absnoise

How well can a superconducting junction measure temperature? In a proximity Josephson junction, the discrete Andreev states that carry the supercurrent flicker between occupied and empty even in perfect equilibrium, and that flicker -- not the readout electronics -- is what ultimately limits the sensor. absnoise computes the whole chain: the level structure, the size and speed of the occupation flicker, and the resulting temperature, frequency-noise and single-photon energy resolutions of a real device. It also works backward from measured data: critical-current curves, readout time traces, and noise spectra.

Install

pip install absnoise

For development: clone the repository and pip install -e .[test].

Predict a device budget

import numpy as np
from absnoise import RECIPES, SensorBudget

budget = SensorBudget(RECIPES[1])          # Ti/Al/Au recipe, Jung et al.
T = 0.3 * budget.recipe.Tc                 # operating temperature (K)
tauA = 1e-6                                # occupation correlation time (s)

achieved, sums = budget.dT_andreev(T, tauA, t=1.0)
Sy, Snu = budget.freq_noise_spectrum(T, tauA, np.array([0.0, 1e3, 1e6]))
sigE = budget.energy_resolution(T, tauA)

Units are SI throughout; PSDs are single-sided with the convention var(t-average) = S(0)/(2t), validated by Monte Carlo in the tests.

Analyze your own measurements (v0.4-v0.7)

The three standard data products of these experiments each have a dedicated inverse tool, and the files enter through documented contracts (load_ic_csv, load_trace_csv, new in v0.7) that refuse malformed input and flag likely unit mix-ups (millikelvin entered as kelvin, microamps entered as amps) instead of silently rescaling:

• Critical current vs temperature -> fit_ic_curve: fits the package's own junction model to a measured Ic(T) curve. The shape of the suppression identifies the transparency; with measurement sigmas you get an exact covariance and a chi-square check, and a curve that never leaves its low-temperature plateau triggers a warning that the parameters are weakly determined. IcFit.to_recipe packages the result so every budget in the package applies to your junction.
• Readout time trace -> fit_hmm: a hidden-Markov decoder returns the posterior occupation at every sample, the most probable state path, and maximum-likelihood rates -- from the raw trace alone.
• Noise spectrum -> fit_telegraph_psd (new in v0.7): when the dynamics are too fast to resolve in time, the spectrum still carries them. Fits the Lorentzian occupation-noise model S0/(1 + (2 pi f tau)^2) + floor and returns the plateau, the correlation time and the background with uncertainties -- and REFUSES a frequency band that never sees the knee, because such a band cannot determine tau, instead of returning one of a continuum of answers.

allan_variance and avar_exponential answer the practical stability question -- how long is it worth averaging -- with the closed form this package's own noise obeys, checked against its defining integrals and Monte Carlo.

What is inside the physics engine

• The exact finite-length Andreev spectrum from its closed-form secular equation, and the closed-form short-junction ensemble: current-phase relation, critical current, Josephson inductance, responsivities, noise sums, heat capacity.
• The BCS gap Delta(T) solved from the gap equation itself, because the widely used interpolation formula misrepresents its low-temperature slope.
• The Cauchy-Schwarz temperature-resolution bound var(T) >= 2 kB T^2 tauA / (C_A t), with the level-resolved sums that show when it saturates.
• A four-state master equation for the pair processes, telegraph Monte Carlo, and the continuum (above-gap) contribution to the occupation heat capacity, cross-validated through an independent code path.
• Detector budgets: phonon thermal-fluctuation noise, resonator frequency-noise spectra, matched-filter energy resolution, and (new in v0.8) the frequency-resolved noise-equivalent power NEP(f) per channel in closed form -- the phonon channel exactly flat at Mather's 4 kB T^2 G (Appl. Opt. 1982), the occupation channel's Lorentzian cancelling exactly against its own lag; the matched-level design condition, the nonlinear single-photon click response, and a two-temperature (electron + local phonon) click model whose phonon parameters must be measured, not invented.

Cited constants

Six junction recipes ship with full provenance (Table I of W. Jung et al., Phys. Rev. Applied 26, 014078 (2026), arXiv:2503.06850); graphene electron-phonon cooling follows G.-H. Lee et al., Nature 586, 42 (2020); physical constants are CODATA 2018. The test suite locks every recipe number to its source; a replacement must arrive with a new source. No phonon-stack parameters are shipped at all -- they are measurements of a real device, and calls without them raise.

How it is checked

72 tests (Python 3.9-3.13, run in CI on every push), every physics claim anchored to a closed form, an exact identity, or two independent code paths -- never a stored number. Highlights: the short-junction limit to 1e-12 and Kulik levels to 1e-10; the BCS midpoint and both asymptotes; exact saturation (and non-violation) of the resolution bound; the master equation's exact singles limit and sum rules; Monte-Carlo validation of every spectrum and of the Allan closed form; energy conservation of the click integrator to machine precision; EM log-likelihood monotonicity in the decoder; exact noise-free recovery in both fitters, with Monte-Carlo scatter matching the reported sigmas; the PSD fit's variance tied to the generating traces by Parseval; and exact file-contract round trips.

Deliberate scope, designed out with reasons: the continuum occupation noise would need a correlation-time model with material parameters this package refuses to invent (its thermodynamic weight IS computed); and the phonon subsystem is one lumped temperature, because a nonthermal phonon model has no cited parameters at these scales.

Methodological basis

T. M. Mahim, A. S. M. Mohsin and M. M. Rahman, "Andreev occupation noise sets the sensitivity limit of proximity Josephson thermal detectors"; code for the paper: https://github.com/Tanvir-Mahmud-Mahim/andreev-occupation-noise

This package is the general-purpose engine; the paper repository reproduces the specific study.

Support and governance

Written and maintained by Tanvir Mahmud Mahim (Department of Electrical and Electronic Engineering, BRAC University), who reviews every change and takes the final decision on scope and releases. Design questions are discussed in the open in issues and pull requests, and the standing rule of CONTRIBUTING.md binds the maintainer exactly as it binds contributors: a change that touches physics arrives with a test, and a constant arrives with its source.

Support runs through the issue tracker. Usage questions are welcome alongside bug reports; a docstring that left a unit or a sign convention unclear is treated as a documentation bug, not user error. While the version is below 1.0 the API may still move between minor versions; such changes are called out in the release notes.

License

Apache-2.0. Every release is archived on Zenodo under the concept DOI 10.5281/zenodo.22048608, which always resolves to the latest version.