audient-evo-linux 0.8.3.7

An unofficial Python API/wrapper for the Audient EVO series on Linux.

audient-evo-python

An experimental, unofficial Python API/wrapper for the Audient EVO series 8 (4,16 in the works) USB audio interfaces on Linux.

This library allows direct USB communication with the EVO hardware, replicating the core functionality of the official EVO Mixer software using raw control transfers.

⚠️ DISCLAIMER & Project Status

• This project is a partially reverse-engineered USB control protocol.
• It is not affiliated with or endorsed by Audient.
• The kernel driver is detached while the app is active.
• Crashes or forced exits may leave the device unclaimed until replugged.
• Information may be incomplete or inaccurate; use at your own risk.

Features

• Direct USB communication with EVO firmware
• Input controls: Phantom power (48V), Gain, Mute, Mono
• Output controls: Volume, Mute
• Monitor mixer routing (per input → output)
• Sample‑rate switching (experimental)
• Event polling support
• Input Routing Loopback source persistently changeable

Architecture

The library is built on three logical layers, completely independent of any UI frameworks:

• Evo8Device: High‑level device API. Converts semantic actions into protocol commands.
• EvoProtocol: Pure helper class containing addressing rules and calculators (no USB logic).
• EvoUsbTransport: Low‑level USB transport handling discovery, interface claiming, and control transfers.

Requirements

• Python 3.10+
• Linux
• pyusb

Installation & Setup

1. Install the package:

   pip install audient-evo-linux
   

2. Ensure your user has permission to access the EVO USB device by adding yourself to the audio group:

   sudo usermod -aG audio $USER
   

3. You may also want to copy the udev rule from this projects udev/ directory into /etc/udev/rules.d/:

   SUBSYSTEM=="usb", ATTR{idVendor}=="2708", ATTR{idProduct}=="0008", MODE="0666" # EVO16
   SUBSYSTEM=="usb", ATTR{idVendor}=="2708", ATTR{idProduct}=="0007", MODE="0666" # EVO8
   SUBSYSTEM=="usb", ATTR{idVendor}=="2708", ATTR{idProduct}=="0006", MODE="0666" # EVO4
   

---

Usage Example

from audient_evo import EvoUsbTransport, Evo8Device

transport = EvoUsbTransport()
transport.connect()
evo = Evo8Device(transport)
evo.set_gain(1, 40)  # gain range 0 - 100
evo.set_phantom(1, True)

Channel numbers are 1‑based.

---

References

This project builds upon previous community efforts:

• audient-evo-linux-tools
• evoctl

Huge credit to the developers of those projects for protocol discovery.

---

Source Code Documentation Overview

Key Classes

EvoUsbTransport

Responsible for:

• USB device discovery
• Kernel driver detachment
• Interface claiming / releasing
• Control transfer I/O

Implements context‑manager support for safe cleanup.

EvoProtocol

Pure helper class that:

• Encapsulates EVO firmware addressing rules
• Calculates channel‑based and monitor‑matrix addresses

Contains no USB logic.

Evo8Device

High‑level API intended for UI and scripting:

• Converts semantic actions into protocol commands
• Handles error recovery
• Enforces "app vs OS" control state

---

License

BSD-3-Clause

---

Contributing

Any kind of contribution is always welcome.