description
x	Required. x means x minute

Example

result(minTosec(1))

Output : 60

Second To Minute

secTomin() method returns second to minute.

Syntx

secTomin(x)

Parameter Values:

Parameter	Description
x	Required. x means x second

Example

result(secTomin(60))

Output : 1

Length Conversions

inches to centimeters

inTocm() method returns inches to centimeters.

Parameter Values:

Parameter	Description
x	Required. x means x inches

Example

result(inTocm(100))

Output : 254

centimeters to inches

cmToin() method returns inches to centimeters.

Parameter Values:

Parameter	Description
x	Required. x means x centimeters

Example

result(inTocm(254))

Output : 100

feet to meters

ftTom(x) method returns feet to meters.

Parameter Values:

Parameter	Description
x	Required. x means x feet

Example

result(ftTom(100))

Output : 30.48

feet to meters

mToft(x) method returns meters to feet.

Parameter Values:

Parameter	Description
x	Required. x means x meters

Example

result(mToft(1))

Output : 3.280839895013123

yard to meter

mToft(x) method returns yard to meter.

Parameter Values:

Parameter	Description
x	Required. x means x yard

Example

result(ydTom(1))

Output : 0.9144

meter to yard

mToft(x) method returns meter to yard.

Parameter Values:

Parameter	Description
x	Required. x means x meter

Example

result(ydTom(1))

Output : 1.0936132983377078

def mileTokm(x):
    #return x mile to kilometre
    return x/0.621367

def kmTomile(x):
    #return x kilometre to mile
    return x*0.621367

def n_mileTom(x):
    #return x notical mile to meter
    return x*1852

def mTon_mile(x):
    #return x meter to notical mile
    return x/1852

def pcTokm(x):
    #return x parsec to kilometre
    return x*3.08567758128E+13

def kmTopc(x):
    #return x kilometre to parsec
    return x/3.08567758128E+13

## Area Conversions ##
def acreTomsq(x):
    #return x acre to squire meter
    return x/0.000247105

def msqToacer(x):
    #return x squire meter to acre 
    return x*0.000247105

## Volume Conversions ##  
def galToL(x):
    #return x galon to liter you must select type here US or UK
    if type == "US" or "us" or "Us":
        return x*3.785412
    elif type == "Uk" or "UK" or "uk":
        return x*4.54609
    else:
        if type == None or type == "":
            print("[-] Error 404 type is empty")
        else:
            print("[-] Error you are not setected US or UK")

def LTogal(x):
    #return x liter to galon you must select type here US or UK
    if type == "US" or "us" or "Us":
        return x/3.785412
    elif type == "Uk" or "UK" or "uk":
        return x/4.54609
    else:
        if type == None or type == "":
            print("[-] Error 404 type is empty")
        else:
            print("[-] Error you are not setected US or UK")

## Mass Conversions ##
def ozTog(x):
    #return x ounces to grams
    return x*28.34952 

def gTooz(x):
    #return x grams to ounces   
    return x/28.34952

def lbTokg(x):
    #return x pounds to kilograms
    return x*0.45359237 

def kgTolb(x):
    #return x kilograms to pounds
    return x/0.45359237 

## Velocity Conversions ##
def kmphTomps(x):
    #return x kilometre/hour to meter/second
    m = x*1000
    s = 3600
    return m/s

def mpsTokmph(x):
    #return x meter/second to kilometre/hour
    km = x/1000
    h = 1/3600
    return km/h

## Pressure Conversions ##

def atmToPa(x):
    #retunrn x atmosphere to pascal
    return x*101325

def PaToatm(x):
    #return x pascal to atmosphere
    return x/101325

def mmHgToPa(x):
    #return x millimetre of mercury to pascal
    return x*133.322365 

def PaTommHg(x):
    #return x pascal to millimetre of mercury
    return x/133.322365 

## Energy Conversions ##
def kgfToJpm(x):
    #return Kilogram-force to Joule/meter 
    return x*9.80665 

def JpmTokgf(x):
    #return Joule/meter to Kilogram-force
    return x/9.80665

def JTocal(x):
    #return Joule to Calories
    return x*4.184

def calToJ(x):
    #return Calories to Joule
    return x/4.184

## Power Conversions ##
def hpToKW(x):
    #return Horse Power to kilowatt
    KW = {
        "mechanical": x/745.699872,
        "electrical" : x/746,
        "metric" : x/0.73549875
    }
    return KW

def KWTohp(x):
    #return Horse kilowatt to Power 
    hp = {
        "mechanical": x/745.699872,
        "electrical" : x/746,
        "metric" : x/0.73549875
    }
    return hp

## Temperature Conversions ##
def FtoC(f):
    #return fahrenheit to celsius
    return ((f-32)*5)/9

def CtoF(c):
    #return celsius to fahrenheit
    return ((9*c)/5)+32
    

Change Log

0.1.0 (20/06/2021) -Sixth Release

Added

New

version() - method info() - method

Physics Math

New type of calculation of basic physics

Moefied

galtoL() - method Ltogal() - method