adafruit-circuitpython-opt4048 1.1.1

CircuitPython driver library for the Adafruit OPT4048 breakout board, a high-speed, high-precision tristimulus XYZ color sensor.

Introduction

CircuitPython driver library for the Adafruit OPT4048 breakout board, a high-speed, high-precision tristimulus XYZ color sensor.

Dependencies

This driver depends on:

• Adafruit CircuitPython

• Bus Device

• Register

Please ensure all dependencies are available on the CircuitPython filesystem. This is easily achieved by downloading the Adafruit library and driver bundle or individual libraries can be installed using circup.

Adafruit OPT4048 Tri-Stimulus XYZ Color and Lux Sensor

Installing from PyPI

On supported GNU/Linux systems like the Raspberry Pi, you can install the driver locally from PyPI. To install for current user:

pip3 install adafruit-circuitpython-opt4048

To install system-wide (this may be required in some cases):

sudo pip3 install adafruit-circuitpython-opt4048

To install in a virtual environment in your current project:

mkdir project-name && cd project-name
python3 -m venv .venv
source .env/bin/activate
pip3 install adafruit-circuitpython-opt4048

Installing to a Connected CircuitPython Device with Circup

Make sure that you have circup installed in your Python environment. Install it with the following command if necessary:

pip3 install circup

With circup installed and your CircuitPython device connected use the following command to install:

circup install adafruit_opt4048

Or the following command to update an existing version:

circup update

Usage Example

import time
from time import sleep

import board

from adafruit_opt4048 import OPT4048, ConversionTime, Mode, Range

i2c = board.I2C()  # uses board.SCL and board.SDA
# i2c = board.STEMMA_I2C()  # For using the built-in STEMMA QT connector on a microcontroller
sensor = OPT4048(i2c)

sensor.range = Range.AUTO
sensor.conversion_time = ConversionTime.TIME_100MS
sensor.mode = Mode.CONTINUOUS
while True:
    x, y, lux = sensor.cie
    print(f"CIE x:{x}, y:{y}, lux: {lux}", end=" ")
    print(f"K: {sensor.calculate_color_temperature(x,y)}")
    time.sleep(1)

Documentation

API documentation for this library can be found on Read the Docs.

For information on building library documentation, please check out this guide.

Contributing

Contributions are welcome! Please read our Code of Conduct before contributing to help this project stay welcoming.