Overview
This package provides a graphical interface called the A3EM Management Dashboard, which should be used for setup and preparation of all live A3EM deployments. Once installed, it can be accessed from any location in a command terminal by entering:
a3em
Installation
The easiest way to install this tool is through pip by entering:
python3 -m pip install a3em
If you wish to install the package manually or develop it further, you should first clone the A3EM Dashboard repository to your hard drive, cd into the root directory of the repository, then issue the following command in a terminal:
python3 -m pip install -e .
Upon configuration and completion of a deployment, all audio and log files should be properly labeled and accessible on the SD card of the deployed A3EM device.
Available Configuration Options
TODO: Finish this list and add descriptions
- Deployment Options:
Device Label
Timezone
Start Date and Time
End Date and Time (optional)
Set RTC to Start Date/Time at Magnet Detect (yes/no)
LEDs enabled (yes/no)
- If LEDs enabled:
For how many seconds after deployment starts
VHF Radio Start Date and Time
- Audio Recording Options:
Mode: Threshold-Triggered, Time-Scheduled, Interval-Scheduled, Continuous
- If Threshold-Triggered:
Max num events per unit time
Threshold level (right now in percent of max, but prob should map dB to percent)
- If Time-Scheduled:
List of start/end times (i.e., 6AM-11AM, 6PM-10PM)
- If Interval-Scheduled:
Record every X time units
Clip length in seconds (even for continuous, should segment into clips)
Extend clip length if continuous audio detected (yes/no)
Audio sampling rate
Microphone amplification level (low, medium, high)
- IMU Recording Options:
Mode: Threshold-Triggered, Audio-Triggered (store IMU data whenever audio clip is recording)
- If Threshold-Triggered:
Threshold level
Degrees of Freedom (only 3 available on current chip)
IMU sampling rate
Metadata
Release files for a3em 1.0.6
For a detailed explanation of source distributions (sdists) and built distributions (wheels), please see the package formats documentation.
Source distribution (sdist)
| File | Size | Uploaded | |
|---|---|---|---|
| a3em-1.0.6.tar.gz | 116.4 kB | Details |
Built distribution (wheel)
| File | Interpreter | ABI | Platform | Reset |
|---|---|---|---|---|
| a3em-1.0.6-py3-none-any.whl | Python 3 | none | any | Details |
Total release size: 233.3 kB
Release files / a3em-1.0.6.tar.gz
| Download URL | a3em-1.0.6.tar.gz |
|---|---|
| Size | 116.4 kB |
| Tags | Source |
|
SHA-256 checksum How to use checksums |
1907721de7dd2279d52ed1855dd597bcc64e6b456bb50572b71a889ddf9ce619
|
|
BLAKE2b-256 checksum How to use checksums |
0a0621600e3bec8ef19911399e9150aeb485df73e91361c31900cae37e620d41
|
| Upload date | |
|
Uploaded using Trusted Publishing? What is trusted publishing? |
No |
| Uploaded via |
twine/6.2.0 CPython/3.14.2
|
Release files / a3em-1.0.6-py3-none-any.whl
| Download URL | a3em-1.0.6-py3-none-any.whl |
|---|---|
| Size | 116.9 kB |
| Tags | Python 3 |
|
SHA-256 checksum How to use checksums |
ed352f7894b5e7e37655cfedba62ec867e099fb73a280730a68d082dc4a96a72
|
|
BLAKE2b-256 checksum How to use checksums |
b0dd173f4a73b0feb550ffe6be9918f44352a13040dd3d6e4e0066a89e1d1fb5
|
| Upload date | |
|
Uploaded using Trusted Publishing? What is trusted publishing? |
No |
| Uploaded via |
twine/6.2.0 CPython/3.14.2
|