bellhop-py 0.3.0

Async Python library that checks your code into an ephemeral box (RunPod pod or Modal sandbox), runs it, brings the results back, and checks out.

bellhop

Check your code into an ephemeral box, run it, bring the results back, and check out — an async Python library for disposable compute. Two backends: a RunPod pod or a Modal sandbox.

Like a hotel bellhop: it books a room (provisions the box), waits until it's actually ready, carries your luggage up (uploads your code), and when you leave it brings your bags back down (pulls results) and checks out (tears the box down) — so you never leave a box (or a bill) running by accident.

import asyncio
from bellhop import pod, PodConfig

async def main():
    async with pod(PodConfig(gpu="RTX4090")) as p:
        await p.push("./mycode", "/workspace/job")
        r = await p.exec("cd /workspace/job && python train.py")
        print(r.stdout)
        await p.pull("/workspace/job/out", "./results")
    # pod is gone here — even if the body raised

asyncio.run(main())

The same code runs on Modal by swapping the config — sandbox(ModalConfig(...)) instead of pod(PodConfig(...)) (see Two backends below).

The RunPod backend talks to the RunPod REST API (rest.runpod.io/v1) directly over httpx, falling back to the GraphQL API only to set native safety timers. No runpodctl, no vendored SDK. The Modal backend drives a Modal Sandbox via the modal SDK.

Install

pip install bellhop-py           # RunPod backend (or: pip install git+https://github.com/dtch1997/bellhop)
pip install 'bellhop-py[modal]'  # add the Modal backend

(The PyPI distribution is bellhop-py — the bare bellhop name is an unrelated package — but the import name and CLI are plain bellhop.)

For the RunPod backend, set RUNPOD_API_KEY. Connection uses your SSH keypair (~/.ssh/id_ed25519 by default): bellhop injects the public key as the pod's PUBLIC_KEY env so root@pod is reachable. For the Modal backend, configure Modal auth (modal token new, or MODAL_TOKEN_ID / MODAL_TOKEN_SECRET). (GCS upload, if you enable it, needs gcloud on your PATH either way.)

Two backends

Both backends implement the same ExecBox contract — exec / push / pull / exists_remote / teardown — so the high-level run() / run_many() pipeline (below) is provider-agnostic: hand it a PodConfig for RunPod or a ModalConfig for Modal and everything else is identical.

from bellhop import sandbox, ModalConfig

async with sandbox(ModalConfig(gpu="A10G")) as b:   # CPU box: omit gpu
    await b.push("./mycode", "/workspace/job")
    r = await b.exec("cd /workspace/job && python train.py")
    print(r.stdout)
    await b.pull("/workspace/job/out", "./results")
# sandbox terminated on exit (pass keep=True to leave it up)

The whole common surface is spelled the same on both configs:

• gpu= — a canonical short name ("A100", "H100", "L4", …); None means a CPU box. On RunPod the name expands through GPU_ALIASES to the list of matching gpuTypeIds (e.g. "A100" → PCIe and SXM), which the REST API accepts wholesale — better stock availability than naming one SKU. A full RunPod id ("NVIDIA GeForce RTX 4090") still passes verbatim.
• max_lifetime= — the hard server-side kill switch, timedelta on both (maps to terminate_after on RunPod, timeout on Modal).
• image= / image_preset= — the pytorch-cuda preset is pinned to the same torch 2.4.0 + CUDA 12.4 environment on both backends.

What genuinely differs stays backend-specific:

	RunPod (PodConfig, pod())	Modal (ModalConfig, sandbox())
Readiness	SSH/probe wait (below)	none — create() returns an execable box
Extra TTL	stop_after (wall-clock compute halt)	idle_timeout (kill after inactivity)
Image extras	—	pip= / apt=, modal.Image, secrets=, volumes=
Placement	cloud= SECURE/COMMUNITY (+fallback)	region=, cpu=, memory=
Auth	RUNPOD_API_KEY + SSH keypair	Modal token (modal token new)

(stop_after and idle_timeout are deliberately not unified — one is a wall-clock timer, the other an inactivity timer; pretending they're the same concept would be a trap. gpu_id= remains as a legacy spelling of a verbatim RunPod id.)

"Return when functional" — the hard part (RunPod only)

desiredStatus == RUNNING is necessary but not sufficient: sshd / your server typically lags the RUNNING state by 30–60s. So once a pod is routable (RUNNING + public IP + mapped port), bellhop runs a readiness probe until it passes before handing the pod to you. "Functional" is caller-specific, so it's pluggable:

from bellhop import SshProbe, TcpProbe, HttpProbe, LogMarkerProbe

PodConfig(..., ready=SshProbe("true"))            # ssh job pods (default)
PodConfig(..., ready=HttpProbe(8000, "/health"))  # a served endpoint
PodConfig(..., ready=LogMarkerProbe("server up")) # headless pods

(Modal sandboxes are execable as soon as create() returns, so there's no probe step on that backend.)

Two ways to use it

Composable pod — multi-step / interactive

Keep one pod alive and run many steps against it:

async with pod(PodConfig(gpu="RTX4090")) as p:
    await p.push("./code", "/workspace/job")
    await p.exec("cd /workspace/job && python train.py", env={"HF_TOKEN": tok})
    await p.exec("python eval.py")                  # same pod, no re-provision
    await p.pull("/workspace/job/results", "./out")
    print(p.proxy_url(8000))                         # https://<id>-8000.proxy.runpod.net
# torn down on exit (pass keep=True to leave it up)

One-shot — provision, run, collect, done

import asyncio
from bellhop import run, RunSpec, PodConfig

res = asyncio.run(run(
    RunSpec(slug="demo", codebase="./mycode", run="python go.py"),
    PodConfig(gpu="A100"),      # ModalConfig(gpu="A100") runs the same pipeline on Modal
))
print(res.remote_exit, res.local_results)

run() provisions → waits-functional → uploads the codebase (local dir or git URL) → runs setup then run (tee'd to results/run.log) → pulls the results dir back → optionally uploads to GCS → tears down → returns a RunResult. Pass a ModalConfig instead of a PodConfig to run the exact same pipeline on a Modal sandbox.

CLI equivalent — the same --gpu flag works on both backends (omit it for a CPU box):

bellhop run --slug demo --codebase ./mycode --run "python go.py" --gpu A100
bellhop run --backend modal --slug demo --codebase ./mycode --run "python go.py" --gpu A100

Fan out a sweep

from dataclasses import replace
from bellhop import run_many

base = RunSpec(slug="sweep", codebase="./code", run="python train.py")
specs = [replace(base, slug=f"lr{lr}", run=f"python train.py --lr {lr}")
         for lr in (1e-4, 3e-4, 1e-3)]
results = await run_many(specs, gpu_cfg, max_concurrency=4)

Cleanup: two layers

When	Handled by
Normal exit, exception, Ctrl-C	the async with block's finally — always tears the pod down (unless keep=True)
The host process itself dies (kill -9, crash, reboot)	native RunPod safety timers (below)

The context manager is the primary guarantee and covers essentially everything. The timers are a backstop for the one case finally can't reach.

Native safety timers

Every GPU pod is created with RunPod's own server-side timers, set atomically at creation so they hold even if your process dies the instant after:

from datetime import timedelta
PodConfig(
    stop_after=timedelta(hours=24),       # halt compute billing; disk persists, restartable
    terminate_after=timedelta(hours=72),  # delete the pod; all billing stops
)
# set either to None to disable

These use the GraphQL podFindAndDeployOnDemand mutation (REST has no TTL field), so setting a timer routes pod creation through GraphQL automatically.

Granularity caveat. RunPod enforces these on a coarse schedule, not minute-precise — a short timer may fire well after its deadline. Treat them as an hours-scale backstop, not a precise kill switch. The async with cleanup is what you should rely on for prompt teardown. Native TTL currently applies to GPU pods only (the on-demand path); CPU pods rely on finally alone.

On the Modal backend the equivalents are first-class create kwargs: ModalConfig(timeout=timedelta(hours=24)) is the hard max lifetime and idle_timeout=timedelta(minutes=30) terminates the sandbox after inactivity — no GraphQL detour, and they apply to CPU and GPU sandboxes alike.

The backend-agnostic spelling of the hard kill is max_lifetime=timedelta(...) — set it on either config (or --max-lifetime-hours on the CLI) and it maps to terminate_after on RunPod and timeout on Modal, taking precedence over those fields.

Optional: persist results to GCS

Off by default. Pass gcs_base (or --gcs-base) to upload the pulled results to Google Cloud Storage from your machine (credentials never touch the pod):

RunSpec(slug="demo", codebase="./code", run="python go.py",
        gcs_base="gs://your-bucket/experiments")
# res.gcs_uri and res.retrieve_cmd are populated

Typed errors

BellhopError subclasses let you branch on failure mode: PreflightError (bad config / missing key / modal not installed), ProvisionError (pod or sandbox create failed), PodNotReadyError (never became functional), RemoteJobError (carries .remote_exit + .log_tail), ResultsMissingError, GcsUploadError. (RunpodError is a back-compat alias for BellhopError.)

Notes

• Code/result transfer is tar-over-ssh on RunPod and tar-over-exec on Modal — only needs tar in the image (no rsync; on RunPod also ssh).
• Env vars passed to exec(env=...) never appear in the box's process list: RunPod exports them inside a script fed over stdin; Modal passes them over its API, not argv.
• On out-of-stock, a RunPod COMMUNITY request retries on SECURE automatically (toggle with cloud_fallback=False).
• The Modal default image is debian_slim with git + tar; add packages with ModalConfig(pip=[...], apt=[...]), or supply your own modal.Image / registry ref (assumed to already have tar).

Development

pip install -e ".[dev]"
pytest                              # offline unit tests (no pod/sandbox, no cost)
RUNPOD_LIVE=1 pytest tests/integration_live.py -s     # billed RunPod end-to-end test
MODAL_LIVE=1  pytest tests/integration_modal.py -s    # billed Modal end-to-end test

License

MIT