adafruit-circuitpython-mcp3xxx 1.5.1

CircuitPython library for the MCP3xxx Analog-to-Digital converters.

Introduction

CircuitPython library for the MCP3xxx series of analog-to-digital converters.

Currently supports:

• MCP3008: 8-Channel 10-Bit ADC With SPI Interface

Dependencies

This driver depends on:

• Adafruit CircuitPython

• Bus Device

Please ensure all dependencies are available on the CircuitPython filesystem. This is easily achieved by downloading the Adafruit library and driver bundle.

Installing from PyPI

On supported GNU/Linux systems like the Raspberry Pi, you can install the driver locally from PyPI. To install for current user:

pip3 install adafruit-circuitpython-mcp3xxx

To install system-wide (this may be required in some cases):

sudo pip3 install adafruit-circuitpython-mcp3xxx

To install in a virtual environment in your current project:

mkdir project-name && cd project-name
python3 -m venv .venv
source .venv/bin/activate
pip3 install adafruit-circuitpython-mcp3xxx

Usage Example

MCP3008 Single Ended

import busio
import digitalio
import board
import adafruit_mcp3xxx.mcp3008 as MCP
from adafruit_mcp3xxx.analog_in import AnalogIn

# create the spi bus
spi = busio.SPI(clock=board.SCK, MISO=board.MISO, MOSI=board.MOSI)

# create the cs (chip select)
cs = digitalio.DigitalInOut(board.D5)

# create the mcp object
mcp = MCP.MCP3008(spi, cs)

# create an analog input channel on pin 0
chan = AnalogIn(mcp, MCP.P0)

print('Raw ADC Value: ', chan.value)
print('ADC Voltage: ' + str(chan.voltage) + 'V')

MCP3008 Differential

import busio
import digitalio
import board
import adafruit_mcp3xxx.mcp3008 as MCP
from adafruit_mcp3xxx.analog_in import AnalogIn

# create the spi bus
spi = busio.SPI(clock=board.SCK, MISO=board.MISO, MOSI=board.MOSI)

# create the cs (chip select)
cs = digitalio.DigitalInOut(board.D5)

# create the mcp object
mcp = MCP.MCP3008(spi, cs)

# create a differential ADC channel between Pin 0 and Pin 1
chan = AnalogIn(mcp, MCP.P0, MCP.P1)

print('Differential ADC Value: ', chan.value)
print('Differential ADC Voltage: ' + str(chan.voltage) + 'V')

MCP3004 Single-Ended

import busio
import digitalio
import board
import adafruit_mcp3xxx.mcp3004 as MCP
from adafruit_mcp3xxx.analog_in import AnalogIn

# create the spi bus
spi = busio.SPI(clock=board.SCK, MISO=board.MISO, MOSI=board.MOSI)

# create the cs (chip select)
cs = digitalio.DigitalInOut(board.D5)

# create the mcp object
mcp = MCP.MCP3004(spi, cs)

# create an analog input channel on pin 0
chan = AnalogIn(mcp, MCP.P0)

print('Raw ADC Value: ', chan.value)
print('ADC Voltage: ' + str(chan.voltage) + 'V')

MCP3004 Differential

import busio
import digitalio
import board
import adafruit_mcp3xxx.mcp3004 as MCP
from adafruit_mcp3xxx.analog_in import AnalogIn

# create the spi bus
spi = busio.SPI(clock=board.SCK, MISO=board.MISO, MOSI=board.MOSI)

# create the cs (chip select)
cs = digitalio.DigitalInOut(board.D5)

# create the mcp object
mcp = MCP.MCP3004(spi, cs)

# create a differential ADC channel between Pin 0 and Pin 1
chan = AnalogIn(mcp, MCP.P0, MCP.P1)

print('Differential ADC Value: ', chan.value)
print('Differential ADC Voltage: ' + str(chan.voltage) + 'V')

Documentation

API documentation for this library can be found on Read the Docs.

For information on building library documentation, please check out this guide.

Contributing

Contributions are welcome! Please read our Code of Conduct before contributing to help this project stay welcoming.