TracerLL

TracerLL is a Python package with C++ extension modules for high-performance embedded tracing control.

The native code is built with CMake through scikit-build-core and pybind11. USB serial transport and COBS framing are implemented in C++, so Python users read and write decoded message payloads directly. Incoming frames that exceed the receive limit are discarded through the next delimiter to restore framing.

Requirements

• Python 3.12 or newer (CI tests 3.12–3.15 on Linux, and 3.15 on macOS/Windows)
• CMake 3.16 or newer
• A C++20 compiler
• Git, used by CMake FetchContent to fetch IntegralMotions/IntegralCommunication

Python build dependencies are declared in pyproject.toml and installed by pip during build isolation.

Create A Development Environment

python3 -m venv .venv
source .venv/bin/activate
python -m pip install --upgrade pip
python -m pip install pybind11 scikit-build-core pytest build

You can also install the same development dependencies through the Makefile:

make setup

Build And Install

Install the package into the active environment:

python -m pip install .

For local development, use editable mode:

python -m pip install -e .

Both commands build the C++ extension modules with CMake. The build downloads the pinned IntegralCommunication commit declared in CMakeLists.txt.

Run Tests

After installing the package into the active environment, run:

python -m pytest tests

The test suite covers:

• Tracer object construction and basic API behavior
• Embedded tracer protocol parsing and subscriptions

Virtual serial integration test

The integration test connects to the virtual trace device from IntegralEmbeddedTracing/examples. Start it with make example in that repository, then use its printed serial port here:

TRACER_SERIAL_TEST=1 TRACER_SERIAL_PORT=/dev/ttys016 python -m pytest -v tests/integration/test_serial_tracing.py

The port defaults to /dev/ttys016, but pseudo-terminal names can change; verify the printed path before running the test. This test sends commands, so do not run it against a real device or a port in use by another client. It is skipped during normal test runs unless TRACER_SERIAL_TEST=1 is set.

CI runs the normal test suite and a separate virtual-serial integration job on macOS, Linux, and Windows. The integration job checks out IntegralMotions/IntegralEmbeddedTracing at feature/add-integration-test-code and builds its example; that branch must include the serial example and Windows COM-port support. On Windows it installs a checksum-pinned com0com driver and uses a virtual COM pair. Driver installation and physical COM-port behavior depend on the runner and hardware respectively.

The Windows integration job also runs the native concurrency and buffer tests against that COM pair using pyserial for the test peer. To run them locally, install pyserial and set TRACER_TEST_PORT_A and TRACER_TEST_PORT_B to the two ends of an unused virtual COM pair before running python -m pytest -v tests/test_native_concurrency.py.

VS Code clangd

This project uses CMake FetchContent for IntegralCommunication. Configure CMake once so clangd can read the generated compile database:

python -m pip install pybind11 scikit-build-core
cmake --preset clangd

VS Code is configured to read:

build/clangd/compile_commands.json

After regenerating the compile database, restart clangd from the VS Code command palette with clangd: Restart language server.

Build A Wheel

To build a distributable wheel:

python -m pip install build
python -m build --wheel

The wheel is written to dist/.

Versioning

The package version is defined in one place:

[project]
version = "0.4.0"

Update the version field in pyproject.toml when preparing a release. CMake reads that value during configure, so the native build and Python package metadata stay in sync.

Usage

High-level trace client

EmbeddedTracer discovers scalar variables and starts tracing them using the current IntegralEmbeddedTracing protocol. Its transport handles COBS; the Python client validates protocol CRCs and interprets trace values.

from TracerLL import EmbeddedTracer

tracer = EmbeddedTracer("/dev/ttyUSB0", 115200)
try:
    tracer.connect()
    print(tracer.get_variable_config())
    tracer.subscribe("current_u", lambda value: print(value))
    tracer.start_trace(["current_u", "counter"])
    # Use tracer.values["current_u"] to read the most recent value.
    tracer.unsubscribe("current_u")
    tracer.stop_trace()
finally:
    tracer.close()

Callbacks run on a background reader thread and should return quickly. The client starts all discovered scalar variables by default, or the specified names (up to 64). All discovered names remain available in the configuration; values for unselected variables remain None until they have been traced. Call stop_trace() and then start_trace() to change the selection without closing the connection. Array tracing is not yet supported. This is a partial replacement for the old MotorDriverDesktop/Tracer client, whose legacy wire format is not compatible with the current protocol.

Low-level transport

from TracerLL import Tracer

tracer = Tracer.Tracer("/dev/ttyUSB0", 115200)

if tracer.start():
    tracer.write_message(b"hello")
    messages = tracer.get_messages()
    tracer.stop()

On Windows, pass the COM port name:

tracer = Tracer.Tracer("COM10", 115200)

Tracer.write_message(...) accepts bytes or a sequence of integer byte values. get_messages() returns lists of integer byte values. Message framing is COBS-based internally. On Linux, supported baud rates are 9600, 19200, 38400, 57600, 115200, 230400, 460800, and 921600.

The receive queue holds up to 1024 messages by default. Set the optional receive_queue_capacity constructor argument to change the limit. New messages are dropped when full; dropped_messages() returns a cumulative, saturating count. The count survives stop/start, while queued messages are cleared on start. EmbeddedTracer.dropped_messages() exposes the same count.

write_message() returns True only when the complete encoded frame is accepted by the serial transport. A failure may leave a partial frame on the wire, so further writes fail until stop() and start(); the peer may also need to be reset or resynchronized. This does not guarantee peer delivery or processing. The high-level client raises OSError when a request write fails.

Concurrent writes and start/stop calls are serialized. Writes use a one-second deadline; stop() waits for an in-progress write and the reader thread. On Windows, an OS or driver that fails to complete cancellation may delay shutdown beyond the deadline. Coordinate shutdown with producers.

Modules

• TracerLL.Tracer: USB serial tracer using COBS-framed communication.
• TracerLL.EmbeddedTracer: high-level embedded tracing client.