adafruit-circuitpython-tmp117 1.2.0

CircuitPython library for the TI TMP117 Temperature sensor

Introduction

CircuitPython library for the TI TMP117 and TMP119 Temperature sensors

WARNING: Library may not run on some boards with less RAM such as boards using the SAMD21

Dependencies

This driver depends on:

• Adafruit CircuitPython

• Bus Device

• Register

Please ensure all dependencies are available on the CircuitPython filesystem. This is easily achieved by downloading the Adafruit library and driver bundle.

Installing from PyPI

On supported GNU/Linux systems like the Raspberry Pi, you can install the driver locally from PyPI. To install for current user:

pip3 install adafruit-circuitpython-tmp117

To install system-wide (this may be required in some cases):

sudo pip3 install adafruit-circuitpython-tmp117

To install in a virtual environment in your current project:

mkdir project-name && cd project-name
python3 -m venv .venv
source .venv/bin/activate
pip3 install adafruit-circuitpython-tmp117

Usage Example

import time
import board
import adafruit_tmp117

i2c = board.I2C()  # uses board.SCL and board.SDA
tmp117 = adafruit_tmp117.TMP117(i2c)

while True:
    print("Temperature: %.2f degrees C"%tmp117.temperature)
    time.sleep(1)

Documentation

API documentation for this library can be found on Read the Docs.

For information on building library documentation, please check out this guide.

Contributing

Contributions are welcome! Please read our Code of Conduct before contributing to help this project stay welcoming.