Besen Python library

besen is an async Python client for Besen EV chargers over Bluetooth Low Energy. It provides connection management, PIN authentication, protocol parsing, typed state models, and charger commands.

Home Assistant users don't need to install it; the Besen integration does that automatically.

Installation

For standalone Python applications:

pip install besen

Python 3.12 or newer is required. The library has been verified with a Besen BS20. Other Besen chargers advertising as ACP#... and using the same BLE protocol may also work.

Basic usage

Applications provide the BLE device lookup function. This keeps discovery policy outside the library, so callers can use bleak, Home Assistant Bluetooth helpers, or another BLE stack integration.

Replace the example address and PIN with your charger's values. This example observes state updates for one minute; it does not start or stop charging. Disconnect other apps or bridges from the charger before running it.

import asyncio
import logging

from bleak import BleakScanner
from bleak.backends.device import BLEDevice

from besen import BesenClient, BesenData

ADDRESS = "AA:BB:CC:DD:EE:FF"
PIN = "123456"


async def main() -> None:
    logging.basicConfig(level=logging.INFO)
    logger = logging.getLogger("besen")

    device = await BleakScanner.find_device_by_address(ADDRESS, timeout=10.0)
    if device is None:
        raise RuntimeError("Charger was not found")

    def device_provider() -> BLEDevice | None:
        return device

    client = BesenClient(
        address=ADDRESS,
        pin=PIN,
        ble_device_provider=device_provider,
        logger=logger,
    )

    def handle_update(data: BesenData) -> None:
        print(
            "available=",
            data.available,
            "charging=",
            data.charge.charger_status,
            "power_w=",
            data.charge.power,
            "session_kwh=",
            data.charge.session_energy,
        )

    remove_listener = client.add_listener(handle_update)

    try:
        await client.async_start()
        await asyncio.sleep(60)
    finally:
        remove_listener()
        await client.async_stop()


asyncio.run(main())

Client API

Create one BesenClient per charger:

client = BesenClient(
    address="AA:BB:CC:DD:EE:FF",
    pin="123456",
    ble_device_provider=device_provider,
    logger=logger,
    advertised_name="ACP#Garage",
    sync_clock=True,
)

The BLE device provider is called before connection attempts and reconnects. It must return a connectable bleak.backends.device.BLEDevice or None when no connectable path is available.

Lifecycle and state

• await client.async_start() connects, subscribes to notifications, and completes the charger login flow.
• await client.async_stop() cancels background tasks and disconnects.
• client.add_listener(callback) registers a synchronous state callback and returns a function that removes it.
• client.state returns the latest BesenData snapshot.
• client.is_connected reports whether the underlying BLE connection is open.

Control methods

These methods can change the charger or operate real charging hardware. Test them manually with appropriate supervision before using them in an automation.

• await client.async_start_charging(amps=None)
• await client.async_stop_charging()
• await client.async_set_charge_amps(amps)
• await client.async_refresh_charge_amps()
• await client.async_set_lcd_brightness(brightness)
• await client.async_set_temperature_unit(unit)
• await client.async_set_language(language)
• await client.async_set_device_name(name)
• await client.async_refresh_config()

State model

State updates are immutable dataclasses. Every listener receives a full BesenData snapshot.

Important fields:

• BesenData.available: whether the latest BLE state is usable.
• BesenData.authenticated: whether the PIN login flow completed.
• BesenData.auth_failed: whether the charger explicitly rejected the PIN. Automatic reconnects stop until a new login is started; a Bluetooth outage or incomplete login does not set it.
• BesenData.info: charger metadata such as serial, model, phases, firmware, and board revision.
• BesenData.config: configuration values such as charge amps, device name, language, temperature unit, LCD brightness, and RSSI.
• BesenData.charge: live charging state such as voltage, current, energy, temperature, plug state, output state, and charger status.
• BesenData.last_command: last parsed command response.
• BesenData.last_error: last connection, protocol, or command error string.

Important telemetry fields:

• BesenData.charge.power: charger-reported charging power in watts.
• BesenData.charge.total_energy: lifetime energy counter in kWh.
• BesenData.charge.session_energy: energy delivered during the current or most recently completed charging session in kWh.
• BesenData.charge.session_start and scheduled_start: timezone-aware UTC datetimes from the latest session report, or None when unset. The scheduled start is the requested start time, which the firmware calls a reservation.
• BesenData.charge.session_duration: elapsed session time in seconds.
• BesenData.charge.session_current_limit: current limit recorded for the session in amperes, or None when unset.
• BesenData.charge.charging_time_limit: time after which the charger ends the session in minutes, or None when unset or unlimited.
• BesenData.charge.inner_temp_c and BesenData.charge.outer_temp: temperatures in Celsius, or None when the charger reports an invalid value.
• BesenData.charge.l1_voltage, l2_voltage, and l3_voltage: phase voltages in volts. L2 and L3 are populated only when the charger sends three-phase data.
• BesenData.charge.l1_amperage, l2_amperage, and l3_amperage: phase currents in amperes. L2 and L3 are populated only when the charger sends three-phase data.

Exceptions

All library-specific errors inherit from BesenError.

• CannotConnect: the charger could not be reached or login timed out.
• NoConnectablePath: no active BLE path is available.
• InvalidAuth: the charger rejected the configured PIN.
• ProtocolError: malformed charger data was received.
• CommandFailed: a charger command could not be sent, was invalid, or a start-charging request was rejected or could not be confirmed.

async_start_charging() waits up to 10 seconds for the charger response, including the Bluetooth write. A response with a charging or reservation error raises CommandFailed. A successful response confirms the request, while actual charging state continues to arrive through notifications.

If the response times out, the charging outcome is unknown. The client disconnects and reconnects without automatically sending another start request. Cancellation after sending also retires that Bluetooth session so a late reply cannot be mistaken for the next request's response. Connection cleanup can extend the time before the method exits. Concurrent start requests wait their turn before the 10-second timeout begins. Other command methods retain their existing behavior.

Bluetooth notes

Besen chargers normally allow only one active BLE client connection. Stop other tools or apps that may already be connected to the charger before starting this client.

The client keeps one active BLE connection open, listens for notifications, replies to heartbeats, and schedules reconnects when notifications stop. The caller remains responsible for device discovery, adapter/proxy selection, and deciding when to start or stop the client.

Safety and attribution

This library is not a safety controller. Keep hardware protections, wiring, and current limits appropriate for the installation independently of the software.

The Python library is MIT-licensed, with protocol work based on slespersen/evseMQTT. See LICENSE and NOTICE.md.

Development

See CONTRIBUTING.md for the development setup, checks, and release process. Release notes are in CHANGELOG.md.