aiopquic 0.3.3

High-performance QUIC/HTTP3 library — picoquic-backed, qh3-compatible asyncio API

aiopquic - Async QUIC + WebTransport (picoquic)

aiopquic is a Python/Cython binding to picoquic, providing high-performance QUIC transport and WebTransport for asyncio applications.

Overview

aiopquic exposes picoquic's QUIC implementation through a lock-free SPSC ring buffer architecture that bridges the picoquic network thread with Python's asyncio event loop. It provides an asyncio QUIC/HTTP3 transport API in the spirit of aioquic (and its fork qh3) — similar shapes for QuicConfiguration, QuicConnection, connect / serve, and event types — plus a native WebTransport client/server layered on picoquic's H3 + h3zero. Not a drop-in replacement: semantics differ around backpressure (send_stream_data raises BufferError on full per-stream ring) and flow-control sizing.

Architecture

• SPSC Ring Buffers -- Lock-free single producer/single consumer rings for event passing between threads, separate TX and RX rings per TransportContext.
• TX path -- Asyncio pushes into per-stream byte ring; picoquic pulls at wire rate via prepare_to_send.
• RX path -- picoquic pushes per-event StreamChunks; ownership transfers at pop for 1-copy delivery.
• Cross-platform wake fd -- Linux eventfd for efficient asyncio add_reader() notification; pipe() self-pipe fallback on macOS / BSD.
• Dedicated Network Thread -- picoquic runs in its own thread via picoquic_start_network_thread().
• Cython Bridge -- Thin Cython layer over C callbacks, minimal overhead.
• WebTransport -- asyncio.webtransport.WebTransportSession (client + server) over picoquic's picowt_* API and h3zero.

Features

• QUIC client and server: connect, serve, QuicConnectionProtocol
• Stream data send/receive with FIN signaling, stream reset, stop_sending
• WebTransport client + server: serve_webtransport, WebTransportSession
• QUIC datagram TX + RX (note: WebTransport datagram TX not yet wired)
• Connection migration / 0-RTT (inherited from picoquic)
• Connection management: create, close, idle timeout, application close codes
• Per-cnx multiplexing on the server side via QuicEngine
• TLS keylog (NSS Key Log Format) for pcap decryption
• Native picoquic_ct / picohttp_ct subprocess smoke (catches upstream regressions on every submodule update)

Test Results

Tests pass on Linux and macOS. The interop suite is opt-in (network-dependent).

Suite	Coverage
test_spsc_ring	per-event malloc ring lifecycle
test_buffer	Cython Buffer
test_transport	Transport lifecycle, wake fd, wake-up, connection management
test_loopback	17 tests — handshake, streams, FIN, reset, datagrams, ALPN mismatch, idle timeout, app-close codes, stop_sending, many-streams stress, TX-ring overflow
test_asyncio	client/server stream + datagram exchange via connect / serve
test_baton_pattern	Pure-QUIC baton-style stream multiplexing (UNI ↔ BIDI)
test_native_picoquic	picoquic_ct / picohttp_ct subprocess driver
test_interop	Real public endpoints (opt-in)
tests/bench/	microbenches: ring push/pop, single-shot/sustained/parallel/bidirectional throughput, datagrams, RTT latency, handshake rate, byte-verifying object stress + stream churn + concurrent streams (opt-in via pytest tests/bench)

Performance

Sustained single-stream throughput, 30s steady-state, byte-verifying, high-level asyncio API (QuicConnection.send_stream_data):

platform	1 KiB	4 KiB	16 KiB
AMD Ryzen 7 PRO 7840U / WSL2 / Linux 6.6	1,570 Mbps	2,118 Mbps	2,031 Mbps
Apple M-series / macOS Sonoma	953 Mbps	1,130 Mbps	1,104 Mbps

These are over local UDP loopback at the QUIC default MTU (~1,400 B). The realistic ceiling at that MTU is the kernel's per-syscall sendmsg rate, not bandwidth. On Ryzen WSL2, raw iperf3 -u -l 1400 over loopback maxes at 3.15 Gbps (≈ 280 K syscalls/s); raise the datagram size and it climbs cleanly — 4 KiB → 7.9, 8 KiB → 12.8, 32 KiB → 33.7 Gbps. So QUIC pinned at MTU is in a regime where the syscall rate is the wall.

In that regime, here's where the layers land on Ryzen WSL2:

layer	ss_mbps	of UDP@1400 ceiling
iperf3 -u -l 1400 (raw UDP loopback)	3,150	100 %
picoquicdemo -a perf (picoquic over UDP)	2,184	69 %
aiopquic lowlevel (SPSC ring + UDP)	2,322	74 %
aiopquic highlevel (asyncio + SPSC + UDP)	2,031	64 %
sim_link_bench (picoquic only, no kernel UDP)	11,216	— (off-axis)

The asyncio wrapper costs ~10 % below the lowlevel SPSC path; picoquic's own QUIC framing/encryption/ACK overhead accounts for ~25 % vs raw UDP. Both are normal for QUIC-over-loopback at MTU.

sim_link_bench (tests/bench/sim_link/) drives picoquic over its picoquictest_sim_link simulated link — packets are routed in-process between two picoquic_quic_t instances, no kernel UDP, no sockets, no syscall-rate ceiling. It isolates picoquic protocol CPU cost from the loopback wall and is platform-independent. The 11.2 Gbps number above is what picoquic can do without any kernel involvement on this hardware. Build with ./tests/bench/sim_link/build.sh after ./build_picoquic.sh.

Calibrate on your own hardware:

# UDP-over-loopback path (what aiopquic users actually see)
pytest tests/bench/bench_baselines_highlevel.py -s -v          # 30s default
pytest tests/bench/bench_baselines_highlevel.py -s -v --duration=60

# Protocol-only reference (no kernel UDP)
PICOQUIC_SOLUTION_DIR=third_party/picoquic/ \
    tests/bench/sim_link/sim_link_bench --duration-s 30 --rate-gbps 100

Microbenches (ring lifecycle, stream churn, concurrent-streams short bursts) live under tests/bench/ for development reference. Their reported numbers are not representative of sustained throughput — short windows inflate numbers from warmup transients (a 100-stream churn case at 256 B per stream measures ~1 ms of work, dominated by setup cost).

Installation

Wheels for cp312 / cp313 / cp314 on Linux (manylinux_2_34, glibc 2.34+) and macOS arm64 are published to PyPI:

uv pip install aiopquic     # or: pip install aiopquic

For older Linux (glibc 2.28–2.33) install via sdist; build toolchain required.

From source

git clone https://github.com/gmarzot/aiopquic.git
cd aiopquic
git submodule update --init --recursive
./bootstrap_python.sh    # creates .venv with uv-managed Python 3.14 (GIL build) and pins cython 3.2+
source .venv/bin/activate
./build_picoquic.sh      # builds picotls, picoquic, native test drivers
uv pip install -e '.[dev]'    # or: pip install -e '.[dev]'

On macOS, set OPENSSL_ROOT_DIR if Homebrew OpenSSL is not auto-detected (the build script tries openssl@3 then openssl@1.1).

Usage

Low-level Transport API

from aiopquic._binding._transport import TransportContext

server = TransportContext()
server.start(port=4433, cert_file="cert.pem", key_file="key.pem", alpn="moq-00", is_client=False)

client = TransportContext()
client.start(port=0, alpn="moq-00", is_client=True)
client.create_client_connection("127.0.0.1", 4433, sni="localhost", alpn="moq-00")

Asyncio API

from aiopquic.asyncio.client import connect
from aiopquic.quic.configuration import QuicConfiguration

configuration = QuicConfiguration(alpn_protocols=["myproto"], is_client=True)

async with connect("server", 4433, configuration=configuration) as protocol:
    quic = protocol._quic
    stream_id = quic.get_next_available_stream_id()
    quic.send_stream_data(stream_id, payload, end_stream=True)
    protocol.transmit()

payload is opaque bytes; the library doesn't impose framing. Consumers that want HTTP/3 layer on top of aiopquic's picowt-backed h3zero plumbing; consumers that want WebTransport use serve_webtransport / connect_webtransport. Most direct users of the asyncio API ship their own protocol bytes (MoQT, custom binary frames, etc.).

WebTransport

from aiopquic.asyncio.webtransport import (
    serve_webtransport, WebTransportSession,
)
# See src/aiopquic/asyncio/webtransport.py and tests/ for full examples.

Development

uv pip install -e '.[dev]'    # or: pip install -e '.[dev]'
python -m pytest tests/ -v -m "not interop and not native"

# Microbenches (opt-in)
python -m pytest tests/bench

Known Limitations

• Free-threaded Python (3.14t) not yet supported -- the TX-ring producer side, TransportContext lifecycle, and the WebTransport engine state currently rely on the GIL for serialization. FT support deferred until a per-context locking audit lands.
• STOP_SENDING error codes surface as 0 today: picoquic's public stream-error getter only returns the RESET_STREAM code. STOP_SENDING's code lives in stream->remote_stop_error in picoquic_internal.h (no public getter). A small helper that pulls the field is straightforward future work — see TODO in src/aiopquic/_binding/c/callback.h.
• Per-stream wrapper cleanup before connection close -- per-stream aiopquic_stream_ctx_t* wrappers are freed at connection close rather than at stream RESET/FIN. Bounded leak per cnx; flagged for follow-up.

TODO

• Windows support (eventfd alternative — IOCP / WSAEventSelect on the wake-fd path)
• Free-threaded Python (3.14t) support after producer-side locking audit
• STOP_SENDING error-code surfacing helper (read remote_stop_error from picoquic_internal.h)
• Per-stream wrapper cleanup on RESET/FIN before connection close
• WebTransport datagram TX path through the C bridge
• Datagram benches: latency percentiles, payload-size sweep, loss / jitter under load (today's bench_datagram is fire-and-count throughput only)
• Pure stream open/close microbench (lifecycle rate without payload, separate from bench_stream_churn_highlevel which bundles writes + FIN)
• Submit aiopquic to the QUIC interop runner for cross-implementation coverage

Resources

• picoquic -- QUIC implementation by Christian Huitema
• picotls -- TLS 1.3 implementation
• Media Over QUIC Working Group

---

A Marz Research project.
Author: G. S. Marzot <[e-mail]>

License

MIT License -- see LICENSE