autombist 1.1.2

MBIST wrapper and fault-flow generator

autombist

autombist automatically generates MBIST integration artifacts for OpenRAM-generated SRAM macros. It builds a selectable MBIST wrapper around your memory interface, emits the required MBIST RTL files, and creates outputs under out/ by default.

The generated artifacts can be synthesized with Yosys or other synthesis tools. autombist also supports fault simulation by injecting stuck-at faults (SA0 and SA1) or transition faults (transition-up and transition-down) and validating behavior through Cocotb with Icarus Verilog.

What It Generates

For each memory in your config, autombist generates a module directory under out/<memory_name>/ with:

• MBIST wrapper Verilog
• Required MBIST RTL support files
• Optional saboteur wrapper for fault injection (--test mode)
• Optional fault masks and a local simulation Makefile (--test mode)
• Algorithm-specific RTL for the selected --algo family

Prerequisites

1. Python 3.10+
2. OpenRAM-generated memory and matching config file
3. For fault simulation:
   • Icarus Verilog (iverilog) installed system-wide
   • Cocotb installed in your Python environment

Installation

Install from the repository root:

python -m pip install .

For development:

python -m pip install -e .

Or you can install directly with Pypi:

python -m pip install autombist

Quick Start

Generate MBIST outputs using the default output directory (out):

autombist generate --config config.yml --out out

Run generation + simulation in one step:

autombist run --config config.yml --out out

Fault Simulation Flow

Generate fault-enabled artifacts (saboteur + fault masks + module Makefile):

autombist generate --config config.yml --out out --test --faults 50 --seed 1234 --algo march-c --fault-type stuck-at

This command injects random SA0/SA1 faults into the memory model and writes fault files to:

out/<memory_name>/faults/

Then run simulation:

autombist simulate --out out/<memory_name>

For transition fault simulation, set --fault-type transition-up or --fault-type transition-down, then run autombist simulate --out out/<memory_name>.

OpenRAM Synthesis + Starter Scaffolding

Generate starter files (config.yml, openram.yml, and Makefile) for a new project:

autombist init --out .

Synthesize SRAM through OpenRAM from config:

autombist ram-synth --config openram.yml

Show the exact OpenRAM command before execution:

autombist ram-synth --config openram.yml --show-command

Run installation smoke checks (generation + OpenRAM config parse + optional small fault simulations for coverage):

autombist smoke
autombist smoke --no-sim

Synthesis

Use the generated wrapper and MBIST RTL files in your synthesis flow (for example, Yosys or equivalent EDA tools).

CLI Help

autombist --help
autombist --version