agentpack-cli 0.1.11

Token-aware context packing for AI coding agents — Claude, Cursor, Windsurf, and Codex

AgentPack

Status: alpha (v0.1.9). Works, tested, used in real sessions. Python and JavaScript/TypeScript are the best-supported languages. Not yet validated across a wide range of repos. API may change before 1.0.

Platform note: macOS and Linux are fully supported. Windows support is not yet implemented (git hooks use POSIX shell; the Claude Code session hooks use python3/rm -f). Contributions welcome.

Token-aware context packing for AI coding agents.

---

The problem

Every time you start a task with an AI coding agent, it has no idea what's in your repo. It either:

1. Reads files on demand (Claude Code, Cursor, Windsurf) — dozens of tool calls, paying exploration cost every session, every turn, forever.
2. Gets the whole repo dumped in (repomix, gitingest) — 50k–500k tokens of noise, most of it irrelevant to the task at hand.
3. Gets nothing — you hand-copy the 5 files you think matter and hope you got it right.

None of these scale. On a 200-file codebase, option 1 wastes 5–10 turns just orienting. Option 2 degrades output quality (LLMs perform worse on long noisy context). Option 3 misses critical dependencies and configs constantly.

The root cause: agents don't know what's relevant to your current task without doing the work to figure that out — which costs tokens, time, and money on every session.

---

The solution

AgentPack solves this with a one-time offline analysis pass:

1. Scans your repo once — builds a summary cache of every file (signatures, imports, responsibilities). No API calls. Takes a few seconds.
2. On each task — uses git diff + import graph traversal + keyword scoring to rank every file by relevance to what you're working on.
3. Packs a tight context document — changed files get full content, dependencies get summaries, everything else gets dropped. Typically 8k–20k tokens for a 200-file repo.
4. Stays current — auto-repacks silently on commit, so next session starts fresh.

The result: your agent starts every session with a focused, accurate picture of the relevant code — without you doing anything after opt-in.

pip install agentpack-cli

# One-time setup per project
cd your-project
agentpack init             # creates config, session, task.md — nothing else needed
agentpack install          # auto-detects your IDE (optional but recommended)

# Every terminal session
agentpack watch            # keeps context fresh automatically — that's it

Then open Claude Code / Cursor / Windsurf / Codex / Antigravity and write your task normally. AgentPack keeps .agentpack/context.md current.

For power users who want background repacking on every commit and cd:

# Advanced: global automation (opt-in repos only — never touches repos without .agentpack/)
agentpack global-install --dry-run   # preview first
agentpack global-install

Supported agents: Claude Code, Cursor, Windsurf, Codex, Antigravity (Google), or any LLM.

---

AgentPack Results (7 days, 21 sessions)

Token Compression

Metric	Value
Sessions	21
Avg compression	99.3%
Min / Max	98.7% → 99.9%
Total raw (theoretical)	116.9M tokens
Total packed (actual)	683K tokens

Per session: ~4.1M raw repo → ~35K packed context.

Cost (Sonnet 4.6, input tokens only)

Scenario	Cost
Full repo dumped each run	~$350
With AgentPack	~$2.05
Realistic (10% manual cherry-pick baseline)	~$33 saved

Honest note: raw_tokens = full repo estimate. Real savings depend on how much context you'd pass manually. Compression ratio (99%+) is verifiable; dollar figure is scenario-dependent.

Quality Signal

• 42 commits in 7 days (~6/day) vs 4.9/day before
• Shift from single-file fixes → multi-system coordinated fixes
• AgentPack provides dependent files + callers in context → fixes root cause, not symptom
• Correlation observed, causation not isolated

---

When it helps

Workflow	Value
Claude API calls without tool use	High — pack is the only context the model sees
CI: generate pack per PR, attach as artifact	High — reviewers get instant focused context
Cursor / Windsurf / Codex / Antigravity sessions	Medium — context auto-injected on startup, repacked on commit
Large repos (>50k tokens) where exploration is slow	Medium — summary cache eliminates repeated file reads
Claude Code interactive session, small repo	Low — Claude reads files on demand already

---

How it compares to alternatives

The honest version.

repomix / gitingest / code2prompt

These are repo dumpers. They pack a repo (or subset) into a file and hand it to you. They do that job well.

What they don't do: decide what's relevant to your task. You specify the scope — files, globs, directories — and they package your decision. If you want "only the files that matter for fixing this auth bug", you have to figure that out yourself. On a 200-file repo, that's 80% of the work.

AgentPack does that selection automatically. You give it a task string; it uses git diff, import graph traversal, and keyword scoring to rank every file, then cuts to fit your token budget. You don't touch globs.

The other difference: all three pack uniformly (full content or nothing). AgentPack is selective by inclusion mode — changed files get full content, unchanged deps get summaries, unrelated files get dropped. A repomix dump of a 50k-token repo stays 50k tokens. An agentpack of the same repo for a specific task is typically 8k–20k.

Use repomix/gitingest if: you want to dump an entire small repo into a chat UI for a one-shot question. Zero setup, great for "explain this codebase."

Use agentpack if: you're running repeated tasks on a large repo and want automatic, task-driven file selection every time.

aider

Different category. Aider is an interactive pair programmer — it reads, edits, and commits files directly. Its repo-map is genuinely smart. If you want an AI coding assistant making actual edits, aider is excellent.

AgentPack is not a coding assistant. It's a context preparation tool. The output is a markdown file you can pass as context.

Use aider if: you want interactive, supervised AI coding sessions in a terminal.

Use agentpack if: you're working on large repos and want automatic, task-driven file selection — CI, scripts, batch workflows, or interactive sessions.

Claude Code / Cursor / Windsurf / Codex (agentic IDEs)

These tools have native file access via tool calls. Claude reads exactly the files it needs, on demand, per turn. Pre-packing context adds overhead without much benefit on small-to-medium repos.

AgentPack's value here is different: agentpack install --agent <x> configures your agent to auto-inject a ranked context pack on session start and auto-repack whenever you commit. On large repos where tool-call exploration piles up across turns, this front-loads the cost once instead of paying per-turn.

Where agentpack genuinely wins

Scenario	repomix	gitingest	code2prompt	aider	agentpack
API call without tool use	✓ dump	✗	✓	✗	✓ task-filtered
CI per-PR context	✓ dump	✗	✓	✗	✓ task-filtered
Auto task inference from git	✗	✗	✗	partial	✓
Relevance ranking by task	✗	✗	✗	✗	✓
Import graph traversal	✗	✗	✗	✓	✓
Token budget enforcement	manual	manual	manual	✓	✓
Cursor / Windsurf / Codex / Antigravity install	✗	✗	✗	✗	✓
Zero API calls	✓	✓	✓	✗	✓
Interactive coding sessions	✗	✗	✗	✓✓	✗
Any LLM	✓	✓	✓	✓	partial*

*--agent generic outputs standard markdown. Claude adapter has richer instructions.

What agentpack does NOT do well

• Interactive sessions on small repos: if your whole repo is <20k tokens, just use repomix
• One-shot public repo questions: gitingest's "replace hub with ingest" is faster for that
• Semantic understanding: keyword scoring + AST is not a language model — precise technical terms in your task description work better than vague ones

---

Install

pip install agentpack-cli

Requires Python 3.10+.

PyPI note: The package is agentpack-cli (the name agentpack was already taken). The CLI command is still agentpack.

---

Start Once, Then Work Normally

The full workflow:

# One-time project setup
agentpack init             # creates config, session, task.md
agentpack install          # configure your agent (optional but recommended)

# Every terminal session — just one command
agentpack watch            # auto-resumes session, refreshes context on file/task changes

Then open Claude Code / Cursor / Codex and write your coding task normally.

• AgentPack keeps .agentpack/context.md and .agentpack/context.claude.md fresh while watch is running.
• To change the task: agentpack session refresh --task "new task" — or just tell Claude and it updates task.md itself.
• Check session state: agentpack session status
• Force a refresh: agentpack session refresh
• Stop: agentpack session stop

Agent integration matrix

Agent	Automation level	Method
Claude Code (hook)	Highest	UserPromptSubmit hook auto-injects context
Claude Code (session)	High	init + watch + read context.md
Codex	Medium	AGENTS.md + init + watch
Cursor	Medium	.cursor/rules/agentpack.mdc + init + watch
Windsurf	Medium	.windsurfrules + init + watch
Antigravity	Medium	.agent/skills/agentpack/SKILL.md + GEMINI.md + init + watch
Generic	Basic	watch mode + read context.md

Honest limitations

• AgentPack cannot intercept prompts inside IDEs — Cursor/Windsurf rely on rules being followed.
• Claude wrapper (agentpack claude) is the most deterministic integration.
• If the task changes drastically mid-session, context needs one refresh cycle.
• AgentPack-selected files are ranked starting points, not absolute truth.

---

Quickstart

pip install agentpack-cli
cd your-project
agentpack init             # one-time setup: config + session + task.md
agentpack install          # auto-detects your IDE (Claude Code, Cursor, Windsurf, Codex, Antigravity)
agentpack watch            # in another terminal — keeps context fresh automatically

Then open your agent and write your task normally.

Power users (global automation):

agentpack global-install --dry-run   # preview
agentpack global-install             # apply
source ~/.zshrc

Then opt each project in: cd your-project && agentpack init. After that git hooks repack on commit and the Claude Code hook injects context on every session start — no manual steps.

---

Agent setup

Run once per project. Each command is idempotent — safe to re-run, never clobbers unrelated config.

agentpack install without --agent auto-detects the active IDE from environment variables and project files. Pass --agent explicitly to override.

Claude Code

agentpack install --agent claude

Configures:

• CLAUDE.md — tells Claude to read the context pack before each task
• .claude/settings.json — two hooks:
  • SessionStart: clears injection sentinel so first prompt gets context
  • UserPromptSubmit: auto-repacks when stale, injects context once per session

After this, context is injected automatically into every Claude Code session. No /agentpack command needed — it just happens.

Cursor

agentpack install --agent cursor

Configures:

• .cursorrules — rule: read .agentpack/context.md before every conversation
• .cursor/rules/agentpack.mdc — alwaysApply: true rule (Cursor v0.43+)
• .git/hooks/post-commit, post-merge, post-checkout — background repack on tree change
• .vscode/tasks.json — "AgentPack: Repack context" in Command Palette + runOn: folderOpen

Windsurf

agentpack install --agent windsurf

Configures:

• .windsurfrules — rule: read .agentpack/context.md before every conversation
• .git/hooks/post-commit, post-merge, post-checkout — background repack on tree change
• .vscode/tasks.json — "AgentPack: Repack context" in Command Palette + runOn: folderOpen

Codex

agentpack install --agent codex

Configures:

• AGENTS.md — tells Codex to read the context pack before each task
• .git/hooks/post-commit, post-merge, post-checkout — background repack on tree change

Antigravity

agentpack install --agent antigravity

Configures:

• .agent/skills/agentpack/SKILL.md — AgentPack context as a Skill; Antigravity activates it automatically for coding tasks
• GEMINI.md — registers the agentpack skill reference
• .git/hooks/post-commit, post-merge, post-checkout — background repack on tree change
• .vscode/tasks.json — "AgentPack: Repack context" in Command Palette + runOn: folderOpen

The Skill descriptor activates AgentPack automatically — no --task flag required when working in Antigravity.

Auto-repack comparison

Mechanism	Claude Code	Cursor	Windsurf	Codex	Antigravity
Config file patched	CLAUDE.md + .claude/settings.json	.cursorrules + .cursor/rules/*.mdc	.windsurfrules	AGENTS.md	.agent/skills/agentpack/SKILL.md + GEMINI.md
Auto-inject on startup	✅ UserPromptSubmit hook	✅ alwaysApply	✅ rules file	✅ AGENTS.md	✅ Skill auto-activation
Auto-repack when stale	✅ hook (snapshot hash, ~1ms when fresh)	✅ git hooks	✅ git hooks	✅ git hooks	✅ git hooks
Manual repack shortcut	✅ /agentpack slash cmd	✅ VS Code task	✅ VS Code task	agentpack pack	✅ VS Code task

---

The summary cache — the core feature

Run once, reuse forever:

agentpack summarize

Builds an offline summary of every file — no API calls, no network. Each summary captures:

• What the file does and its responsibility
• Exported classes, functions, signatures with extracted bodies
• Import dependencies

Summaries are stored in .agentpack/cache/ keyed by file hash. Only changed files are re-summarized on the next pack.

Team tip: commit the cache so every developer and CI job gets summaries for free:

agentpack init --share-cache
git add .agentpack/cache/
git commit -m "chore: add agentpack summary cache"

---

Honest token framing

AgentPack's pack is typically 10,000–25,000 tokens. Comparing that to "raw repo size" (200k–2M tokens) is misleading — nobody dumps the whole repo into Claude.

The real comparison for a piped/API workflow: what would you manually copy-paste to give Claude enough context? For a typical bug fix touching 3 files with 10 relevant dependencies, that's ~30,000–80,000 tokens assembled by hand. AgentPack gets you there in one command.

Token counts use tiktoken cl100k_base — a close approximation to Claude's actual billing, but not exact.

---

CI/CD: pack per PR

agentpack's own CI

agentpack uses two workflows:

• ci.yml — runs tests on Python 3.10–3.13 on every push and pull request to main
• release.yml — runs tests then publishes to PyPI on every v* tag push (uses PyPI trusted publishing)

Add context packing to your repo

Add to .github/workflows/agentpack-context.yml:

name: AgentPack context pack

on:
  pull_request:
    types: [opened, synchronize]

jobs:
  pack:
    runs-on: ubuntu-latest
    steps:
      - uses: actions/checkout@v4
        with:
          fetch-depth: 0

      - uses: actions/setup-python@v5
        with:
          python-version: "3.12"

      - run: pip install agentpack-cli

      - name: Generate context pack
        run: |
          agentpack init --yes
          agentpack pack --agent claude \
            --task "${{ github.event.pull_request.title }}" \
            --since origin/${{ github.base_ref }} \
            --mode balanced

      - name: Upload context pack
        uses: actions/upload-artifact@v4
        with:
          name: agentpack-context
          path: .agentpack/context.claude.md
          retention-days: 7

Reviewers download the artifact and open it in their agent of choice. No repo clone needed — the pack contains full content for changed files and summaries for dependencies.

---

Commands

agentpack global-install

Install once — works in every repo from that point on. The recommended first step.

agentpack global-install                       # auto-detect IDE
agentpack global-install --agent claude        # Claude Code
agentpack global-install --agent cursor        # Cursor
agentpack global-install --agent windsurf      # Windsurf
agentpack global-install --agent codex         # Codex
agentpack global-install --agent antigravity   # Antigravity

What it does:

• Git template hooks (~/.git-templates/hooks/) — git copies these into every repo on git init / git clone. On post-commit, post-merge, post-checkout: silently repacks only if .agentpack/config.toml exists — no-op in repos that haven't opted in.
• Shell cd hook (~/.zshrc or ~/.bashrc) — on cd, repacks if stale only in opted-in repos. Never touches repos without .agentpack/config.toml. Never auto-inits.
• Agent config — same as agentpack install --agent <x> for the current project.

All changes are idempotent, reversible, and non-destructive. Existing hooks and rc files are appended to, never overwritten. Repos you haven't explicitly run agentpack init in are never touched.

Options:

Flag	Default	Description
--agent	auto	Target agent (auto | claude | cursor | windsurf | codex | antigravity)
--no-pipx	—	Skip pipx install (if agentpack already installed)
--no-shell-hook	—	Skip shell rc patching
--no-git-template	—	Skip git template hooks
--dry-run	off	Show what would be changed without touching anything

Preview before committing:

agentpack global-install --dry-run

---

agentpack global-uninstall

Remove all global hooks — git templates and shell rc. Per-project .agentpack/ directories are untouched.

agentpack global-uninstall
agentpack global-uninstall --no-shell-hook    # remove only git template hooks
agentpack global-uninstall --no-git-template  # remove only shell hook

---

agentpack doctor

Diagnose your agentpack installation — checks CLI, git template hooks, git config, shell hook, per-repo state, and agent config.

agentpack doctor

Example output:

CLI
  ✓ agentpack found at /usr/local/bin/agentpack (0.1.0)

Git template hooks (~/.git-templates/hooks/)
  ✓ post-commit
  ✓ post-merge
  ✓ post-checkout

git config init.templateDir
  ✓ init.templateDir = /Users/you/.git-templates

Shell cd hook
  ✓ Hook present in /Users/you/.zshrc

Per-repo state
  ✓ .agentpack/config.toml present
  ✓ context pack present (age: 2m)

Agent config
  ✓ CLAUDE.md (agentpack configured)
  - .cursorrules not present (optional)
  ✓ Claude hooks present (local): .claude/settings.json
  ! ~/.claude/settings.json has no agentpack hooks — run: agentpack install --agent claude --global
  ! Hooks local-only — context won't auto-inject in other repos. Run: agentpack install --agent claude --global

Slash command (/agentpack)
  ✓ Slash command installed (local): .claude/commands/agentpack.md
  - Slash command not installed globally — run: agentpack install --agent claude --global

Some checks failed. Run the suggested commands above to fix.

The new checks in doctor:

• Local vs global hooks: warns when Claude hooks are only in the per-project .claude/settings.json — context won't auto-inject in other repos
• Slash command presence: checks both local (.claude/commands/) and global (~/.claude/commands/) installations

---

agentpack init

Initialize AgentPack in the current directory.

agentpack init                  # interactive mode picker
agentpack init --yes            # non-interactive, use defaults (good for CI)
agentpack init --share-cache    # commit cache/ to git for team sharing

Creates:

.agentignore              # gitignore-style file exclusion rules
.agentpack/
  config.toml             # configuration (safe to commit)
  .gitignore              # excludes cache/, snapshots/, context.* by default
  cache/                  # offline summary cache
  snapshots/              # file hash snapshots

---

agentpack install

Configure agentpack for your AI coding agent.

agentpack install                      # auto-detect IDE
agentpack install --agent claude       # CLAUDE.md + .claude/settings.json hooks
agentpack install --agent cursor       # .cursorrules + .mdc + git hooks + VS Code tasks
agentpack install --agent windsurf     # .windsurfrules + git hooks + VS Code tasks
agentpack install --agent codex        # AGENTS.md + git hooks
agentpack install --agent antigravity  # .agent/skills/agentpack/SKILL.md + GEMINI.md + git hooks + VS Code tasks

All installs are idempotent — safe to re-run, merge with existing config, never duplicate.

---

agentpack summarize

Build or refresh the offline summary cache. No API calls, ever.

agentpack summarize              # build summaries for all files not yet cached
agentpack summarize --refresh    # force rebuild all

Summaries are built with parallel AST/regex analysis — no network, no tokens spent. Run once after init. After that, pack automatically rebuilds summaries only for changed files (hash-keyed cache).

---

agentpack pack

Generate a context pack.

agentpack pack --task "fix auth session bug"        # auto-detects your IDE
agentpack pack --agent claude --task "fix auth bug" # explicit agent

# Only include changes since a git ref
agentpack pack --task "review these changes" --since main

# Watch mode — re-packs on every file change
agentpack pack --task "refactor auth" --session

Options:

Flag	Default	Description
--agent	auto	Target agent (auto | claude | cursor | windsurf | codex | antigravity | generic). auto detects the active IDE from env and project files.
--task	auto	Task description, or auto to infer from git
--mode	balanced	Budget mode: minimal, balanced, deep
--budget	25000	Token budget
--since	—	Only include files changed since this git ref
--session	off	Re-pack on every file change (watch mode)
--refresh	off	Force rebuild summaries before packing
--budget	25000	Token budget override

Budget modes:

Mode	What's included
minimal	Changed files + direct configs only
balanced	Changed files + deps + reverse deps + tests + summaries
deep	Everything in balanced + docs + more full-content files

---

agentpack session

Optional session management. agentpack init bootstraps the session automatically — session start is only needed to change agent/mode after init or force a fresh pack.

agentpack session start                      # re-run to change agent/mode or force refresh
agentpack session start --agent claude       # set agent (claude|cursor|codex|generic)
agentpack session start --task "fix bug"     # change task + refresh context
agentpack session status                     # show session state + context size
agentpack session refresh                    # regenerate context now
agentpack session refresh --task "new task"  # change task + refresh
agentpack session stop                       # mark session inactive

agentpack init creates (idempotently):

• .agentpack/session.json — session state
• .agentpack/task.md — current task (edit directly or use session refresh --task)
• .agentpack/context.md — readable context pack (updated by watch)
• .agentpack/context.claude.md — Claude Code format (always written alongside context.md)
• .agentpack/context.compact.md — compact protocol format

---

agentpack watch

Watch for file and task changes, refresh context automatically.

agentpack watch                        # uses session agent/mode if session active
agentpack watch --debounce 3.0         # wait 3s after last change before refresh

Uses watchdog if installed, falls back to polling. Context is refreshed whenever source files or .agentpack/task.md change.

Install watchdog for better performance:

pip install "agentpack-cli[watch]"

---

agentpack claude

Launch Claude CLI with an up-to-date context.

agentpack claude

Requires an initialized project (agentpack init). Refreshes context, prints the context path, then launches claude if found. Transparent about what it does — no fake prompt injection.

---

agentpack mcp

Run AgentPack as an MCP server — exposes context packing as tools that Claude Code (and any MCP-compatible agent) can call directly.

pip install "agentpack-cli[mcp]"
agentpack mcp

Register in Claude Code settings (~/.claude/settings.json):

{
  "mcpServers": {
    "agentpack": {
      "command": "agentpack",
      "args": ["mcp"]
    }
  }
}

Tools exposed:

Tool	Description
pack_context(task, mode, budget, max_tokens)	Generate a ranked context pack for a task. Returns packed markdown, truncated to max_tokens (default 20,000).
get_context()	Return the latest pre-built pack instantly (no repack). Prepends a freshness/staleness header so you know if it's stale.
refresh()	Refresh using the current task.md or git-inferred task.

Staleness detection: get_context() compares the snapshot hash from when the pack was built against the current repo snapshot. If files changed since last pack, it prepends:

> **Stale context** — repo changed since last pack (generated: ...). Run pack_context() to refresh.

Smart truncation: pack_context() keeps headers intact and trims file content blocks to fit the token budget, appending a note about how many files were omitted.

Zero API calls — all analysis is offline. Summary cache keyed by file hash: cold run parallelises AST parsing across CPU cores; warm cache hits are instant.

---

agentpack explain

Debug file selection — show which files would be selected, why, and what was excluded — without writing a context pack.

agentpack explain --task "fix auth session bug"
agentpack explain --task auto
agentpack explain --file src/auth/session.py   # per-file score breakdown
agentpack explain --omitted                    # top-10 excluded files

Per-file breakdown (--file):

src/auth/session.py
  selected:  yes
  score:     310
  include:   full
  tokens:    4,200

  signals:
    +100  modified
    +80   filename keyword match
    +60   content keyword match (6)
    +50   direct dependency of changed file
    +35   has related tests

  symbols: create_session, revoke_session, validate_session

Use --omitted to see what was left out and why. Use --file when a file you expected isn't showing up.

---

agentpack benchmark

Measure token efficiency, file selection quality, and speed across tasks.

agentpack benchmark --task "fix auth token expiry"         # single task
agentpack benchmark --task "fix auth bug" --compare        # compare minimal/balanced/deep
agentpack benchmark --init                                 # scaffold .agentpack/benchmark.toml
agentpack benchmark                                        # run all cases in benchmark.toml

Output per case:

fix auth token expiry  mode=balanced

   packed tokens     29,357
   raw tokens       187,998
   saving             84.4%
   files selected       234
   changed covered    2/2  (100%)
   total time          0.45s

   phase    time
   scan     0.257s
   rank     0.027s
   select   0.009s

  top files: src/auth/token.py, src/auth/session.py, ...

Compare mode shows all three modes side-by-side:

Mode comparison: fix auth token expiry

   mode        tokens   saving   files   time
   minimal     29,882    84.1%     253   0.34s
   balanced    29,882    84.1%     253   0.24s
   deep         7,563    96.0%      43   0.24s

With expected files (add to benchmark.toml), you get precision/recall/F1:

[[cases]]
task = "fix auth token expiry"
mode = "balanced"
expected_files = [
  "src/auth/token.py",
  "src/auth/session.py",
]

  precision 100.0%  recall 100.0%  F1 100.0%
  hit: src/auth/session.py, src/auth/token.py

---

agentpack scan

Scan the repo and report file statistics.

Files discovered:     1,248
Files ignored/binary:   230
Files scanned:          210
Raw estimated tokens: 940,000
Tokens after ignore:  210,000

---

agentpack stats

Show session state and token statistics for the last pack.

agentpack stats

When a session is active, shows session panel (agent, mode, started, refresh count) above token stats. Also lists top included files by score.

---

agentpack status

Check whether the context pack is stale.

agentpack status
# Context pack is up to date.
#   Task: fix auth session bug
#   Generated: 2026-04-29T12:00:00Z

---

agentpack diff

Show changes since last snapshot.

Added:    3 files
Modified: 7 files
Deleted:  1 file
Unchanged: 202 files

---

agentpack monitor

Show pack performance across runs — timing per phase, token savings trend.

agentpack monitor           # last 20 runs
agentpack monitor --last 5
agentpack monitor --clear

---

How it works

1. Scan repo  →  apply .agentignore  →  hash every file
2. Build current snapshot  →  diff against previous snapshot
3. Get git changed/staged files  (+ --since <ref> if specified)
4. Build import dependency graph (Python/JS/TS: full; Go/Rust/Java: best-effort)
5. Detect related test files
6. Extract task keywords + concept synonym expansion
7. Enrich keywords from changed file content (high-frequency identifiers)
8. Score every file, rank by score
9. Select within token budget
10. For each selected file:
      changed + small  →  full content
      changed + large  →  symbol bodies (ast.get_source_segment)
      unchanged dep    →  summary + signatures
      low-score file   →  summary only
11. Generate context receipts (why each file included/excluded)
12. Render markdown for target agent  →  save context pack
13. Save snapshot + metadata + metrics

---

File scoring

Signal	Points
Modified file	+100
Staged file	+90
Filename/path keyword match	+80
Symbol keyword match	+70
Content keyword match	+60
Direct dependency of changed file	+50
Reverse dependency	+40
Has related tests	+35
Config file	+25
Recently modified	+20
Large unrelated file	−50
Ignored/binary	−100

Keyword scoring uses concept synonym expansion — "rate limiting" in the task expands to throttle, leaky, bucket, quota etc., so leaky_bucket.py ranks correctly even if the file name doesn't literally contain "rate".

---

Configuration

.agentpack/config.toml:

[project]
root = "."
ignore_file = ".agentignore"

[context]
default_budget = 25000
default_mode = "balanced"
max_file_tokens = 4000
include_tests = true
include_configs = true
include_receipts = true

[agents.claude]
output = ".agentpack/context.claude.md"
patch_claude_md = true

[agents.generic]
output = ".agentpack/context.md"

---

Configurable scoring weights

# .agentpack/config.toml
[scoring]
modified                  = 100
staged                    = 90
filename_keyword          = 80
symbol_keyword            = 70
content_keyword_per_hit   = 10
content_keyword_max       = 60
direct_dep                = 50
reverse_dep               = 40
related_test              = 35
config_file               = 25
recently_modified         = 20
large_unrelated_penalty   = -50
ignored_penalty           = -100

---

.agentignore

Works like .gitignore. Default rules exclude:

• node_modules/, .venv/, __pycache__/
• dist/, build/, .next/, coverage/
• *.lock, *.log, *.min.js, *.map
• .env, .env.*, *.pem, *.key
• *.csv, *.jsonl, *.parquet

---

Git integration

.agentignore              ✓ commit
.agentpack/config.toml    ✓ commit
.agentpack/cache/         ✓ commit if --share-cache (recommended for teams)
.agentpack/snapshots/     ✗ gitignored
.agentpack/context.*      ✗ gitignored

---

Architecture

Data flow

┌─────────────────────────────────────────────────────────────────────┐
│                        agentpack pack                               │
└──────────────────────────────┬──────────────────────────────────────┘
                               │
          ┌────────────────────▼────────────────────┐
          │              SCAN LAYER                  │
          │                                         │
          │  pathlib.rglob()  ──▶  .agentignore     │
          │       │                 (pathspec)       │
          │       ▼                                  │
          │  FileInfo[]  (path, hash, tokens, lang) │
          └────────────────────┬────────────────────┘
                               │
          ┌────────────────────▼────────────────────┐
          │            ANALYSIS LAYER                │
          │                                         │
          │  Import graph  ──  Python AST           │
          │  (6 languages)  ─  JS/TS regex          │
          │                 ─  Go regex              │
          │                 ─  Rust regex            │
          │                 ─  Java/Kotlin regex     │
          │                                         │
          │  Symbol extract  ── Python AST (full)   │
          │    (body via       ── JS/TS (functions, │
          │  ast.get_source_segment)   classes,     │
          │                    ── arrow fns w/ =>)  │
          │                                         │
          │  Test detection  ── name heuristics     │
          │  Task keywords   ── stopwords + variants│
          │                  ── concept synonyms    │
          │                  ── content enrichment  │
          └────────────────────┬────────────────────┘
                               │
          ┌────────────────────▼────────────────────┐
          │     SUMMARY CACHE  (offline, local)      │
          │                                         │
          │  key: path + hash + provider + schema   │
          │  hit  → instant, zero I/O               │
          │  miss → build from AST/regex, cache it  │
          │                                         │
          │  offline  ──  AST / regex extract       │
          └────────────────────┬────────────────────┘
                               │
          ┌────────────────────▼────────────────────┐
          │           CHANGE DETECTION               │
          │                                         │
          │  Snapshot diff  (merkle root hash)      │
          │       +                                 │
          │  git diff / git diff --cached           │
          │       +                                 │
          │  git diff <ref> HEAD  (--since flag)    │
          └────────────────────┬────────────────────┘
                               │
          ┌────────────────────▼────────────────────┐
          │              RANKING                     │
          │                                         │
          │  Score each file (configurable weights) │
          │  +100 modified  +80 filename match      │
          │   +70 symbol    +60 content match       │
          │   +50 dep       +40 rev-dep             │
          │   +35 test      +25 config  +20 recent  │
          │   -50 large unrelated                   │
          └────────────────────┬────────────────────┘
                               │
          ┌────────────────────▼────────────────────┐
          │         BUDGET SELECTION                 │
          │                                         │
          │  Sort by score, consume until budget    │
          │                                         │
          │  changed + small  ──▶  full content     │
          │  changed + large  ──▶  symbol bodies    │
          │  unchanged dep    ──▶  summary + sigs   │
          │  low score        ──▶  summary only     │
          └────────────────────┬────────────────────┘
                               │
          ┌────────────────────▼────────────────────┐
          │              RENDERING                   │
          │                                         │
          │  Claude adapter      ──▶  context.claude.md │
          │  Cursor adapter      ──▶  context.md        │
          │  Windsurf adapter    ──▶  context.md        │
          │  Codex adapter       ──▶  context.md        │
          │  Antigravity adapter ──▶  .agent/skills/agentpack/SKILL.md │
          │  Generic adapter     ──▶  context.md        │
          │                                         │
          │  Context receipts (why each file in/out)│
          │  Secret redaction (AWS/GH/OpenAI tokens)│
          └─────────────────────────────────────────┘

Package layout

src/agentpack/
  cli.py                       # Typer CLI entry point (thin — delegates to commands/)

  data/
    agentpack.md               # bundled /agentpack slash command for Claude CLI

  application/
    pack_service.py            # PackPlanner: shared scan→rank→select pipeline
                               # PackService: materializes plan → writes context file
                               # AdapterRegistry: maps agent names to adapter instances
                               # PackRequest / PackResult / PackPlan DTOs

  domain/  (via core/models.py)
    FileInfo, ScanResult       # scan output (packable / ignored / binary)
    Symbol, FileSummary        # summary cache objects
    SelectedFile, Receipt      # selection output with redaction_warnings
    ContextPack                # final artifact with redaction_warnings
    DependencyNode             # typed graph node (path, imports, imported_by, tests)
    DependencyGraph            # typed graph container (nodes dict + dict-like accessors)

  core/
    models.py                  # Pydantic domain models (see above)
    config.py                  # TOML config + ScoringWeights
    ignore.py                  # .agentignore / gitignore-style matching
    scanner.py                 # rglob → ScanResult (packable/ignored/binary split)
    snapshot.py                # JSON snapshots + merkle root hash
    diff.py                    # added / modified / deleted / unchanged diff
    git.py                     # subprocess git + task inference from branch/commits
    merkle.py                  # root hash: sort(path:hash) → sha256
    cache.py                   # summary cache keyed path+hash+provider+version
    context_pack.py            # select_files: budget selection + secret redaction
    token_estimator.py         # tiktoken cl100k_base (approximate)
    redactor.py                # redact_secrets: fires at content materialization
    bootstrap.py               # is_initialized, bootstrap_if_needed

  analysis/
    dependency_graph.py        # build(): returns typed DependencyGraph over packable files
    python_imports.py          # ast-based import extraction
    js_ts_imports.py           # regex import extraction (ESM + CJS)
    go_imports.py              # Go import / import(...) blocks
    rust_imports.py            # use, mod, extern crate
    java_imports.py            # Java import + Kotlin import
    symbols.py                 # AST symbols + body via ast.get_source_segment
    tests.py                   # source → test file mapping heuristics
    ranking.py                 # keyword extraction, concept synonyms, scoring

  summaries/
    offline.py                 # zero-API: AST/regex → imports, symbols, summary
    base.py                    # cache-or-build orchestration (parallel, ThreadPool+ProcessPool)

  adapters/                    # context rendering only — no installation logic
    base.py                    # abstract BaseAdapter (output_path + render + write)
    claude.py                  # renders context.claude.md via render_claude()
    cursor.py                  # renders context.md via render_generic()
    windsurf.py                # renders context.md
    codex.py                   # renders context.md
    antigravity.py             # renders .agent/skills/agentpack/SKILL.md (SKILL.md frontmatter + body)
    generic.py                 # renders context.md (any LLM)
    detect.py                  # detect_agent(): infers active IDE from env vars + project files

  installers/                  # repo/tool configuration — separate from rendering
    claude.py                  # ClaudeInstaller: CLAUDE.md + .claude/settings.json
    cursor.py                  # CursorInstaller: .cursorrules + .mdc + auto-repack
    windsurf.py                # WindsurfInstaller: .windsurfrules + auto-repack
    codex.py                   # CodexInstaller: AGENTS.md + git hooks
    antigravity.py             # AntigravityInstaller: GEMINI.md + .agent/skills/ + auto-repack

  integrations/                # system/tool integration (not core domain)
    git_hooks.py               # install/remove .git/hooks post-commit/merge/checkout
    vscode_tasks.py            # install/remove .vscode/tasks.json entries
    global_install.py          # global: git template hooks + shell rc hook

  renderers/
    markdown.py                # renders pre-redacted ContextPack to markdown
    compact.py                 # compact protocol format for session context files
    receipts.py                # context receipt formatter

  session/
    state.py                   # SessionState dataclass + load/save/create/stop helpers
    __init__.py                # re-exports from state.py

  commands/                    # CLI only — parse args, call services/installers
    pack.py                    # agentpack pack → PackService.run()
    install.py                 # agentpack install / global-install → installers/
    init.py                    # agentpack init
    scan.py                    # agentpack scan
    diff.py                    # agentpack diff
    status.py                  # agentpack status
    stats.py                   # agentpack stats
    summarize.py               # agentpack summarize
    monitor.py                 # agentpack monitor
    explain.py                 # agentpack explain
    doctor.py                  # agentpack doctor
    session.py                 # agentpack session start/stop/status/refresh
    watch.py                   # agentpack watch — file watcher with debounce
    claude_cmd.py              # agentpack claude — refresh + launch claude
    benchmark.py               # agentpack benchmark — token efficiency + selection quality

Key architectural properties

• Redaction at materialization: secrets are stripped inside select_files() before content reaches any renderer or adapter. Every output format gets redacted content automatically — no per-renderer redaction needed.
• ScanResult splits cleanly: scan() returns ScanResult(packable, ignored, binary) — downstream code only processes packable files, eliminating if f.ignored or f.binary guards throughout.
• PackPlanner owns shared planning: PackPlanner.plan() runs scan → summarize → graph → rank → select and returns a PackPlan. Both pack and explain use the same planner — no duplicated pipeline logic, no drift.
• PackService materializes a plan: takes a PackPlan, builds the ContextPack artifact, delegates rendering to AdapterRegistry, persists snapshot + metadata + metrics.
• AdapterRegistry maps agent → adapter: adding a new agent output format requires one entry in AdapterRegistry.get(), not changes to PackService.
• detect_agent() runs at invocation time: --agent auto (the default) calls detect_agent() fresh on every pack run and git hook execution — so context is always written for the active IDE, even when switching between agents or running in CI.
• DependencyGraph is typed: dependency_graph.build() returns DependencyGraph(nodes: dict[str, DependencyNode]) — no more dict[str, dict] with stringly-typed keys like "imported_by". Typos are caught at the model layer.
• integrations/ vs core/: git hooks, shell rc patching, and VS Code tasks are infrastructure concerns — they live in integrations/, not core/. core/ is pure domain logic.
• Adapters render; installers configure: adapters/ knows how to write a context file for an agent. installers/ knows how to configure the agent's tool (CLAUDE.md, .cursorrules, settings.json). They are separate concerns and separate classes.

---

Practical examples

Bug fix: "I have a failing test, help me fix it"

# You're debugging a test failure in the auth module
agentpack pack --task "fix failing test in auth token validation"

AgentPack selects: the failing test file (modified), auth/token.py (dep), auth/session.py (dep), config/settings.py (config), skips 180 unrelated files. Your agent gets 12k tokens of precisely relevant context and starts debugging immediately.

---

Feature: "Add rate limiting to the API"

# On a feature branch, nothing modified yet
agentpack pack --task "add rate limiting to REST API endpoints"

Keyword expansion activates: "rate limiting" → throttle, leaky, bucket, quota. AgentPack scores: middleware/ directory (path keyword api), existing throttle.py or leaky_bucket.py (content keyword), routes/*.py (deps). Your agent gets the full middleware stack and starts implementing, not exploring.

---

Code review: "Review my PR before I push"

# Review only what changed vs main
agentpack pack --task "code review auth refactor" --since main

Only files touched in this branch are included (full content). Everything else is summaries or omitted. Your agent reviews exactly the diff-visible code, not the whole codebase.

---

Refactor: "Help me refactor the database layer"

agentpack pack --task "refactor database connection pooling" --mode deep

--mode deep adds: related docs, more full-content files, broader dep tree. Use when the task touches many files and you want your agent to see more context upfront.

---

CI: automated context on every PR

Add to .github/workflows/agentpack-context.yml — see the full example in CI/CD: pack per PR. Reviewers and CI bots get focused context without cloning the repo.

---

Session mode: keep context fresh while you work

# One-time project setup
agentpack init --task "refactor auth"   # or edit .agentpack/task.md directly

# Every terminal session — just one command
agentpack watch   # auto-resumes session, refreshes context on every save

# Change task mid-session
agentpack session refresh --task "new task"

---

Debug why a file isn't showing up

agentpack explain --task "fix rate limiting in auth middleware"
# Top selected files:
#   1. src/auth/middleware.py  score=180  [full]     modified, filename keyword match
#   2. src/auth/limiter.py     score=130  [symbols]  dep + content keyword "throttle"
#   ...
# Excluded:
#   - src/payments/billing.py  score=8    score too low

---

Tips & tricks

Let --task auto do the work

Skip writing a task description — agentpack infers it from your branch name, changed files, and recent commits:

agentpack pack --task auto

Priority order: branch name → changed file paths → recent commit message. The more descriptive your branch names (feat/add-rate-limiting beats dev), the better the inferred task.

Concept synonym expansion

AgentPack expands task keywords automatically — "rate limiting" expands to throttle, leaky, bucket, quota, debounce; "auth" expands to jwt, bearer, token, oauth; "cache" expands to lru, memoize, redis, ttl. Files that implement a concept but don't use its exact name still rank correctly.

Content-based keyword enrichment

When you run agentpack pack, changed file content is scanned for high-frequency identifiers. If you're editing session_manager.py that mentions validate_token 30 times, validate and token are added as keywords — related files that use the same terms get a score boost even if your task string didn't mention them.

Commit the summary cache for instant team packs

agentpack init --share-cache
git add .agentpack/cache/
git commit -m "chore: add agentpack summary cache"

Every teammate and CI job skips the summarize step. agentpack pack is significantly faster from a warm cache.

Use --since for PR reviews

agentpack pack --task "review auth changes" --since main

Only includes files changed since main. Cuts out noise from unrelated work in long-running branches.

Tune the budget for your use case

agentpack pack --task "fix bug" --mode minimal   # changed files only, fewest tokens
agentpack pack --task "refactor" --mode deep     # everything including docs
agentpack pack --task "fix bug" --budget 40000   # explicit token cap

balanced (default) is right for most tasks. Use minimal for quick fixes, deep when architectural context matters.

Watch mode for active sessions

agentpack init                  # one-time setup (creates session + task.md)
agentpack watch                 # in another terminal — auto-resumes each time

Refreshes .agentpack/context.md every time you save a file. Change the task with agentpack session refresh --task "..." — or tell Claude and it writes task.md itself.

Debug file selection with explain

agentpack explain --task "fix auth session bug"

Shows ranked scores and reasons before committing to a pack. Use when a file you expect isn't appearing.

Check what got included and why

Every pack includes a context receipt explaining each file's inclusion or exclusion:

- `src/auth.py` included because modified, filename keyword match
- `tests/test_auth.py` summarized because test for src/auth.py
- `src/unrelated_big.py` excluded because score too low

Use this to tune your .agentignore or scoring weights when irrelevant files keep appearing.

Tune scoring weights per project

If tests are always irrelevant to your tasks, drop their weight. If config files are critical, raise them:

# .agentpack/config.toml
[scoring]
related_test    = 5    # was 35 — tests rarely relevant
config_file     = 60   # was 25 — configs always matter here

---

Principles

• Local-first: init, scan, diff, pack, stats, summarize make zero API calls — ever. No optional LLM paths, no per-file costs.
• Non-destructive: never overwrites user files; config patching only touches agentpack-managed blocks
• Agent-neutral: architecture is generic; Claude Code is the primary target (deepest integration); Cursor, Windsurf, Codex, and Antigravity are supported but less battle-tested
• No daemons: file watching is opt-in via agentpack watch; git hooks run in the background and are opt-in via install
• Honest: packed token count reflects real content, not raw repo size

---

Known limitations

• Windows: not supported. Git hooks use POSIX shell (#!/bin/sh, >/dev/null 2>&1 &). The Claude Code session hooks use python3 and rm -f. Contributions welcome.
• Monorepos: single-root repos only. If you agentpack pack from a monorepo root, all packages are scanned together with no workspace awareness. Workaround: cd packages/my-pkg && agentpack init && agentpack pack.
• Symbol extraction: Python (AST, full) and JavaScript/TypeScript (regex, arrow functions + classes) are well-supported. Go, Rust, Java, Kotlin have import graph traversal but no symbol extraction — they fall back to file-level summaries.
• Secret redaction: covers AWS keys, GitHub tokens, OpenAI/Anthropic keys, JWTs, and private key blocks. Not a substitute for a dedicated secrets scanner on sensitive repos.
• Token estimates: uses tiktoken cl100k_base — approximate, not exact for Claude's billing.
• Large repos (>5k files): global auto-bootstrap is skipped for repos over 5,000 files to avoid hangs. Run agentpack init explicitly in large codebases.

---

Optional dependencies

pip install "agentpack-cli[watch]"    # watchdog — faster file watching for agentpack watch
pip install "agentpack-cli[mcp]"      # mcp — expose agentpack as MCP server tools
pip install "agentpack-cli[all]"      # watch + mcp

---

License

MIT