apitap

Move whole tables between databases at wire speed, in bounded memory.

apitap is an open-source transfer engine — a Rust core with Python bindings, in the spirit of Polars. It moves data the way the databases themselves would: raw wire-format streams, parallel range pipes, atomic swaps, and memory that stays flat no matter how big the table is.

pip install apitap

import apitap

report = apitap.transfer(
    "postgres://user:pass@src-host/db",
    "clickhouse://user:pass@warehouse/db",
    table="public.events",
)
print(f"{report.rows:,} rows in {report.elapsed_ms} ms over {report.parallel} pipes")

Try it before you install it

apitap.dev/lab runs this exact wheel — alongside ingestr and dlt, each pip-installed next to it — against a seeded Postgres and ClickHouse, in your browser. Pick a tool, pick the container it runs in (1 GB / 2 vCPU or 256 MB / 0.5 vCPU), press run, and watch the engine's own output. Every result is row-count-verified before a number appears.

That box picker is the point — it limits the tool, not the databases:

dlt materializes the result set, so it dies before the data arrives; ingestr streams and survives but crawls; apitap barely notices the box — it is marginally faster on the small one, because fewer vCPUs means fewer pipes and less insert contention at the destination.

And it holds at scale: 100 GB — 232M rows — through that same 256 MB / 0.5 vCPU container in 8m57s, peak RSS 170.8 MB, every row checksum-verified; on that table ingestr v1.1.14 and dlt 1.29.1 (pyarrow) are OOM-killed in ~21 s. Peak memory is pipes × chunk_bytes, never table size — the same 100 GB also lands inside a 44 MB container. Give it real hardware and the same zero-config call does the same 100 GB in 30.3 seconds (~3.3 GB/s, three dedicated GCE machines — where the alternatives had landed zero rows when cut). v0.15.0 additionally auto-thins chunks on memory-capped boxes (128 MB tier: 2.5× faster than v0.14.0) and fixes a silent hang against MySQL 8.4 servers. Ladder, methodology and raw logs: benchmarks/profiling.md · gcp-benchmark.md.

Routes

Six sources × seven destinations, enforced by a test that fails the build if any pair is neither implemented nor explicitly deferred with a reason.

Sources: postgres:// · mysql:// · clickhouse:// (→ ClickHouse today) · gsheets:// (tabs as tables) · github:// (repo CSVs as tables) · github+api:// (issues, PRs, commits, stars … as typed tables)

Destinations: postgres:// · mysql:// · clickhouse:// · bigquery:// · gcs:// (CSV.gz or Parquet) · s3:// (S3-compatible — AWS, MinIO, R2, OVH/Scaleway/Hetzner object storage; Parquet, SigV4-signed, no SDK) · iceberg:// (Apache Iceberg via any REST catalog — Lakekeeper, Polaris, Nessie, Glue, R2 Data Catalog, S3 Tables; replace, append and merge are all real snapshot commits, incremental state rides in the table itself)

Each pair negotiates the fastest wire format both sides speak — for example:

Every transfer stages and swaps in atomically — readers never see a partial table, an empty source never wipes a good one, and a mid-run failure leaves the previous table untouched.

How fast?

10M rows, every tool capped at 16 vCPU / 4 GB, auto settings, stock Docker databases — measured from the published wheel, every number checksum-validated across engines:

¹ dlt's pyarrow backend refuses MySQL DOUBLE without hand-written schema hints; its connectorx backend was OOM-killed on all four routes at the same 4 GB cap. ² dlt has no native MySQL destination; via its documented sqlalchemy path it is 28–52× slower (measured at 1M).

Full methodology, validation queries, and honest caveats — including what these runs do not show: benchmarks/README.md.

API

apitap.transfer(
    src, dst, table=None, *,
    tables=None,         # a list of tables, or…
    schema=None,         # …a whole schema — one shared resource budget
    dest_table=None,     # defaults to `table`
    mode="replace",      # "append"/"merge" incremental · "log_based" batch CDC
    cursor=None,         # auto: integer PK; PK-less Postgres uses TID ranges
    parallel=None,       # auto: CPU- and memory-aware; an explicit value wins
    chunk_bytes=None,    # per-send coalescing, default 4 MiB
    durable=True,        # False = UNLOGGED staging on Postgres dests (~-30% wall)
    engine=None, order_by=None, on_cluster=None,   # ClickHouse DDL
) -> TransferReport      # .rows, .elapsed_ms, .parallel, .tables

mode="append" loads only rows past the last synced watermark; mode="merge" upserts the delta by primary key. mode="log_based" is batch CDC for Postgres and MySQL sources. Postgres: the first run creates a logical replication slot and bootstraps with a full load pinned to the slot's exported snapshot (no gap, no duplicates). MySQL: the binlog coordinate is captured before an idempotent full load — same guarantee, no slot needed. Every later run drains the log delta — inserts, updates (PK changes included), deletes, TRUNCATEs, TOAST handled — and applies it set-based in one destination transaction that also advances the LSN watermark. Schedule the same call from cron/Airflow; no daemon. The watermark lives in _apitap_state — a plain, queryable table in the destination database, one row per (table, source), written in the same transaction as the data on Postgres and BigQuery (BigQuery lands each window in a staging table and applies one MERGE — it needs a project with billing, since CDC uses row-level DML). On Iceberg it lives in the table's own properties, committed in the same snapshot as the data. No local state files, no opaque blobs, no extra columns in your rows. A 1M-row delta lands on a 10M-row table in ~10 s — cost is proportional to the delta, not the table.

Into an analytical destination you can also ask for changelog=True: instead of keeping ClickHouse or BigQuery a replica, apitap appends every operation with an _apitap_op column (I/U/D/T, plus B for the bootstrap baseline) and a <table>__current view that derives the current state. Nothing is ever updated or deleted — so ClickHouse never mutates a part and BigQuery never runs a MERGE (a window becomes a load job plus one INSERT … SELECT; it still needs a billed project, since INSERT is DML). The log is partitioned by time (monthly by default; partition_by/order_by override it), and you keep the history a replica throws away. Measured free on the Postgres lane and 34% faster on the MySQL one (ledger).

Multi-table runs share one pipe budget, so peak memory is a single table's ceiling no matter how many tables you pass. Each table lands atomically and independently: one failure never poisons its siblings.

The GIL is released for the whole transfer. Errors are ValueError for bad input (unknown table, unsupported type — always at probe time, never mid-copy) and RuntimeError for transfer failures.

apitap.read() → Arrow / polars

df = apitap.read(src, table="events").to_polars()    # polars DataFrame

# tables BIGGER than RAM: one line, ordinary polars, streaming underneath —
top = (apitap.read(src, table="events").lazy()
       .filter(pl.col("amount") > 100)
       .group_by("status").agg(pl.len())
       .collect(engine="streaming"))

# MySQL reads the same way — and joins ACROSS engines are just polars:
orders = apitap.read("postgres://…", table="orders").lazy()
events = apitap.read("mysql://…", table="events").lazy()
daily = orders.join(events, on="id").group_by("day").agg(pl.len()).collect(engine="streaming")

# land a FILTERED projection straight to Parquet, streaming end to end:
(apitap.read(src, table="events").lazy()
 .filter(pl.col("amount") > 100).select("id", "amount")
 .sink_parquet("events.parquet", compression="zstd"))

apitap.read(src, table="events").to_parquet("events.parquet")  # full-table dump
tbl = apitap.read(src, table="events").to_arrow()              # pyarrow Table

The same parallel pipes every transfer route uses feed Rust-side Arrow column builders; batches cross into Python zero-copy through the Arrow C stream protocol (__arrow_c_stream__), so polars, pyarrow, duckdb and pandas consume the reader natively — the wheel depends on none of them. Postgres rides raw binary COPY; MySQL rides its own hand-rolled wire client — binary-protocol rows decode straight off the socket into the column builders (no driver, no per-row allocations). .lazy() registers the stream as a polars scan and pushes the query's COLUMN PROJECTION all the way into the SQL: a query touching 2 of 15 columns makes the server serialize and this side decode only those 2 — and as of 0.26, the FILTER pushes too: a conservative subset of the predicate (arithmetic, comparisons, AND/OR) becomes a SQL WHERE, so the server skips serializing rows the query was going to drop (a 50M-row %3 filter

• group_by fell from 11.9 s to 7.0 s on half a core; anything the translator can't prove safe simply stays a client-side filter). The compute itself (filter/group/join) stays in polars, and no loop ever appears in your code. Typed end to end (int16/32/64, float32/64, bool, decimal128, date32, timestamp µs, utf8, binary); uuid/jsonb/exotics arrive as text, so every table reads. Measured on the bench box: 10M rows → polars in 14.9 s (connectorx 55.9 s, pandas 295 s, same box). In a 0.5 vCPU / 256 MB container: ten million Postgres rows stream through in 13.2 s flat at ~100 MB; 11.8 million MySQL rows (15 columns, string-heavy) stream through in 29 s at 126 MB on the same half core — count-style thin scans in 3.4 s — where driver-based readers take 51 s for the same drain; a real .lazy() filter + group_by lands in 2.4 s — and the same query over FIFTY million rows in 9.9 s at a flat ~180 MB, tying raw SQL run inside Postgres itself. The lazy plan also SINKS: 50M rows filtered and landed as Parquet in 34 s inside that same container, row-count-verified against the database. Cross-engine works at scale — a Postgres-50M × MySQL-50M join (one polars expression, 100M rows, digit-verified) runs in 165 s on 4 cores, and two engines extract CONCURRENTLY: 50M from Postgres + 50M from MySQL, aggregated per day and joined across engines, 154 s total on the half-core / 256 MB box — the Postgres leg hides entirely inside the MySQL scan. Alternatives, same cage, same query, same digits: plain polars (read_database_uri/connectorx) is OOM-killed at 256 MB — and needs 1–2 GB before it survives at all; ADBC (iter_batches) does stream, but single-connection: 45.2 s where apitap takes 9.9 s (4–5× across every shape we measured). parallel=1 preserves source order; cursor= picks the split column; columns= reads a projection directly.

Full usage guide — connection URLs, per-route type mappings, incremental semantics, troubleshooting: docs/usage.md.

Roadmap

• The route mesh — Postgres, MySQL, Google Sheets, GitHub files and the GitHub API into Postgres, MySQL, ClickHouse, BigQuery, GCS, S3-compatible object stores (MinIO, R2, …) and Apache Iceberg
• Incremental sync — mode="append" / mode="merge" (transactional state table)
• Batch CDC — mode="log_based": log drains on a schedule, every operation captured, snapshot-pinned bootstrap, a crash-safe watermark committed with the data. Postgres (logical replication) and MySQL (binlog) sources, into Postgres/ClickHouse/MySQL — the MySQL race: a 650K-event backlog caught up in 15.6 s on 0.5 vCPU / 256 MB where ape-dts did not converge in 900 s; windows fit a 64 MB container
• Apache Iceberg destination — overwrite/append/row-delta snapshots on any REST catalog; watermarks committed as table properties in the same snapshot as the data; bootstrap from parquet footer stats (picks up incremental on tables written by Spark/Trino/pyiceberg too)
• Multi-table and whole-schema transfers under one memory budget
• ClickHouse table engines — engine=, order_by=, on_cluster=
• apitap.read() → Arrow / polars / pyarrow / duckdb — zero-copy Arrow C stream, 10M → polars 14.9 s (connectorx 55.9 s); .lazy() runs ordinary polars queries with projection pushdown — 50M rows, filter+group_by, 0.5 vCPU / 256 MB: 9.1 s; .to_parquet() streams a table to a file at constant memory; columns= for direct projections
• MySQL source for read() — a hand-rolled wire client decodes binary-protocol rows straight into Arrow, 1.8× a driver-based full drain (5.5× on thin scans) at 0.5 vCPU / 256 MB; cross-engine joins (MySQL × Postgres) are one ordinary polars expression
• query= for read() (arbitrary SQL, not just tables)
• Snowflake destination
• aarch64 + macOS wheels

License

MIT. Source: github.com/apitap/apitap-lib.