adafruit-circuitpython-ads1x15 3.0.4

CircuitPython library for controlling an ADS1x15 ADC.

Introduction

Support for the ADS1x15 series of analog-to-digital converters. Available in 12-bit (ADS1015) and 16-bit (ADS1115) versions.

Installation & Dependencies

This driver depends on:

• Adafruit CircuitPython

• Bus Device

Please ensure all dependencies are available on the CircuitPython filesystem. This can be most easily achieved by downloading and installing the Adafruit library and driver bundle on your device.

Installing from PyPI

On supported GNU/Linux systems like the Raspberry Pi, you can install the driver locally from PyPI. To install for current user:

pip3 install adafruit-circuitpython-ads1x15

To install system-wide (this may be required in some cases):

sudo pip3 install adafruit-circuitpython-ads1x15

To install in a virtual environment in your current project:

mkdir project-name && cd project-name
python3 -m venv .venv
source .venv/bin/activate
pip3 install adafruit-circuitpython-ads1x15

Usage Example

Single Ended

import time

import board

from adafruit_ads1x15 import ADS1015, AnalogIn, ads1x15

# Create the I2C bus
i2c = board.I2C()

# Create the ADC object using the I2C bus
ads = ADS1015(i2c)

# Create single-ended input on channel 0
chan = AnalogIn(ads, ads1x15.Pin.A0)

# Create differential input between channel 0 and 1
# chan = AnalogIn(ads, ads1x15.Pin.A0, ads1x15.Pin.A1)

print("{:>5}\t{:>5}".format("raw", "v"))

while True:
    print("{:>5}\t{:>5.3f}".format(chan.value, chan.voltage))
    time.sleep(0.5)

Documentation

API documentation for this library can be found on Read the Docs.

For information on building library documentation, please check out this guide.

Contributing

Contributions are welcome! Please read our Code of Conduct before contributing to help this project stay welcoming.