argus-forge 0.1.1

Training bridge: turn curated dataset exports into ready-to-run LoRA training configs (kohya_ss / OneTrainer / diffusers)

argus-forge

Training bridge: turn curated dataset exports into ready-to-run LoRA training configs (kohya_ss / OneTrainer / diffusers).

Part of the Argus suite. argus-curator's /curate UI already computes suggested SDXL hyperparameters from the selected set (size, category); forge closes the gap between "export" and "train" by handing over a runnable config instead of numbers on a screen.

argus-quarry  ->  argus-curator  ->  argus-lens  ->  argus-forge  ->  your trainer
  acquire          curate/export      caption          configs          LoRA

What it does

Point it at a curator export directory (images + manifest.jsonl + .txt caption sidecars) and it emits trainer-native config files, with hyperparameters seeded from the same selection-insight heuristics the /curate UI shows (dataset size x target category -> repeats/epochs/LR/dim/alpha):

Trainer	Emits
kohya	dataset.toml + config.toml (+ train.sh for sdxl_train_network.py)
onetrainer	concepts.json + partial config.json to load in the UI
diffusers	metadata.jsonl (HF imagefolder) + train.sh for train_text_to_image_lora_sdxl.py

Along the way it:

• validates the manifest (manifest_version-aware — refuses an incompatible major),
• collects captions: argus-lens writes .txt sidecars next to the source images, so forge copies them next to the exported copies trainers actually read,
• warns when a flattened export collided on basenames (several manifest rows -> one file on disk) and leaves the ambiguous file uncaptioned instead of pairing it with the wrong caption,
• emits one kohya subset per image directory (kohya's glob doesn't recurse — a structure-preserving export would otherwise train zero images),
• falls back gracefully to a bare folder of images with no manifest,
• resolves the base checkpoint from the manifest's target_profile.checkpoint (or the SDXL base).

Everything lands in <export>/forge/<trainer>/ (plus metadata.jsonl at the dataset root for diffusers).

Install

uv pip install "argus-forge[cli]"          # CLI
uv pip install "argus-forge[cli,server]"   # + HTTP server for argus-studio

Or run the published image (serves :8103 with --cors, and defaults its export root to /data/out):

docker run --rm -p 8103:8103 -v /path/to/out:/data/out ghcr.io/smk762/argus-forge:latest
docker compose up          # local build; see docker-compose.yaml (and .env.example) for the knobs

The image contains no trainer, so it defaults to demo-safe mode — configs render, training is refused and nothing is written. That default lives in the image itself (ARGUS_FORGE_READONLY=1), so a bare docker run is as locked down as docker compose up; the port is published on 0.0.0.0 and a run is real code execution on the host, so the safe direction is the default one. Set ARGUS_FORGE_READONLY=0 on a trusted host once you have mounted a trainer.

CLI

argus-forge inspect /data/out                          # what's in this export?
argus-forge config /data/out --trainer kohya           # emit configs
argus-forge config /data/out -t diffusers --dry-run    # preview without writing
argus-forge config /data/out --trigger "zxq person" --network-dim 32 --epochs 8
argus-forge trainers                                   # list emitters
argus-forge run /data/out --trainer kohya \
  --env SD_SCRIPTS_DIR=~/kohya-ss/sd-scripts             # run the forged train.sh, streaming progress

run shells out to the forged train.sh (kohya / diffusers; OneTrainer is driven from its own UI) and streams the trainer's output. It exits with the trainer's own exit code, so it slots into scripts and CI; --dry-run prints the command without executing, and --json streams raw NDJSON RunEvents.

Server (argus-studio integration)

Start the FastAPI micro-server on :8103 (peer to lens :8100, curator :8101, quarry :8102):

argus-forge serve --cors --export-root /data/out

--export-root is required by the API: a request's export_dir is untrusted, so it must name a directory under this one, and every /inspect, /config and /run refuses with 400 until it is set. Without the fence, POST /config would forge a tree into any directory the caller names. Also settable as ARGUS_FORGE_EXPORT_ROOT (FORGE_EXPORT_PATH is a legacy alias); the published image defaults it to /data/out. The CLI is unconstrained by design — it is your own shell, not a request.

Containment is decided on the fully resolved path, so a symlink pointing out of the root is refused rather than followed, and the root itself is not a valid export_dir (a blank field would otherwise mean "treat the whole shared volume as one dataset"). The path handed to the emitters keeps your spelling, though — path_map prefixes are matched against it, so a symlinked root like /data/out -> /mnt/big/out still rewrites correctly. The manifest's abs_path caption sources are fenced to the same root: forge will not copy a sidecar from outside it into your dataset.

--cors matters: the studio frontend calls forge cross-origin (browser on :3000 → forge on :8103), and CORS is opt-in — without it the ExportPanel fails with "Failed to fetch" even though curl works fine. (The Docker image passes --cors already; this applies to the pip-installed path.)

A bare --cors allows the localhost:3000 dev frontend. Name other origins with --cors-origin (repeatable, or FORGE_CORS_ORIGINS=a,b); they are added to the localhost defaults, not swapped for them. Entries are compared to the Origin header a browser actually sends, so a trailing slash or stray whitespace is normalised away rather than silently never matching.

--cors-any allows any origin credential-less — anonymous reads from anywhere, for a public demo. A literal * in the allow-list takes that same path rather than becoming credentialed origin reflection. It never grants a cross-site write to an origin you did not name — but origins you did name keep theirs. That pairing is what a public demo needs, because every endpoint that does anything in forge (/inspect, /config) is a POST:

argus-forge serve --cors-any --cors-origin https://demo.example --no-run --export-root /data/out

CORS is not a write boundary. A cross-origin POST with a CORS-safelisted content type is sent with no preflight, so any page your browser visits can drive an unauthenticated LAN server; the same-origin policy only stops it from reading the reply. So unsafe methods are additionally gated on Origin: absent (curl, the CLI, server-to-server) or same host:port or allow-listed → through; anything else → 403.

Route	Purpose
GET /health	liveness + version + export root + whether training is enabled
GET /trainers	supported trainers + emitted files
POST /inspect	look at an export dir (counts, manifest, suggested params)
POST /config	render configs; dry_run: true returns contents without writing
POST /run	start the forged train.sh on a background job; returns the run's RunState (with run_id) — the run outlives the request
GET /runs	list tracked runs
GET /run/{id}	a run's status (poll for the terminal status + returncode — the argus-proof join)
GET /run/{id}/stream	attach to a run: NDJSON RunEvents, the retained tail then live; reconnect anytime
POST /run/{id}/cancel	stop a run (SIGTERM→SIGKILL its process group)

A run is started once (POST /run) and watched — or re-watched after a dropped connection — via GET /run/{id}/stream; a client going away never stops the run. run_id (also on the stream's X-Training-Run-Id header) is the join key for the argus-proof handoff. The /curate page's ExportPanel in argus-studio uses /config to forge a config right after an export (docker compose --profile forge up).

The local CLI argus-forge run streams live in your terminal and is independent of the server registry.

Demo-safe mode (no training)

POST /run executes a script on the host. It runs a forged train.sh on the shared dataset volume — the same single-user LAN assumption as /config — but it is not sandboxed: treat reaching the port as equivalent to shell access on the host.

So a host that should render configs but never train — a public demo, a box with no GPU or no sd-scripts — starts forge in demo-safe mode:

argus-forge serve --cors --no-run       # or: ARGUS_FORGE_READONLY=1 argus-forge serve --cors

/inspect and /config keep working; every /run route refuses with 403 and a message saying training is disabled on this host. The refusal is middleware, so it lands before the request body is validated — on such a host a malformed request deserves the same answer as a well-formed one — and it covers /run routes added later without a per-route guard to forget.

Demo-safe also means write-safe: POST /config is forced to dry_run, so it renders and returns the files but never touches the volume, and says so in warnings — a caller that asked for a real write learns it did not happen from the body, not by noticing every file's path is null. Forge has no authentication, so on a publicly reachable host an ordinary curl would otherwise overwrite the curator's metadata.jsonl and leave an executable train.sh behind on shared storage.

GET /health reports "training": "enabled" | "disabled", so a frontend can disable its train button up front rather than discovering the refusal by clicking it. The published image turns this mode on by default (and the compose file with it) — it ships no trainer, so a run there could only ever fail. ARGUS_FORGE_READONLY is a protection flag, so it fails safe: a value it cannot parse (=y, =enabled) warns and keeps the guard on rather than quietly enabling writes. Only an explicit 0/false/no/off turns it off.

Container ↔ host paths (path_map)

When forge runs in the compose stack it sees container paths (/data/out/...), but the emitted train.sh / configs are meant to run on the host, where those paths don't exist. Tell forge how to translate:

# per request (CLI: repeatable --path-map; API: "path_map" on POST /config)
argus-forge config /data/out --path-map /data/out=$HOME/argus/out

# or once, via the environment (the compose file can set this from OUTPUT_DIR)
FORGE_PATH_MAP=/data/out=$HOME/argus/out argus-forge serve --cors

Every absolute path rendered into configs (image_dir, output_dir, --train_data_dir, OneTrainer concept paths, ...) gets the longest matching prefix rewritten; the request-level map wins over the env var. The emitted README notes whether a remap was applied.

Develop

make install   # venv + editable install with the "dev,server,cli" extras
make test
make lint

CI / Release

• CI runs via the shared argus-ci reusable workflow (plus argus-forge schema --check to keep the committed wire schema honest).
• Release publishes to PyPI (OIDC trusted publishing) and GHCR on v* tags.
• Versioning is derived from git tags via hatch-vcs — tag vX.Y.Z to cut a release.

This repo was scaffolded from argus-pkg-template. Run copier update to pull template changes (CI, release, tooling).

Roadmap

• argus-proof handoff: post-training validation (argus-studio#4). GET /run/{id} now exposes a run's terminal status + returncode by run_id for the join.
• run registry follow-ups (#13): CLI management commands (runs / --attach / --cancel), an optional single-flight guard, and durable run metadata across restarts.