antennaknobs 0.12.0

Scriptable antenna design with live, knob-driven tuning

AntennaKNoBs  ·  by KK7KNB

Script your antenna. Explore it in real time by turning knobs.

AntennaKNoBs is a Python package for parametric, programmatic antenna design. You describe an antenna once as a small Python builder — its geometry expressed in terms of named parameters — and then explore the design space two ways:

• In code, from the command line or a Python script: draw geometry, sweep a parameter, compare radiation patterns, optimize for match or gain, export a NEC deck.
• In the browser, from a live workbench: drag a knob and watch the 3D wire model, far-field patterns, and Smith chart redraw in real time.

Its built-in engine is momwire, a new in-house set of method-of-moments engines. You can optionally add PyNEC (the battle-tested NEC2 engine) as a second backend and solve the same design both ways to trust the answer.

---

The live web workbench

It's live at app.antennaknobs.dev — open it, pick a design, and drag a knob (no install).

The workbench is the fastest way to feel a design. Pick an antenna, and its parameters appear as a panel of knobs. Drag one and every view updates live over a WebSocket: the solver re-runs and the browser redraws.

What you get:

• A panel of knobs. Every builder parameter becomes a knob (or dropdown, or checkbox) with sensible min/max/step. Drag and the design re-solves.
• 3D wire geometry with current visualization, viewable from three orthogonal projections (top / front / side).
• Azimuth and elevation far-field pattern slices.
• A Smith chart of input impedance, with optional frequency-sweep and convergence overlays.
• Three solver slots (A / B / C) you can point at different backends and compare side by side — e.g. momwire triangular vs. B-spline vs. PyNEC on the same antenna, at once.

Live updates stay responsive because rapid knob drags are coalesced into one solve per round-trip, so the solver is never buried under stale requests.

Running it

The workbench is a FastAPI backend plus a React (Vite) frontend.

Installed (no Node needed). A wheel install bundles the pre-built frontend, so one process serves the whole app:

pip install "antennaknobs[web]"
uvicorn antennaknobs.web.server:app      # open http://127.0.0.1:8000

The backend serves the UI at / and the JSON//ws API on the same origin; /docs is the interactive API explorer.

Development (two terminals, hot-reload). When editing the frontend, run the Vite dev server alongside the backend so you get HMR:

# Terminal 1 — backend (from the repo root, in your .venv)
pip install -e ".[web]"
uvicorn antennaknobs.web.server:app --reload   # API on http://127.0.0.1:8000

# Terminal 2 — frontend dev server
cd src/antennaknobs/web/frontend
npm install
npm run dev                              # open http://localhost:5173

The Vite dev server proxies the API and the /ws live-solve channel to the backend on port 8000, so you only ever open http://localhost:5173. (A source checkout has no pre-built bundle, so the backend alone runs API-only until you npm run build — which writes src/antennaknobs/web/static/, the same bundle the wheel ships.)

The [web] extra pulls in uvicorn[standard], which includes the WebSocket support the live-solve channel needs — plain uvicorn fails the /ws handshake.

---

Two simulation backends

AntennaKNoBs can solve any design with either backend, selected per-run with --engine (CLI) or per-slot (web). Solving the same antenna two ways is the point — agreement between independent engines is your confidence check.

	PyNEC	momwire
What	Python binding to the compiled C++ NEC2 engine	In-house method-of-moments engines, pure-Python core with optional C++ accelerators
Basis	NEC2 thin-wire (pulse/sinusoidal)	Three bases — triangular (tent), sinusoidal, B-spline — plus H-matrix and array-block accelerators built on them
Speed	Very fast single-frequency solves	Fast; C++ accelerators (pybind11) for assembly/quadrature, pure-Python fallback
Ground	Sommerfeld–Norton finite ground (default)	PEC image method; free space by default
Install	Prebuilt wheel from the python-necpp fork release (OpenBLAS vendored)	C++ accelerator built from the momwire submodule
Use it for	The established reference; finite-ground patterns	Basis-flexible cross-validation; geometries where NEC2 reactance fails to converge

Selecting an engine (CLI):

--engine momwire                 # momwire (default), default triangular basis
--engine momwire:triangular      # piecewise-linear (tent) basis  — the momwire default
--engine momwire:sinusoidal      # NEC2-style three-term basis (cross-validator)
--engine momwire:bspline         # degree-1/2 B-spline Galerkin basis
--engine momwire:hmatrix         # B-spline + hierarchical-matrix (ACA) acceleration
--engine momwire:arrayblock      # element-aware block solver for arrays
--engine pynec                   # NEC2 via PyNEC (needs the optional pynec-accel)

In Python, instantiate an engine directly:

from antennaknobs.engines import PyNECEngine, MomwireEngine
from momwire import BSplineSolver

engine = PyNECEngine(builder)
engine = MomwireEngine(builder, solver=BSplineSolver, solver_kwargs={"degree": 2})

momwire lives in its own repository and is vendored here as a git submodule; its primary TriangularSolver engine converges to NEC accuracy in ~80 segments and is validated against the independent B-spline basis. The H-matrix and array-block engines are newer and aimed at large arrays. PyNEC is an optional second backend — the python-necpp fork, distributed as a self-contained wheel (OpenBLAS vendored, so no SWIG/BLAS/autotools toolchain is required at install time). It is licensed GPL-2.0 and installed separately from its own release; antennaknobs (MIT) neither bundles nor depends on it, and loads it only if present.

---

Designing antennas in code

An antenna is a subclass of AntennaBuilder that declares named parameters and builds its wires from them. Because the geometry is computed from parameters in ordinary Python, you specify physical coordinates a minimal number of times — the rest follow by reflection and relative position. (Most antenna tools make you type six absolute coordinates per wire.)

For path-shaped geometry (loops, vees, rhombics) you can describe the walk instead of the coordinates, with the Drone 3D-turtle — see the Drone & Transform reference.

Here is the built-in Moxon beam (beams.moxon), abbreviated. Four parameters describe the rectangle; helper functions negate coordinates (rx, ry) and chain nodes into wires (build_path):

from ... import AntennaBuilder
from types import MappingProxyType


class Builder(AntennaBuilder):
    default_params = MappingProxyType(
        {
            "freq": 28.57,
            "base": 7.0,
            "halfdriver": 2.4597430629596713,   # length of one radiating side
            "aspect_ratio": 0.3646010186757216,  # short side / long side
            "tipspacer_factor": 0.07729647745945359,
            "t0_factor": 0.4078045966770739,
        }
    )

    def build_wires(self):
        eps = 0.05
        base = self.base

        long = 2 * self.halfdriver / (1 + 2 * self.aspect_ratio * self.t0_factor)
        short = self.aspect_ratio * long
        tipspacer = short * self.tipspacer_factor
        t0 = short * self.t0_factor

        def build_path(lst, ns, ex):
            return ((a, b, ns, ex) for a, b in zip(lst[:-1], lst[1:]))
        def rx(p): return -p[0], p[1], p[2]   # mirror across x
        def ry(p): return p[0], -p[1], p[2]   # mirror across y

        S = (short / 2, eps, base)
        A = (S[0], long / 2, base)
        B = (A[0] - t0, A[1], base)
        C = (B[0] - tipspacer, B[1], base)
        D = rx(A)
        E, F, G, H, T = ry(D), ry(C), ry(B), ry(A), ry(S)

        n_seg0, n_seg1 = 21, 1
        tups = []
        tups.extend(build_path([S, A, B], n_seg0, None))
        tups.extend(build_path([C, D, E, F], n_seg0, None))
        tups.extend(build_path([G, H, T], n_seg0, None))
        tups.append((T, S, n_seg1, 1 + 0j))   # the driven segment
        return tups

The top-level package re-exports the workhorse functions, so a full design-explore-compare loop is a short script. This optimizes an inverted-V dipole at several heights and overlays the resulting patterns:

import antennaknobs as ant
from antennaknobs.designs.dipoles.invvee import Builder

p = dict(Builder.default_params)
bounds = ((p['length_factor'] * .8, p['length_factor'] * 1.25), (0, 60))

builders = (
    ant.optimize(
        Builder(dict(p, base=base)),
        ['length_factor', 'angle_deg'], z0=50, bounds=bounds,
    )
    for base in [5, 6, 7, 8]
)

ant.compare_patterns(builders)

---

Command-line usage

Everything is under python -m antennaknobs <subcommand>. Designs are named family.name (with an optional :variant) — run list to see them all.

# Draw a Moxon's wire geometry to a file
python -m antennaknobs draw --builder beams.moxon --fn moxon.png

# Sweep frequency and plot impedance on a Smith chart
python -m antennaknobs sweep --builder beams.moxon --param freq \
    --use_smithchart --npoints 21 --fn moxon_smith.png

# Far-field pattern of a Yagi, solved with momwire
python -m antennaknobs pattern --builder beams.yagi --engine momwire:triangular

# Overlay patterns of three beams
python -m antennaknobs compare_patterns \
    --builders beams.moxon beams.hexbeam beams.yagi --fn beams.png

# Cross-check one design across two backends
python -m antennaknobs compare_patterns \
    --builders beams.moxon beams.moxon --engines pynec momwire:bspline --fn check.png

# Optimize length and arm angle of an inverted-V dipole for a 50 Ω match
python -m antennaknobs optimize --builder dipoles.invvee \
    --params length_factor angle_deg

# Export a NEC2 card deck for use in external tools
python -m antennaknobs export --builder beams.hexbeam --out hexbeam.nec

# List the available designs (optionally filter)
python -m antennaknobs list
python -m antennaknobs list dipole

Shared flags: --engine (backend, see above), --ground (free | pec | finite | finite:<eps_r>,<sigma>), --builder/--builders, and --fn (save to file instead of showing on screen).

Below is a typical far-field plot produced by the pattern/compare_patterns commands:

Available designs

Roughly 70 built-in designs across nine families — run python -m antennaknobs list for the authoritative list:

Family	Examples
dipoles	invvee, folded_invvee, ocf_dipole, koch_dipole, dipole_turnstile
beams	moxon, hexbeam, yagi, hb9cv
loops	quad, delta_loop, diamond_loop, horizontal_loop, bisquare
verticals	vertical, jpole, inverted_l, bobtail, four_square, bruce
arrays	yagiarray, moxonarray, invveearray, bowtiearray, delta_looparray
multiband	fandipole, trap_dipole, hexbeam_5band, twoband_fan_dipole
broadband	discone, g5rv, lpda, t2fd
wire	sterba, rhombic, vbeam, w8jk, zepp, lazy_h, longwire
specialty	hentenna, bowtie, helix, hourglass

User-authored designs (in the user.* namespace) appear here too; filter with list --builtin-only / list --user-only. Drop a Python file in ~/.antennaknobs/designs/ and it shows up in the workbench — see Writing designs with Claude Code for the contract and how to have Claude Code write one from a plain-language description.

---

Install

From PyPI (prebuilt wheels — no toolchain)

antennaknobs and its C++ engine momwire are published to PyPI with prebuilt wheels, so a plain install needs no compiler:

python3 -m venv .venv && source .venv/bin/activate
pip install --upgrade pip

# antennaknobs + the web workbench; momwire (the engine) comes along as a dep
pip install "antennaknobs[web]"

Optionally, add the NEC2 solver (PyNEC) as an alternative to momwire:

# optional NEC2 solver (Linux / Windows / macOS-arm64 wheels)
pip install "pynec-accel>=1.7.4.post2"

Then launch the workbench with uvicorn antennaknobs.web.server:app (see Running it). On macOS, brew install libomp is required — the momwire and pynec-accel wheels link Homebrew's OpenMP runtime (and share it, so cross-engine use is fully multithreaded; details under macOS).

The sections below build from source instead (a development checkout, or a platform without prebuilt wheels).

Ubuntu (22.04 / 24.04)

PyNEC installs as a prebuilt wheel, so no SWIG/BLAS/autotools toolchain is needed; only the momwire C++ accelerator compiles from source (hence g++).

1. System dependencies

sudo apt-get update
sudo apt-get install \
    python3 python3-pip python3-venv python3-dev \
    g++ build-essential git

2. Clone and create a virtual environment

git clone https://github.com/stevenmburns/antennaknobs
cd antennaknobs
python3 -m venv .venv
source .venv/bin/activate
pip install --upgrade pip
pip install setuptools numpy scipy pytest matplotlib icecream scikit-rf

3. Install momwire (the engine)

# momwire: a git submodule; its C++ accelerator builds from source.
pip install pybind11
git submodule update --init momwire
pip install --no-build-isolation -e ./momwire

3b. (Optional) Install PyNEC for cross-validation

PyNEC is an optional second backend — GPL-2.0, installed separately from its own release, and never bundled with or required by antennaknobs. Skip it and momwire is still fully functional; install it only if you want to cross-check against NEC2.

# The fork is published to PyPI as `pynec-accel` (a distinct name from upstream
# PyNEC/pynec, whose builds are broken on current Python; the import name stays
# `import PyNEC`). Its wheels vendor OpenBLAS + libgfortran.
#
# Use >= 1.7.4.post2: earlier builds vendored their own libgomp, which clashes
# with momwire's system libgomp via a static-TLS limit and silently knocks
# momwire's C++ accelerator onto its slow pure-Python path whenever both backends
# load in one process. post2 binds the system libgomp instead (universal on glibc
# Linux — the GCC OpenMP runtime).
pip install "pynec-accel>=1.7.4.post2"

4. Install AntennaKNoBs

pip install -e ".[test]"         # core + test deps (pytest, the web test client)
# or  pip install -e ".[web]"    # just the web workbench, no test extras
# or  pip install -e .           # library only

5. Run the tests

pytest -vv --durations=0 -- tests/

(The [test] extra above is what makes this step work from a clean clone — it pulls in pytest, the [web] server deps, and httpx2 for the web-server tests' TestClient.)

The authoritative, always-tested version of this whole sequence is the CI workflow at .github/workflows/test.yml — it installs both engines and runs the suite on every push. If anything here drifts, that file is the source of truth.

macOS

Tested on Apple Silicon (arm64), macOS 14+. The momwire C++ accelerator compiles from source against Homebrew's OpenMP runtime (libomp); PyNEC installs as a prebuilt wheel. CI only runs Ubuntu, so the Ubuntu sequence above is the source of truth — the steps below are the same with macOS system packages.

1. System dependencies

xcode-select --install              # clang/clang++ + git (skip if already installed)
brew install python git libomp      # libomp = the OpenMP runtime the momwire accelerator links

2. Clone and create a virtual environment. Use a venv — on macOS it is effectively required, not just good hygiene: Homebrew's Python is marked externally managed (PEP 668), so pip install into it fails with an error: externally-managed-environment. A venv sidesteps that and keeps the project's dependencies off your system Python.

git clone https://github.com/stevenmburns/antennaknobs
cd antennaknobs
python3 -m venv .venv
source .venv/bin/activate         # re-run this in each new shell before using the project
pip install --upgrade pip setuptools wheel
pip install numpy scipy pytest matplotlib icecream scikit-rf

3. Install momwire (the engine) — same as Ubuntu:

pip install pybind11
git submodule update --init momwire
pip install --no-build-isolation -e ./momwire

The build finds Homebrew's libomp at /opt/homebrew/opt/libomp, the Apple Silicon default. On an Intel Mac, Homebrew lives under /usr/local, so point the build there with LIBOMP_PREFIX:

LIBOMP_PREFIX=/usr/local/opt/libomp pip install --no-build-isolation -e ./momwire

If the accelerator fails to build for any reason, momwire still installs and runs in its slower pure-Python mode.

3b. (Optional) Install PyNEC for cross-validation

The same optional GPL-2.0 second backend as on Linux. The fork ships prebuilt macOS wheels for Apple Silicon (arm64), macOS 14+, Python 3.10–3.14 only — there are no Intel-Mac wheels, so on an Intel Mac skip PyNEC and use momwire alone.

pip install "pynec-accel>=1.7.4.post2"

With pynec-accel ≥ 1.7.4.post2 and momwire ≥ 0.2.1, neither wheel vendors its own libomp — both link Homebrew's by absolute path, so a process that loads both (any cross-engine run, including the tests) shares a single OpenMP runtime and stays fully multithreaded, with no env vars. That shared runtime is why brew install libomp is required.

Older macOS wheels each bundled a private libomp; two copies in one process abort with OMP: Error #15 (or, with KMP_DUPLICATE_LIB_OK=TRUE, deadlock). If you're pinned to a pre-1.7.4.post2 pynec-accel or pre-0.2.1 momwire, the stopgap is export KMP_DUPLICATE_LIB_OK=TRUE and export OMP_NUM_THREADS=1 before any cross-engine run — at the cost of a single-threaded accelerator.

4. Install AntennaKNoBs and 5. Run the tests — identical to the Ubuntu steps:

pip install -e ".[test]"
pytest -vv --durations=0 -- tests/

(For the web workbench's frontend dev server, also brew install node.)

---

Acknowledgments

Most of this codebase — the AntennaBuilder framework, the design catalog, the momwire engine bindings, the web workbench, and these docs — was written with Claude Code, Anthropic's agentic coding tool, working from KK7KNB's direction and antenna-engineering judgment.

License

MIT — see LICENSE.