AULA F87 Control

Control the lighting of the AULA F87 / F87 Pro mechanical keyboard on Linux and Windows, without AULA's own software.

Features

• Lighting effects. 14 built-in effects in any color or rainbow, with brightness and speed. Changes are sent to the keyboard as you click.
• Per-key colors. Paint individual keys on an on-screen keyboard.
• Music sync. The keys move with whatever your computer is playing, from any app. Styles: EQ bars, meter colors, rainbow, and beat pulse.
• Battery level (over 2.4G) and sleep timer. Keep the backlight always on, or choose when it turns off.
• Side lights effect.
• Top-bar icon (Linux). A quick menu for music sync, keep backlight on, colors, effects and brightness, with the battery % next to the icon. It starts at login and keeps running when you close the window.
• Works over the USB cable and the 2.4G receiver.
• A command line for scripts and shortcuts.
• Needs no drivers and no admin rights once set up. Settings are stored in the keyboard itself, so they stay when you unplug it or use another computer.

Supported keyboards

Tested on Ubuntu 26.04 with an F87 Pro, over both the cable and the 2.4G receiver. Per-key colors were only tested over the cable.

The Windows version runs the same keyboard and audio code through hidapi and soundcard. That code path was tested with the keyboard on Linux. CI checks on Windows that the installer works and the window opens, but the app hasn't been used with a keyboard on a Windows PC yet, so reports are welcome.

Install

Quick install

Linux (Ubuntu, Debian, Fedora, Arch). Paste into a terminal:

curl -fsSL https://raw.githubusercontent.com/RadianceADM/aula-f87-control/main/scripts/install-linux.sh | bash

Windows 10 / 11. Paste into PowerShell (no admin needed):

irm https://raw.githubusercontent.com/RadianceADM/aula-f87-control/main/scripts/install-windows.ps1 | iex

Both scripts install the latest release:

• Linux: the script asks for your password to install the required packages and the udev rule. It then adds AULA F87 Control to the app menu and the aula-f87-control command, and starts the app at login with its top-bar icon.
• Windows: the script installs Python with winget if it's missing, installs the app from PyPI with pip, and adds AULA F87 Control to the Start menu.

Run the same command again to update. To uninstall:

curl -fsSL https://raw.githubusercontent.com/RadianceADM/aula-f87-control/main/scripts/install-linux.sh | bash -s -- --uninstall

$env:AULA_UNINSTALL = 1; irm https://raw.githubusercontent.com/RadianceADM/aula-f87-control/main/scripts/install-windows.ps1 | iex

It's a good habit to read a script before you run it: install-linux.sh, install-windows.ps1. To install by hand instead, follow the steps below.

Ubuntu / Debian (manual)

sudo apt install git python3-gi gir1.2-gtk-4.0 gir1.2-adw-1 python3-numpy pipewire-bin
git clone https://github.com/RadianceADM/aula-f87-control.git
cd aula-f87-control

# Let your user talk to the keyboard without root (one time)
sudo cp udev/70-aula-f87.rules /etc/udev/rules.d/
sudo udevadm control --reload-rules && sudo udevadm trigger

./install.sh

Open AULA F87 Control from the app menu. If the keyboard isn't found, unplug and replug the cable or receiver once, so the new permission applies.

install.sh adds the aula-f87-control command, the app-menu entry and its icon, all running the app from the cloned folder, so keep the folder where it is. It also makes the app start at login with its top-bar icon, and starts it right away. Use ./install.sh --no-autostart to skip both.

• Update: run git pull and then ./install.sh again. This restarts the app.
• Uninstall: run ./install.sh --remove.

On other distributions, install the same packages under their own names, then follow the steps above:

• Fedora: python3-gobject gtk4 libadwaita python3-numpy pipewire-utils
• Arch: python-gobject gtk4 libadwaita python-numpy pipewire

Arch Linux

The package isn't on the AUR yet, because AUR sign-ups are paused for now. You can build the same package straight from this repository:

git clone https://github.com/RadianceADM/aula-f87-control.git
cd aula-f87-control/packaging/aur
makepkg -si

The package installs the udev rule, the menu entry and the icons. Start at login turns itself on the first time you open the app. On GNOME, install gnome-shell-extension-appindicator to get the top-bar icon.

Windows 10 / 11 (manual)

1. Install Python 3.10 or newer from python.org. In the installer, tick "Add python.exe to PATH".

2. Open Command Prompt or PowerShell and run:

   pip install aula-f87-control
   

3. To start the app, press Win + R, type aula-f87-control-gui and press Enter. You can also run aula-f87-control in a terminal.

   To pin the app to Start or the taskbar, find the program with where aula-f87-control-gui, then right-click it and choose Pin to Start.

No driver is needed. Close AULA's own software first if it is running.

• Update: pip install --upgrade aula-f87-control
• Uninstall: pip uninstall aula-f87-control

macOS (untested)

Install it with pip3 install aula-f87-control, then run aula-f87-control-gui. macOS may ask you to allow Input Monitoring. Music sync needs a loopback audio device, such as BlackHole, set as the default input.

Using the app

The Ubuntu app uses GTK and looks native on GNOME. Windows and macOS get a simpler window with the same tabs and features, but without the top-bar icon and without starting at login. On Linux you can open that one too, with aula-f87-control gui --tk (needs python3-tk).

What is saved where

• In the keyboard: lighting, per-key colors, side lights and the sleep timer. These stay when you unplug the keyboard or use another computer.

• On this computer: whether music sync is on, its style, sensitivity and brightness, the last tab, the brush color and the window size.

  • Linux: ~/.config/aula-f87-control/settings.json
  • Windows: %APPDATA%\aula-f87-control\settings.json

  If music sync was on when you quit, it starts again the next time the app starts. It also restarts when the keyboard comes back after being unplugged or asleep. Press Stop to keep it off.

Lighting

• Lighting effect. Pick one of the built-in effects. Custom per-key shows your painted keys.
• Color. Pick any color, or click a quick color. Picking a color turns Rainbow off. If the current effect can't use a color, it switches to Static.
• Rainbow. Use all colors instead of a single one.
• Brightness and Speed. Range from 0 to 4. Speed only applies to animated effects.
• Side lights. Choose the effect of the lights on the sides of the case.
• The light bar above the arrow keys is controlled on the keyboard. Press Fn + Left Shift to cycle its effects (see Troubleshooting).

Top-bar icon (Linux)

The keyboard icon in the top bar gives you quick access without opening the window. Over 2.4G, the battery level is shown next to it. Click the icon for this menu:

Closing the window doesn't stop the app. It keeps running in the top bar, so music sync continues with the window closed. Use Quit in the menu to stop it.

The icon needs a top-bar tray. Ubuntu has one built in (the Ubuntu AppIndicators extension). On other GNOME systems, install AppIndicator and KStatusNotifierItem Support. KDE Plasma and most other desktops show it without any extra setup. If there is no tray, closing the window quits the app as usual.

Power

• Battery. Shows the level when the keyboard is on the 2.4G receiver. On the cable it charges, and the keyboard doesn't report a level.
• Keep backlight on. The backlight never turns off when idle. This uses more battery on 2.4G.
• Turn backlight off after. Sets how long the keyboard waits without a key press before the backlight sleeps. Press any key to wake it.

Per-key colors

Click or drag over keys to paint them with the brush color. Right-click a key to clear it. Fill all and Clear all change every key at once. Press Apply to keyboard to save the colors to the keyboard and switch it to the Custom per-key effect.

Music sync

Press Start and play something. The keyboard follows any app's sound: Spotify, YouTube, games, and so on.

• Follow. Picks what the lights react to. Tick one or more:

  Follow	What moves the lights
  All (default)	The whole sound, from deep bass to cymbals
  Bass	Only the low end (30–300 Hz): bass lines and kick drums, spread over the whole keyboard
  Vocals	The voice range (150 Hz–5 kHz), keeping only what sits in the centre of the stereo mix, where singers usually are. Instruments panned to the sides mostly drop out.
  Beat	The kick drum. The keyboard bursts from the middle on every hit.

  Ticked choices are combined. For example, Bass + Beat shows the bass line and flashes on every kick. With mono audio, Vocals can't separate the voice and acts as a mid-range filter.

• Sensitivity. Higher makes the bars taller. The app also adjusts to the volume on its own.

• Brightness. How bright the music lights are.

Music sync sends temporary frames and saves nothing. Your normal lighting comes back about a second after you press Stop. The other tabs are locked while it runs.

Over the cable the keyboard updates about 30 times per second. Over 2.4G it updates 12–20 times per second, because the radio can't take frames any faster.

Command line

You can give --effect as a number or as the start of a name: off, static, breathing, rainbow, flash, raindrops, ripples, twinkling, retro, neon, reactive, sine, rotating, colorful, blossoming, custom.

Troubleshooting

"Permission denied on /dev/hidrawN" (Linux). Install the udev rule from Ubuntu / Debian, then unplug and replug the keyboard or receiver.

"The 2.4G receiver is plugged in but the keyboard is not answering." The keyboard is asleep, switched off, or in Bluetooth mode. Press a key, and check the mode switch on the keyboard. To stop it from falling asleep, turn on Keep backlight on.

"No AULA F87 found." Check the cable or receiver. On Windows, close AULA's own software. Only run one lighting app at a time.

AULA's web driver (hub.aulacn.com) says it can't read the keyboard. The web driver supports newer boards, not the original F87 Pro. Use this app instead.

The light bar above the arrow keys doesn't follow the app or the music. The keyboard controls that bar itself. Press Fn + Left Shift to cycle its effects: off, rainbow wave, rainbow all together, solid, and breathing. It ignores the temporary frames that music sync uses. The keyboard also doesn't reliably apply changes to it from the computer.

Music sync is on but the keys stay dark. Make sure something is playing on the default audio output. On Linux the app needs pw-record (sudo apt install pipewire-bin). Raise Sensitivity if the music is very quiet.

Battery shows "On USB power". That's expected on the cable. The keyboard only reports its level over 2.4G, and over 2.4G it shows "Charging" while the cable is plugged in.

There's no icon in the top bar (Linux). On Ubuntu, run gnome-extensions enable ubuntu-appindicators@ubuntu.com. On other GNOME systems, install the AppIndicator and KStatusNotifierItem Support extension (on Fedora and Arch the package is called gnome-shell-extension-appindicator), then log out and back in. The app is probably still running in the background, so opening it from the app menu shows its window.

I don't want it to start at login. Untick Start at login in the top-bar menu, or reinstall with ./install.sh --no-autostart.

Changes over 2.4G take a moment. Each change takes about half a second over the radio.

The keyboard restarted while I changed a setting. Don't run two lighting apps at the same time. This app locks the other tabs during music sync for this reason.

I want AULA's factory settings back. Hold Fn + Esc for 3 seconds, as described in AULA's manual.

Windows: AttributeError: module 'hid' has no attribute 'device'. A different package called hid is installed. Run pip uninstall hid, then pip install --force-reinstall hidapi.

Is it safe?

• The app sends the same kind of commands as AULA's Windows software. They were worked out by the projects listed in Credits and checked on a real F87 Pro.
• Saving a setting writes it once to the keyboard's memory. Music sync and previews use temporary frames that are never stored, so they don't wear that memory.
• The app never touches the keyboard's firmware.
• This project isn't affiliated with AULA. Use it at your own risk.

How it works

The keyboard has a vendor-specific USB HID interface. Over the cable the app exchanges 520-byte feature reports with it. Over the 2.4G receiver it sends 20-byte output reports, and the keyboard echoes each one. Both carry the same settings blocks: a 128-byte config, a 512-byte color palette and a 378-byte per-key color map.

• Linux: the app talks to /dev/hidraw* directly and records audio with PipeWire's pw-record.
• Windows and macOS: it uses hidapi and soundcard.

docs/PROTOCOL.md documents every byte the app uses.

Contributing

Bug reports and test results are welcome, especially from Windows users and owners of other AULA models. Please open an issue with:

• your keyboard model and connection (cable or 2.4G),
• your operating system,
• the output of aula-f87-control status.

To work on the code:

python3 -m aula_f87                 # run from the source folder
AULA_F87_HID=hidapi python3 -m aula_f87 status      # use the Windows/macOS HID path on Linux
AULA_F87_AUDIO=soundcard python3 -m aula_f87 music  # use the Windows/macOS audio path on Linux

Releases. Bump version in pyproject.toml, add a section to CHANGELOG.md, then push a tag that matches the version, such as git tag v0.3.3 && git push origin v0.3.3. The release.yaml workflow then builds the wheel and the source archive, publishes the GitHub release, and uploads to PyPI through trusted publishing, so no PyPI token is stored anywhere. CI tests installing with pip on Linux and Windows, and runs both quick installers, on every push.

Credits

This app builds on protocol research by:

• marcoslor/Aula-F87-Controller: 2.4G protocol and the audio stream
• veysiemrah/aula-rgb-controller: wired protocol and LED layout
• OpenRGB: SinowealthKeyboard10c direct mode
• ushineko/sanshoku #36 and PyFlat/Device-Battery-Info #6: the battery command

License

GPL-3.0-or-later.