aiortp 0.3.0

Asyncio RTP/RTCP audio and video library for Python

aiortp

Asyncio RTP/RTCP library for Python — audio and video.

Plain RTP/RTCP for audio and video — no WebRTC, no ICE, no DTLS. Built for telephony, VoIP, and video streaming applications where you need direct control over RTP streams.

Portions derived from aiortc by Jeremy Lainé (BSD-3-Clause).

Features

• Pure Python — zero required dependencies, Python >=3.11
• AsyncIO native — built on asyncio.DatagramProtocol
• Audio codecs — G.711 µ-law/A-law, L16, G.722 (pip install aiortp[g722]), Opus (pip install aiortp[opus])
• Video codecs — H.264 (RFC 6184), VP8 (RFC 7741), VP9 (RFC 9628) depacketization/packetization
• RTCP — Sender Reports (with real RTP timestamps), Receiver Reports, SDES, BYE, PLI, NACK
• DTMF — RFC 4733 telephone-event send/receive with redundant end packets
• Jitter buffer — reordering for both audio (timestamp boundaries) and video (marker-bit frame detection)
• Auto-timestamps — optional automatic RTP timestamp generation for audio and video
• Port allocation — PortAllocator for managed even/odd RTP/RTCP port pairs
• STUN — inline Binding Response for basic ICE connectivity
• Fully typed — PEP 561 py.typed marker included

Installation

pip install aiortp

With optional codecs:

pip install aiortp[opus]   # Opus support
pip install aiortp[g722]   # G.722 wideband

Quick Start — Audio

import asyncio
from aiortp import RTPSession, PayloadType

async def main():
    session_a = await RTPSession.create(
        local_addr=("127.0.0.1", 10000),
        remote_addr=("127.0.0.1", 10002),
        payload_type=PayloadType.PCMU,
    )

    session_b = await RTPSession.create(
        local_addr=("127.0.0.1", 10002),
        remote_addr=("127.0.0.1", 10000),
        payload_type=PayloadType.PCMU,
    )

    def on_audio(data: bytes, timestamp: int) -> None:
        print(f"Received {len(data)} bytes, ts={timestamp}")

    session_b.on_audio = on_audio

    # Send with auto-incrementing timestamps (160 samples/frame for PCMU)
    pcm = b"\x00" * 320  # 160 samples of silence (20ms at 8kHz)
    for i in range(10):
        session_a.send_audio_pcm_auto(pcm)

    await asyncio.sleep(1)
    await session_a.close()
    await session_b.close()

asyncio.run(main())

Quick Start — Video

import asyncio
from aiortp import VideoRTPSession

async def main():
    sender = await VideoRTPSession.create(
        local_addr=("127.0.0.1", 20000),
        remote_addr=("127.0.0.1", 20002),
        codec="h264",  # also "vp8" or "vp9"
        fps=30,
    )

    receiver = await VideoRTPSession.create(
        local_addr=("127.0.0.1", 20002),
        remote_addr=("127.0.0.1", 20000),
        codec="h264",
    )

    def on_frame(data: bytes, timestamp: int, is_keyframe: bool) -> None:
        print(f"Frame: {len(data)} bytes, keyframe={is_keyframe}")

    receiver.on_frame = on_frame

    # Send H.264 NAL units with auto-incrementing timestamps
    sps = bytes([0x67, 0x42, 0x00, 0x1E])
    pps = bytes([0x68, 0xCE, 0x38, 0x80])
    idr = bytes([0x65]) + b"\x00" * 100
    sender.send_frame_auto([sps, pps, idr], keyframe=True)

    await asyncio.sleep(1)
    await sender.close()
    await receiver.close()

asyncio.run(main())

DTMF

# Send
session.send_dtmf("1", duration_ms=160, timestamp=0)

# Receive
def on_dtmf(digit: str, duration: int) -> None:
    print(f"Got DTMF: {digit}")

session.on_dtmf = on_dtmf

Video RTCP Feedback

# Request a keyframe from the remote sender
receiver.request_keyframe()

# Get notified when the remote side requests a keyframe
def on_keyframe_needed() -> None:
    print("Remote requested a keyframe")

sender.on_keyframe_needed = on_keyframe_needed

Port Allocator

from aiortp import PortAllocator, RTPSession

allocator = PortAllocator(port_range=(10000, 20000))

# Session will use an even/odd port pair from the allocator
session = await RTPSession.create(
    local_addr=("0.0.0.0", 0),
    remote_addr=("10.0.0.1", 10000),
    payload_type=0,
    port_allocator=allocator,
)
# Ports are released automatically on close

Codec Registry

from aiortp import get_codec, PayloadType

codec = get_codec(PayloadType.PCMU)  # or PCMA, L16, G722
encoded = codec.encode(pcm_bytes)
decoded = codec.decode(encoded)

Low-Level Packets

from aiortp import RtpPacket, RtcpPacket, is_rtcp

# Parse
packet = RtpPacket.parse(data)
print(packet.sequence_number, packet.timestamp, packet.payload_type)

# Build
packet = RtpPacket(
    payload_type=0,
    sequence_number=1000,
    timestamp=8000,
    ssrc=0xDEADBEEF,
    payload=b"\x80" * 160,
)
data = packet.serialize()

# Demux RTP vs RTCP
if is_rtcp(data):
    rtcp_packets = RtcpPacket.parse(data)

Video Depacketizers (Standalone)

from aiortp import H264Depacketizer, VP8Depacketizer, VP9Depacketizer

# H.264: feed RTP payloads, get NAL units
depkt = H264Depacketizer()
nals = depkt.feed(rtp_payload, marker=is_last_packet)

# VP8/VP9: feed RTP payloads, get (frame_data, is_keyframe) tuples
depkt = VP8Depacketizer()
frames = depkt.feed(rtp_payload, marker=is_last_packet)

Examples

See the examples/ directory:

• loopback.py — two sessions exchanging G.711 audio on localhost
• dtmf.py — sending and receiving DTMF digits
• codec_roundtrip.py — encode/decode with each built-in codec
• raw_packets.py — low-level RTP/RTCP packet construction
• send_wav.py — stream a WAV file over RTP

License

MIT. See LICENSE for details.